Multisites Cr3+ in GGG and GSGG garnets

The emission and excitation spectra of Cr³⁺ -doped Gd₃Ga₅O₁₂ (GGG) and Gd₃Sc₂Ga₃O₁₂ (GSGG) are explained in the light of multisite effects. The situation is particularly complicated in the case of GSGG, where the different sites have²E energy levels near each other which overlap with the⁴A₂ ⁴T₂ absorption bands. The spectra obtained under selective excitations are interpreted on the multisite assumption.     

Vaporisation et dissociation thermique des sulfures de phosphore P4S3, P4S7 et P4S10 a l'etat gazeux

Résumé Nous avons montré par spectrométrie Raman à chaud et mesure des tensions de vapeur que P₄S₃ se vaporise de façon congruente tandis que P₄S₇ et P₄S₁₀ se dissocient dès le début de leur vaporisation. P₄S₇ donne réversiblement P₄S₃ et soufre. P₄S₁₀ se dissocie irréversiblement en P₄S₇ et soufre. A l'état de vapeur non saturante, P₄S₃ se dissocie au-dessus de 600° avec formation de phosphore, de soufre et d'autres espèces non identifiées.Nous avons mesuré expérimentalement la capacité calorifique de P₄S₃ liquide, calculé celle de P₄S₃ gazeux et son entropie standard. Nous avons aussi estimé l'enthalpie standard de vaporisation de P₄S₃ à l'aide des mesures des tensions de vapeur saturante. Nous en avons déduit l'entropie standard de P₄S₃ liquide et son point d'ébullition.

---

It is shown by Raman spectroscopy at high temperature and by vapor tensimetric measurements that the vaporisation of P₄S₃ is congruent, whereas P₄S₇ and P₄S₁₀ dissociate at the beginning of vaporisation. P₄S₇ gives P₄S₃ and sulfur reversibly. The dissociation of P₄S₁₀ into P₄S₇ and sulfur is irreversible. Above 600°, in non-saturated vapour the dissociation of P₄S₃ gives phosphorus, sulfur and some unidentified gaseous species. The heat capacity of liquid P₄S₃ has been measured. That of gaseous P₄S₃ and its standard entropy have been calculated. The vaporisation standard enthalpy of P₄S₃ has been estimated from the experimental results on the saturated vapour pressures. The standard entropy of liquid P₄S₃ and its boiling point have been derived from these data.

---

Zusammenfassung Mittels Raman-Spektrometrie bei erhöhter Temperatur und durch Messung der Dampfdrucke wurde festgestellt, daß sich P₄S₃ verflüchtigt, während P₄S₇ und P₄S₁₀ mit Beginn der Verflüchtigung dissoziieren. P₄S₇ ergibt reversibel P₄S₃ und Schwefel. Im Zustand ungesättigten Dampfes dissoziiert P₄S₃ oberhalb von 600° unter Bildung von Phosphor, Schwefel und anderer nicht identifizierter Substanzen.Die Wärmekapazität von flüssigem P₄S₃ wurde gemessen, während die vom gasförmigem P₄S₃ sowie seine Standard-Entropie berechnet wurden. Die Standard-Enthalpie der Verflüchtigung des P₄S₃ wurde durch Messungen der Sättigungs-Dampfdrucke ermittelt. Daraus wurden die Standard-Entropie des flüssigen P₄S₃ sowie sein Siedepunkt berechnet.

---

- - , P₄S₃ , P₄S₇ P₄S₁₀ . P₄S₇ P₄S₃ , P₄S₁₀ P₄S₇ . 600° P₄S₃ , . P₄S₃, P₄S₃ . P₄S₃. P₄S₃ .

---

---

Nous remercions Monsieur Letoffe du laboratoire du Professeur J. Bousquet, INSA de Lyon, 20 Avenue Albert Einstein 401, 69621 Villeurbanne, qui a r6alis6 pour nous les déterminations expérimentales des capacités calorifiques de P₄S₈ liquide.     

