Monitoring nitrite with optical sensing films

A new, low-cost nitrite sensor was developed by immobilizing a direct indicator dye in an optical sensing film for food and environmental monitoring. This sensor was fabricated by binding Safranine O to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membrane has good durability (>12 months) and a short response time (<8 s). Nitrite can be determined for the range of 0.005-2.00 μg ml⁻¹ with 3δ detection limits of 0.001 μg ml⁻¹. The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, non-toxic and widely available.     

Optical nitrite sensor based on chemical modification of a polymer film

A new, low-cost nitrite sensor was developed by immobilizing a direct indicator dye in an optical sensing film for food and environmental monitoring. This sensor was fabricated by binding gallocyanine to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membrane has good durability (>6 months) and a short response time (<7 s). Nitrite can be determined for the range 0.008-1.50 microg/ml with 3delta detection limits of 1 ng/ml. The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for activating the cellulose support are inexpensive, non-toxic and widely available.     

Gradual Growth of Gold Nanoseeds on Silica for Silica@Gold Core–Shell Nano Applications by Two Different Methods: A Comparison on Structural Properties

This paper describes the homogeneous growth of gold shells on the surfaces of spherical dielectric silica nanoparticle cores by two different approaches: common two-step method (the name) and deposition–precipitation process. The methods basically are different in forming the precursor gold seed particles on silica. The structural and optical properties and morphology of the nanoparticles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), UV–Vis spectrophotometery, and photo luminescence spectroscopy (PL). The results showed that, although in both the methods the core–shell nanoparticles can be reliably prepared in a controlled fashion with a favorable uniformity, but deposition–precipitation method indicated a better mechanical stability while it was more cost and time effective too. A regular red shift, from 488 to 662 nm, and peak broadening was also risen for the striking plasmon absorption peak as gold nanoseeds created by each of the two methods grew in size on silica cores.     

Optical pH Sensor Based On Chemical Modification of Polymer Film

A new low-cost pH sensor developed by immobilizing a direct indicator dye to porous and transparent acetylcellulose film. This sensor was fabricated by binding α-Naphthyl Red and Alizarine Yellow GG to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membranes have good durability (>12 months) and a short response time (<5 s). The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, nontoxic, and widely available. The Alizarine Yellow GG sensor can be used for direct determination of pH in alkaline media without any alkaline error.     

Enhanced rate performance of polypyrrole-coated sulfur/MWCNT cathode material: a kinetic study by electrochemical impedance spectroscopy

Lithium-sulfur batteries have a poor cyclability and inferior rate capability due to the shuttle effect of lithium polysulfides. To solve these problems, a sulfur-coated MWCNT composite (S/MWCNT) was coated with conductive polypyrrole (PPy) to trap the polysulfides and facilitate charge and lithium ion transport. From the contact angle measurement, it is found that the PPy coating improves the wettability of the S/MWCNT composite. Compared with the bare S/MWCNT composite, the PPy-coated S/MWCNT composite cathode exhibited improved cycle stability and high-rate performance. A reversible discharge capacity of 671 mAh g^?1 was maintained after 50 cycles at 3 C for the PPy-coated composite. The effect of PPy coating on kinetic property was investigated by electrochemical impedance spectroscopy (EIS). The electrolyte resistance, surface film resistance, charge transfer resistance, lithium ion diffusion coefficient, and exchange current density were evaluated from the EIS measurements. The EIS results reveal that the PPy coating increases both Li ion diffusion into the cathode and exchange current density. The as-prepared PPy-coated S/MWCNT composite can be considered to be a promising candidate for high capacity and high-rate performance cathode material.     

