Unexpected end‐groups of poly(acrylic acid) prepared by RAFT polymerization

Low‐molecular‐weight poly(acrylic acid) (PAA) was synthesized by reversible addition fragmentation chain transfer polymerization with a trithiocarbonate as chain‐transfer agent (CTA). With a combination of NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, the PAA end‐groups of the polymer were analyzed before and after neutralization by sodium hydroxide. The polymer prior to neutralization is made up of the expected trithiocarbonate chain‐ends and of the H‐terminated chains issued from a reaction of transfer to solvent. After neutralization, the trithiocarbonates are transformed into thiols, disulfides, thiolactones, and additional H‐terminated chains. By quantifying the different end‐groups, it was possible to demonstrate that fragmentation is the rate limiting step in the transfer reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5439–5462, 2004     

Block copolymers of acrylic acid and butyl acrylate prepared by reversible addition–fragmentation chain transfer polymerization: Synthesis,characterization, and use in emulsion polymerization

Amphiphilic block copolymers of poly(acrylic acid‐b‐butyl acrylate) were prepared by reversible addition–fragmentation chain transfer polymerization in a one‐pot reaction. These copolymers were characterized by NMR, static and dynamic light scattering, tensiometry, and size exclusion chromatography. The aggregation characteristics of the copolymers corresponded to those theoretically predicted for a star micelle. In a butyl acrylate and methyl methacrylate emulsion polymerization, low amounts of these copolymers could stabilize latices with solid contents up to 50%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 684–698, 2003     

Studies of solvent effects

The effect of water on the conformational preferences of acetylcholine has been studied within the discrete, the continuum and the combined discrete-continuum models described in parts I and II of this series. All the models lead to the conclusion that the trans-gauche form which is, following refined quantum-mechanical computations, the intrinsically preferred one and the one observed in the crystal of acetylcholine and of a number of analogues should remain also the preferred conformation in water. This result agrees with NMR studies. The results of the empirical discrete model used here compare favorably to those obtained by an ab initio super-molecule treatment. The continuum model utilized here represents a net improvement above such models utilized in other works.     

Proprietes magnetiques et electriques de la phase Ca2MnO4−xFx

The magnetic properties of the antiferromagnetic Ca₂MnO_4?x solid solution (0?x?0,30) are essentially characterized by a weak ferromagnetism with a maximum value for x = 0,20. Spin canting results from the competition between the antiferromagnetic super-exchange couplings and the double exchange ferromagnetic interactions due to the presence of manganese in oxidation states + III and + IV. It seems independent of the site of fluorine in the framework. The variation of Weiss constant and ordering temperature withx is also discussed. Electrical conductivity results from a hopping mechanism between Mn³⁺ and Mn⁴⁺ ions. The electrical conductivity presents a maximum when x = 0.10, corresponding to an activation energy minimum.     

In vivo magnetic resonance microscopy of Drosophilae at 9.4 T

In preclinical research, genetic studies have made considerable progress as a result of the development of transgenic animal models of human diseases. Consequently, there is now a need for higher resolution MRI to provide finer details for studies of small animals (rats, mice) or very small animals (insects). One way to address this issue is to work with high-magnetic-field spectrometers (dedicated to small animal imaging) with strong magnetic field gradients. It is also necessary to develop a complete methodology (transmit/receive coil, pulse sequence, fixing system, air supply, anesthesia capabilities, etc.). In this study, we developed noninvasive protocols, both in vitro and in vivo (from coil construction to image generation), for drosophila MRI at 9.4 T. The 10*10*80-μm resolution makes it possible to visualize whole drosophila (head, thorax, abdomen) and internal organs (ovaries, longitudinal and transverse muscles, bowel, proboscis, antennae and optical lobes). We also provide some results obtained with a Drosophila model of muscle degeneration. This opens the way for new applications of structural genetic modification studies using MRI of drosophila.     