Lanthanide borohydride complexes supported by diaminobis(phenoxide) ligands for the polymerization of epsilon-caprolactone and L- and rac-lactide

Reaction of Na2O2NN' [H2O2NN' = (2-C5H4N)CH2N[2-HO-3,5-C6H2(t)Bu2]2] with M(BH4)3(THF)3 afforded the dimeric, rare-earth borohydride compounds [M(O2NN')(mu-BH4)(THF)n]2 [M = Y(III), n = 0.5 (1-Y); M = NdIII, n = 1 (1-Nd); M = SmIII, n = 0 (1-Sm)]. For comparison the chloride analogues [M(O2NN')(mu-Cl)(THF)n]2 (2-M; M = La(III) or Sm(III), n = 0; M = Nd(III), n = 1) and the corresponding pyridine adducts [M(O2NN')(mu-X)(py)]2 [X = BH4 (3-M) or Cl (4-M); M = La(III), Nd(III), or Sm(III)] were prepared and structurally characterized for 4-La. Compounds 1-M initiated the ring-opening polymerization of epsilon-caprolactone. The best molecular weight control (suppression of chain transfer) for all three monomers was found for the samarium system 1-Sm. The most effective heterotactic enrichment (Pr) in the polymerization of rac-lactide was found for 1-Y (P(r) = 87%). Compound 1-Nd catalyzed the block copolymerization of epsilon-caprolactone and L- and rac-lactide provided that epsilon-caprolactone was added first. Attempted block polymerization by the addition of L-lactide first, or random copolymerization of a ca. 1:1 mixture of epsilon-caprolactone and L-lactide, gave only a poly(L-lactide) homopolymer.     

Behaviour of water-soluble dinuclear rhodium complexes in the hydroformylation reaction of oct-1-ene

The biphasic hydroformylation reaction of oct-1-ene, has been investigated by using the water-soluble dinuclear complex [Rh₂(μ-S^tBu)₂(CO)₂(TPPTS)₂] as precursor. Addition of ethanol as a cosolvent dramatically improved the yields but the good regioselectivity in linear aldehyde observed for neat oct-1-ene—water systems (97%) decreased to 83% (for 22% ethanol w/w). It is shown that the dinuclear framework cannot be maintained, that the mononuclear complex [RhH(CO)(TPPTS)₃] is formed, and that thiol and significant amounts of [Rh₂(μ-S^tBu)₂(CO)₄] move into the organic phase. This reaction from the dinuclear species requires the simultaneous presence of water and carbon monoxide. Introduction of the water-soluble thiol HS(CH₂)₃NMe₂ in the bridging positions affords the complex [Rh₂(μ-S(CH ₂)₃NHMe₂)₂(CO)₂(TPPTS)₂]Cl₂ which can be kept in the aqueous hase but has a low level of catalytic activity.     

Influence of methyl‐modified silyl groups on the properties of polymers and Si/B/N/C ceramics derived from N‐silylated borazine derivatives

Thermal silazane cleavage of dichloroboryldisilylamines (SiCl_mMe_3?m)N(SiMe₃)(BCl₂) (1: m = 1; 2: m = 2) at 196 °C leads to the borazine derivates [(SiCl_mMe_3?m)NB(Cl_nMe_1?n)]₃ (3: m = 1, n = 0.185; 4: m = 2, n = 0.111) characterized by NMR and IR spectroscopy and mass spectrometry. Single‐crystal X‐ray diffraction structure analyses reveal (BN)₃ units with unusual twisted boat conformations in both compounds. Additionally, more detailed studies are done to clear up the function of the by‐products (SiCl_mMe_3?m)N(SiClMe₂)(BClMe) formed during the cyclization step leading to asymmetrically boron substituted borazine derivatives. The single‐source precursors 3 and 4 were cross‐linked with methylamine producing polymers 3P and 4P, which were transformed into black amorphous materials with ceramic yields of 20.8 % and 50.3 %, respectively. Ceramic 4C (Si_1.00B_0.98 N_2.55 C_1.37O_0.05) was further investigated by ¹¹B and ²⁹Si magic angle spinning (MAS) NMR spectroscopy. A combined study of high‐temperature TG analyses and X‐ray powder diffraction analyses confirms the thermal stability of 4C up to 1670 °C. Copyright © 2012 John Wiley & Sons, Ltd.     

