Constructing a new optical sensor for monitoring ammonia in water samples using bis(acetylacetoneethylendiamine)-tributylphosphin cobalt(III) tetraphenylborate complex-coated triacetylcellulose.

A new ammonia optical sensor was designed using bis(acetylacetoneethylendiamine)tributylphosphin cobalt(III) tetraphenylborate complex, coated on transparent triacetylcellulose film as membrane. The change in the absorbance of the optode at the maximum wavelength of 408 nm was related to ammonia concentration in aqueous samples. A buffer solution with a pH of 9 (sodium borate-HCl) was used. The optode was fully regenerated in pH 2. The linear dynamic range for determination of ammonia was 3.3 x 10(-4) to 6.9 x 10(-3) mol l(-1) with a detection limit of 5.0 x 10(-5) mol l(-1) and a response time range of 4 - 6 min. This membrane was successfully applied for determination of ammonia in drinking water.     

Novel monohydrogenphosphate sensor based on vanadyl salophen

A novel PVC-based membrane sensor based on vanadyl salophen (VNSP) for determination of trace amounts of monohydrogenphosphate (MHP) ions is introduced. The electrode revealed Nernstian response towards monohydrogenphosphate over the wide concentration range from 1.0×10⁻¹ to 1.0×10⁻⁶ M at the pH of 8.2. The effect of solvent mediator, cationic additives and amount of ion-carrier on the behavior of the sensor was investigated. The sensor shows a short response time (<20 s) in the whole concentration ranges. The selectivity of the electrode is very high, and it can be used for detection of trace amounts of monohydrogenphosphate in the presence of large amounts of other anions. The detection limit of the electrode was 5.0×10⁻⁷ M (48 ng/ml) and it could be used for 14 weeks without any measurable changes in the slope. The potentiometric selectivity coefficients data revealed negligible interference from 16 common anions. It was successfully applied for the direct determination of monohydrogenphosphate in fertilizer samples and, as an indicator electrode, in potentiometric titration of HPO₄²⁻ ion with barium nitrate.     

A digital pseudo-random number generator based on sawtooth chaotic map with a guaranteed enhanced period

Nonlinear Dynamics - We investigate tunneling behavior between two bright solitons in a Bose–Einstein condensate with attractive contact interactions between atoms. The explicit tunneling...     

Sonochemical Synthesis and Photocatalytic Properties of Metal Hydroxide and Carbonate (M:Mg, Ca, Sr or Ba) Nanoparticles

In this work Mg(OH)₂, Ca(OH)₂, CaCO₃, SrCO₃ and BaCO₃ nanoparticles were synthesized via a simple sonochemical reaction at room temperature. Nanoparticles were synthesized via a surfactant-free reaction solvent water. Nanostructures materials were characterized by scanning electron microscopy, X-ray diffraction and fourier transform infrared spectroscopy. The photocatalytic behavior of nanoparticles was evaluated using the degradation of a methyl orange aqueous solution under ultraviolet light irradiation. The results show that metal hydroxide and metal carbonate nanoparticles are promising materials with excellent performance in photocatalytic applications.     

Asymmetric and axisymmetric vibrations of finite transversely isotropic circular cylinders

This paper presents an approach for obtaining the exact frequency equations of axisymmetric and asymmetric free vibrations of transversely isotropic circular cylinders. The solution method is based on the three dimensional theory of linear elasticity and uses potential functions. Using this approach, the frequency spectra and vibration mode shapes are plotted for a number of transversely isotropic cylinders. The proposed approach introduces a number of merits compared to earlier approximate and exact solution methods. First, unlike numerically complicated series methods that provide approximate solutions, the proposed approach is exact. Second, combination of scalar functions employed for representing the displacement field is consistent with the physics of the problem. One scalar potential function has been considered for each component of the wave field inside the elastic cylinder. As a result, the solution is systematically divided into coupled and decoupled equations. In addition, by using this approach, there is no need to guess the final of the solution a priori. These merits make the proposed approach suitable for other vibration problems of anisotropic materials.     

Non-Abelianizable First Class Constraints

We study the necessary and sufficient conditions on Abelianizable first class constraints. The necessary condition is derived from topological considerations on the structure of the gauge group. The sufficient condition is obtained by applying the implicit function theorem in calculus and studying the local structure of gauge orbits. Since the sufficient condition is necessary for the existence of proper gauge fixing conditions, we conclude that in the case of a finite set of non-Abelianizable first class constraints, the Faddeev-Popov determinant is vanishing for any choice of subsidiary constraints. This result is explicitly examined for the SO(3) gauge invariant model.Acknowledgement The financial support of Isfahan University of Technology (IUT) is acknowledged.     