Extended defects in shallow implants

Extended defects are often found after ion implantation and annealing of silicon and they are known to affect dopant diffusion. The article reviews the structure and energetics of the most often found extended defects and describes the mechanisms by which all these defects grow in size and transform during annealing. Defects grow by interchanging the Si atoms they are composed of and thus maintain large supersaturations of free Si interstitials in the region. A model has been developped to describe such an evolution in presence of a free surface. It is shown that after low energy implantation, the surface of the wafer may recombine large amounts of these free Si interstitials, driving defects into dissolution before transformation into more stable forms. Received: 21 August 2002 / Accepted: 21 August 2002 / Published online: 12 February 2003 RID="*" ID="*"Corresponding author. Fax: +33-56/2257-999, E-mail: claverie@cemes.fr     

Influence of the thickness of the tunnel layer on the charging characteristics of Si nanocrystals embedded in an ultra-thin SiO2 layer

In this paper, we have studied the effect of the thickness of the initial SiO₂ layer (5–7 nm) on the charge and discharge properties of a 2D array of Si nanoparticles embedded in these SiO₂ layers fabricated by ultra-low-energy ion implantation (ULE-II) and annealing. The structural characteristics of these nanocrystal-based memories (position of the nanocrystals with respect to the electrodes, size and surface density of the particles in the plane) were studied by transmission electron microscopy (TEM) and energy filtered TEM (EF-TEM). Electrical characterizations were performed at room temperature using a nano-MOS capacitor to be able to address only a few nanoparticles (nps). EFTEM gives the measurements of oxide thickness, injection, control and nps distances, size and density. I–V and I–t measurements exhibit current peaks and random telegraph signal fluctuations that can be interpreted as due to quantized charging of the nps and to some electrostatic interactions between the trapped charges and the tunnelling current. We have shown that these characteristics strongly vary with the initial oxide thickness, exhibiting several charging/discharging events for the 7-nm-thick layer while charging events prevail in the case of 5-nm-thick layer. These results indicate that the probability of discharging phenomena is reduced when the tunnel layer thickness decreases.     

Preparative isolation of pseudolaric acids A and B,and their glucosides from the root bark of Pseudolarix kaempferi using high‐speed counter‐current chromatography

In order to provide the chemical markers for the quality control of herbal medicines, four diterpenoids, pseudolaric acids A and B (PAA and PAB), and their glucosides were isolated from the methanol extract of the Chinese herb Pseudolarix kaempferi using high‐speed counter‐current chromatography (HSCCC). The diphase solvent system was n‐hexane/EtOAc/MeOH/H₂O which was used at two ratios (5:5:5:5 and 1:9:4:6 by volume) in the separation of pseudolaric acids and their glycosides, respectively. As a result, PAA (14 mg), PAB (129 mg), PAA‐O‐β‐D ‐glucopyranoside (8 mg, PAAG), and PAB‐O‐β‐D ‐glucopyranoside (42 mg, PABG) were obtained from 0.5 g of the crude extract. Their purities were determined to be above 97% by HPLC analysis. Their chemical structures were confirmed by ¹H and ¹³C NMR analysis or HPLC comparison with the reference compounds.     

Use of headspace solid-phase microextraction for the quantification of poly(3-hydroxybutyrate) in microbial cells

Biopolymers such as poly(hydroxyalkanoates) (PHAs) have received much attention due to their physico-chemical properties, biodegradability, and biocompatibility that make them good candidates for industrial and medical applications. Produced by some microorganisms PHAs accumulate within the cells of these organisms. The optimization of microbial processes to produce PHAs at a lower cost requires rapid and accurate techniques for quantification of the biopolymer in biomass. The present study describes a method based on solid-phase microextraction (SPME) coupled to gas chromatography (GC) for the determination of poly(3-hydroxybutyrate) (PHB) in Alcaligenes latus cells. First PHB was depolymerized by either methanolic or hydrolytic digestion into methyl 3-hydroxybutyrate (Me-3-HB) or crotonic acid (CA), respectively. The resulting analytes were then subjected to analysis by headspace SPME/GC with flame ionization detection (FID). The two depolymerization/SPME/GC-FID methods were optimized and applied to the analysis of PHB in bacterial biomass harvested from a fermentation process that uses A. latus. Results were compared with those obtained using GC-FID analysis of MeOH/CHCl(3) digested samples. Excellent agreement was found between the three methods but the two SPME-based methods were environmentally friendly and easier to perform.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.