Flow injection spectrophotometric determination of ultra trace amounts of oxalic acid

A new simple, sensitive and rapid catalytic-spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between dichromate and Brilliant cresyl blue in acidic media by means of a flow injection analysis method. The color change of Brilliant cresyl blue due to its oxidation was monitored spectrophotometrically at 625 nm. The calibration graph was linear in the range of 0.020–4.70 μg/mL oxalic acid with a limit of detection 0.005 μg/mL of oxalic acid. The relative standard deviation for ten replicate measurements of 0.020 μg/mL and 0.900 μg/mL was 2.2% and 1.7%, respectively. No serious interference was identified. Oxalic acid was determined in wastewater and in spinach by the proposed method with satisfactory results. Received: 28 October 1999 / Revised: 13 January 2000 / /Accepted: 20 January 2000     

Improving the self-discharge behavior of sulfur-polypyrrole cathode material by LiNO3 electrolyte additive

Self-discharge characteristics of Li/S cells using pure sulfur and sulfur-polypyrrole (S-PPy) cathode materials and lithium bis(trifluoromethane)sulfonimide (LiTFSI) as the electrolyte salt were investigated by monitoring the open circuit voltage, the electrochemical impedance change, and the capacity loss during or after storage at room temperature. Corrosion behavior of the aluminum current collector was studied using linear sweep voltammetry and optical microscope observations of aluminum substrate in aged cells. The results showed that the cell with a pure sulfur cathode suffered from severe self-discharge, which is attributed to the corrosion of the current collector by LiTFSI and a rapid shuttle mechanism. However, a PPy coating on the surface of sulfur particles can suppress the shuttle effect, giving better self-discharge performance. LiNO₃ was investigated as a suitable electrolyte additive to prevent the self-discharge of Li/S cells. A self-discharge rate of 3.1 % was obtained for a cell with an S-PPy cathode and a modified electrolyte containing 0.4 M LiNO₃. It was found that LiNO₃ acts both as a corrosion inhibitor and a shuttle inhibitor. This respectively reduces the transformation of solid sulfur to soluble lithium polysulfides and prevents the dissolved sulfur and generated polysulfides from chemical reaction with the Li anode.     

Flow injection spectrophotometric determination of ultra trace amounts of oxalic acid

A new simple, sensitive and rapid catalytic-spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between dichromate and Brilliant cresyl blue in acidic media by means of a flow injection analysis method. The color change of Brilliant cresyl blue due to its oxidation was monitored spectrophotometrically at 625 nm. The calibration graph was linear in the range of 0.020-4.70 microg/mL oxalic acid with a limit of detection 0.005 microg/mL of oxalic acid. The relative standard deviation for ten replicate measurements of 0.020 microg/mL and 0.900 microg/mL was 2.2% and 1.7%, respectively. No serious interference was identified. Oxalic acid was determined in wastewater and in spinach by the proposed method with satisfactory results.     

PROMETHEE: A comprehensive literature review on methodologies and applications

In recent decades, several Multi-Criteria Decision Aid (MCDA) methods have been proposed to help in selecting the best compromise alternatives. In the meantime, the PROMETHEE (Preference Ranking Organization Method for Enrichment Evaluations) family of outranking methods and their applications has attracted much attention from academics and practitioners. In this paper, a classification scheme and a comprehensive literature review are presented in order to uncover, classify, and interpret the current research on PROMETHEE methodologies and applications. Based on the scheme, 217 scholarly papers from 100 journals are categorized into application areas and non-application papers. The application areas include the papers on the topics of Environment Management, Hydrology and Water Management, Business and Financial Management, Chemistry, Logistics and Transportation, Manufacturing and Assembly, Energy Management, Social, and Other Topics. The last area covers the papers published in several fields: Medicine, Agriculture, Education, Design, Government and Sports. The scholarly papers are also classified by (1) year of publication, (2) journal of publication, (3) authors’ nationality, (4) PROMETHEE as applied with other MCDA methods, and (5) PROMETHEE as applied with GAIA (Geometrical Analysis for Interactive Aid) plane. It is hoped that the paper can meet the needs of researchers and practitioners for easy references of PROMETHEE methodologies and applications, and hence promote the future of PROMETHEE research.