Novel monohydrogenphosphate sensor based on vanadyl salophen

A novel PVC-based membrane sensor based on vanadyl salophen (VNSP) for determination of trace amounts of monohydrogenphosphate (MHP) ions is introduced. The electrode revealed Nernstian response towards monohydrogenphosphate over the wide concentration range from 1.0×10⁻¹ to 1.0×10⁻⁶ M at the pH of 8.2. The effect of solvent mediator, cationic additives and amount of ion-carrier on the behavior of the sensor was investigated. The sensor shows a short response time (<20 s) in the whole concentration ranges. The selectivity of the electrode is very high, and it can be used for detection of trace amounts of monohydrogenphosphate in the presence of large amounts of other anions. The detection limit of the electrode was 5.0×10⁻⁷ M (48 ng/ml) and it could be used for 14 weeks without any measurable changes in the slope. The potentiometric selectivity coefficients data revealed negligible interference from 16 common anions. It was successfully applied for the direct determination of monohydrogenphosphate in fertilizer samples and, as an indicator electrode, in potentiometric titration of HPO₄²⁻ ion with barium nitrate.     

The photolysis of poly(p-hydroxystyrene)

The photochemistry of poly(p-hydroxystyrene) (PPHS) has been investigated, thin films being exposed to 254 nm radiation under high vacuum at 298K. H₂ is the principal volatile product, but small amounts of H₂O are also formed. The polymer becomes rapidly coloured, but unlike other styrene polymers, which remain yellow, PPHS undergoes a progressive colour change from yellow through orange to brown. Infrared spectral data indicate the depletion of OH group concentration, and a concomitant formation of carbonyl, possibly quinonoid species. Crosslinking is rapid and no chain scission was detected. It is likely that the polymeric phenoxy radicals formed by photolysis or by subsequent H-abstraction contribute to the formation of both quinonoid species and crosslinks. The mechanism of the photolysis is discussed.     

Kinetic study of triphenylphosphine addition to para‐benzoquinone

Kinetics of the addition reaction of triphenylphosphine to para‐benzoquinone in 1,2‐dichloroethane as solvent was studied. Initial rate method was used to determine the order of the reaction with respect to the reactants. Pseudo‐first‐order method was also used to calculate the rate constant. This reaction was monitored by UV‐vis spectrophotometry at 520 nm by variable time method. On the basis of the obtained results, the Arrhenius equation of this reaction was obtained: The activation parameters, E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 5.701, 6.294, 19.958 kcal mol^?1 and ?45.853 cal mol^?1 K^?1, respectively. This reaction is first and second order with respect to triphenylphosphine and para‐benzoquinone, respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:472–479, 2004     

A digital pseudo-random number generator based on sawtooth chaotic map with a guaranteed enhanced period

Nonlinear Dynamics - We investigate tunneling behavior between two bright solitons in a Bose–Einstein condensate with attractive contact interactions between atoms. The explicit tunneling...     

Sonochemical Synthesis and Photocatalytic Properties of Metal Hydroxide and Carbonate (M:Mg, Ca, Sr or Ba) Nanoparticles

In this work Mg(OH)₂, Ca(OH)₂, CaCO₃, SrCO₃ and BaCO₃ nanoparticles were synthesized via a simple sonochemical reaction at room temperature. Nanoparticles were synthesized via a surfactant-free reaction solvent water. Nanostructures materials were characterized by scanning electron microscopy, X-ray diffraction and fourier transform infrared spectroscopy. The photocatalytic behavior of nanoparticles was evaluated using the degradation of a methyl orange aqueous solution under ultraviolet light irradiation. The results show that metal hydroxide and metal carbonate nanoparticles are promising materials with excellent performance in photocatalytic applications.     

Heterogenized peroxopolyoxotungstate catalyst on the surface of clicked magnetite‐graphene oxide nanocomposite: Magnetically recoverable epoxidation catalyst

A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H₂O₂ as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.     

Click functionalization of magnetite nanoparticles: A new magnetically recoverable catalyst for the selective epoxidation of olefins

A new magnetically recoverable heterogeneous molybdenum catalyst was developed by means of a click chemistry approach. First, silica‐coated magnetite nanoparticles were functionalized using a bidentate ligand via thiol–ene click reaction of mercaptopropyl‐modified magnetite nanoparticles with acrylic acid. Then, a molybdenum complex was covalently supported on the surface of the clicked silica‐coated magnetite nanoparticles. The prepared catalyst was characterized using Fourier transform infrared and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry and transmission electron microscopy. The catalytic performance of the prepared heterogeneous catalyst was investigated in the epoxidation of olefins with tert‐butyl hydroperoxide as oxidant. This catalyst could be reused for five runs without significant loss of activity and selectivity.     

Cup-shaped E,E-stilbenophane: synthesis,crystal structure and supramolecular chemistry

A new E,E-stilbenophane was synthesised and characterised. The crystal structure of this cyclophane shows that this molecule has a cup-shaped structure, which hosts a phenyl ring of neighbouring molecule as guest in its cavity with a π–π distance of about 3.7 Å. Moreover, the NMR spectra and theoretical analysis (gauge-independent atomic orbitals (GIAO) and quantum theory of atoms in molecules (QTAIM)) suggest that the silver recognition by E,E-stilbenophane host molecules is based on cation–π interactions in which the π-electrons of the double bonds play a major role.     

Time-dependent discrete road network design with both tactical and strategic decisions

This paper aims to model and investigate the discrete urban road network design problem, using a multi-objective time-dependent decision-making approach. Given a base network made up with two-way links, candidate link expansion projects, and candidate link construction projects, the problem determines the optimal combination of one-way and two-way links, the optimal selection of capacity expansion projects, and the optimal lane allocations on two-way links over a dual time scale. The problem considers both the total travel time and the total CO emissions as the two objective function measures. The problem is modelled using a time-dependent approach that considers a planning horizon of multiple years and both morning and evening peaks. Under this approach, the model allows determining the sequence of link construction, the expansion projects over a predetermined planning horizon, the configuration of street orientations, and the lane allocations for morning and evening peaks in each year of the planning horizon. This model is formulated as a mixed-integer programming problem with mathematical equilibrium constraints. In this regard, two multi-objective metaheuristics, including a modified non-dominated sorting genetic algorithm (NSGA-II) and a multi-objective B-cell algorithm, are proposed to solve the above-mentioned problem. Computational results for various test networks are also presented in this paper.