Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.     

测量慢弛豫介质的非线性折射率Z扫描方法

对非线性折射率慢弛豫介质的Z扫描理论进行了详细推导,得到了透射光场的表达式.分析表明:对于慢弛豫介质,其Z扫描过程也是非线性折射的累积过程.实验结果与理论分析一致. 关键词：     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

Activity coefficients for NaBr in aqueous ternary solutions with sodium propionate and butyrate from EMF measurements

The activity coefficients of NaBr in the NaBr–NaPropionate–H₂O and NaBr–NaButyrate–H₂O systems were determined from EMF measurements at constant total ionic strength of 0.1 0.5 1.0 1.5 2.0 and 2.5 mol-kg^–1 and at 25° C. The activity coefficients were fitted using Scatchard, Pitzer and Lim equations. Finally the excess Gibbs free energy of these mixtures were also calculated.     

二层多目标规划的最优性条件

本文在集值优化的框架下提出了一个二层多目标规划模型（BLMOP）.利用集值映射的相依导数和相依上导数,给出了几个有关（BLMOP）的弱有效解的必要或充分最优性条件.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.