Phenyliodine(III) Diacetate/I2-Mediated Domino Approach for Pyrrolo[1,4]Thiazines and 1,4-Thiazines by a One-Pot Morin Rearrangement of N,S-Acetals

An efficient domino transformation using a phenyliodine(III) diacetate (PIDA)/I₂ combination towards Morin 1,4-thiazine compounds has been developed starting from N,S-acetals. The latter leads to “one-step” regioselective methylene insertion without the need for traditional sulfoxide intermediates in good yields. The reaction involves easily accessible N,S-acetals obtained from cost-effective basic ketones and cysteamine as starting materials. This process ultimately leads to 1,4-thiazines related to natural product and fused derivatives necessary for further QSAR study.     

A De Giorgi–Type Conjecture for Minimal Solutions to a Nonlinear Stokes Equation

We study the one-dimensional symmetry of solutions to the nonlinear Stokes equation which are periodic in the d − 1 last variables (living on the torus 𝕋^d−1) and globally minimize the corresponding energy in Ω = ℝ × 𝕋^d−1, i.e., Namely, we find a class of nonlinear potentials W ≥ 0 such that any global minimizer u of E connecting two zeros of W as x₁ → ± ∞ is one-dimensional; i.e., u depends only on the x₁ -variable. In particular, this class includes in dimension d = 2 the nonlinearities with w being a harmonic function or a solution to the wave equation, while in dimension d ≥ 3 , this class contains a perturbation of the Ginzburg-Landau potential as well as potentials W having d + 1 wells with prescribed transition cost between the wells. For that, we develop a theory of calibrations relying on the notion of entropy (coming from scalar conservation laws). We also study the problem of the existence of global minimizers of E for general potentials W providing in particular compactness results for uniformly finite energy maps u in Ω connecting two wells of W as x₁ → ± ∞ . © 2019 Wiley Periodicals, Inc.     

In-house validation for analytical methods and quality control for risk evaluation of chlordecone in food

Chlordecone was used until 1993 as a pesticide in the banana plantation of Martinique and Guadeloupe (French Antilles) against the root borer. This organochlorine pesticide was lipophilic, remnant, and toxic for human beings with both acute and chronic effects. Chlordecone was strongly absorbed and stored in soil and weakly decomposed in environment. Surveys conducted in 2001 revealed its presence in soil, rivers, and domestic food products. Local food (fruits and vegetables, cattle, poultry, and fish) was growing on soils, widely contaminated by chlordecone, used in the past as banana plantations. In 2003, French Administration asked for a risk evaluation for the Antilles population. The French Agency for Food Safety, proposed a Provisional Tolerable Daily Intake of 0.0005?mg?kg^?1?b.w.?day^?1, and an Acute Reference Dose of 0.01?mg?kg^?1?b.w.?day^?1, based on a toxicological risk assessment. The French National Reference Laboratory for pesticides has carried out two analytical methods, one for food of animal origin and another for food of fruit and vegetable origin. These methods were validated in the reference laboratory and dispatched to 13 laboratories for a proficiency test before the launch of two studies on Martinique and Guadeloupe food. About 900 samples from Martinique were sent to the network of laboratories for analysis of chlordecone. Performance parameters obtained through the proficiency test were briefly reported. The quality control test proposed in this study was discussed to shed light on the true variability achievable by intra-laboratory and inter-laboratory analysis. The limits of conventional quality-control procedures were discussed, and a process was proposed in order to get better confidence in analytical results.