Circumferential resonance modes of solid elastic cylinders excited by obliquely incident acoustic waves

When an immersed solid elastic cylinder is insonified by an obliquely incident plane acoustic wave, some of the resonance modes of the cylinder are excited. These modes are directly related to the incidence angle of the insonifying wave. In this paper, the circumferential resonance modes of such immersed elastic cylinders are studied over a large range of incidence angles and frequencies and physical explanations are presented for singular features of the frequency-incidence angle plots. These features include the pairing of one axially guided mode with each transverse whispering gallery mode, the appearance of an anomalous pseudo-Rayleigh in the cylinder at incidence angles greater than the Rayleigh angle, and distortional effects of the longitudinal whispering gallery modes on the entire resonance spectrum of the cylinder. The physical explanations are derived from Resonance Scattering Theory (RST), which is employed to determine the interior displacement field of the cylinder and its dependence on insonification angle.     

Metallation of tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> Schiff base with Mn(II), Co(II), Cu(II) and Zn(II): synthesis,characterization and formation constants measurement

Four Schiff base ligands, salabza-H₂ = N,N′-bis(salicylidene)-2-aminobenzylamine, were synthesized by condensation of one mole of 2-aminobenzylamine and two moles of salicylaldehyde and/or two moles of substituted salicylaldehyde (5-OMe, 5-Br, 5-NO₂). All the four Schiff bases and their Mn(II), Co(II), Cu(II) and Zn(II) complexes are characterized by UV-Vis, FT-IR, ¹H NMR spectroscopy, mass spectrometry and elemental analysis. The formation constants and the Gibbs free energies were measured spectrophotometrically for 1:1 complexes in methanol in constant ionic strength (I = 0.1 mol dm⁻³ NaClO₄) and at 25°C. The data refinement was carried out with the SQUAD program. The trend of formation constants of H₂L¹ with M(II) follows the order: Mn(II) (3.97) < Zn(II) (4.30) < Co(II) (4.89) < Cu(II) (5.73)     

Multiple scattering of an obliquely incident plane acoustic wave from a grating of immersed cylindrical shells

The study of the interaction of acoustic waves with cylindrical structures has numerous applications including the ultrasonic nondestructive testing of materials. In this paper, using a new mathematical model presented for the scattering of obliquely incident plane acoustic waves from a grating of immersed cylindrical shells, a detailed study of the resonant interaction of A-wave resonances originating from the shells is conducted. The nature of A-wave resonances and the effect of center-to-center distance of the shells on these resonances are examined. It is observed that this resonant interaction not only results in the splitting of A-wave resonances, but also causes an increase in resonance amplitudes. This interaction phenomenon is not seen in Rayleigh, whispering gallery and guided wave resonances. It is also shown that increasing the angle of wave incidence to the grating weakens the A-wave resonant interactions. The numerical results obtained from the mathematical model are compared to experimental results available in the literature for gratings composed of two and three aluminum shells. The numerical results are in very good agreement with their experimental counterparts.     

Correlation between helical surface waves and guided modes of an infinite immersed elastic cylinder

Scattering of obliquely incident plane acoustic waves from immersed infinite solid elastic cylinders is a complex phenomenon that involves generation of various types of surface waves on the body of the cylinder. Mitri [F.G. Mitri, Acoustic backscattering enhancement resulting from the interaction of an obliquely incident plane wave with an infinite cylinder, Ultrasonics 50 (2010) 675-682] recently showed that for a solid aluminum cylinder, there exist acoustic backscattering enhancements at a normalized frequency of ka?0.1. The incidence angle α_c at which these enhancements are observed lies between the first (longitudinal) and second (shear) coupling angles of the cylinder. He also confirmed the observations previously reported by the authors that there exist backscattering enhancements of the dipole mode at large angles of incidence where no wave penetration into the cylinder is expected. In this paper, physical explanations are provided for the aforementioned observations by establishing a correlation between helical surface waves generated by oblique insonification of an immersed infinite solid elastic cylinder and the longitudinal and flexural guided modes that can propagate along the cylinder. In particular, it is shown that the backscattering enhancement observed at ka?0.1 is due to the excitation of the first longitudinal guided mode travelling at the bar velocity along the cylinder. It is also demonstrated that the dipole resonance mode observed at incidence angles larger than the Rayleigh coupling angle is associated with the first flexural guided mode of the cylinder. The correlation established between the scattering and propagation problems can be used in both numerical and experimental studies of interaction of mechanical waves with cylinders.