Revisitation of mineralization modes for arsenic and selenium determinations in environmental samples

Mineralization procedures for arsenic and selenium analysis are usually limited to wet digestion methods owing to high volatility of these analytes. On the other hand, variable amounts of silicon in some types of samples imply elaborated mineralization procedures to liberate analytes which may be retained in an insoluble residue. Consequently, methods for such material generally include an hydrofluoric step followed by an evaporation to dryness. This type of mineralization is most easily accomplished using a dry ashing procedure. For plant analysis, a well validated and readily applicable dry ashing method is used for a long time in several laboratories but up today one could suppose that As and Se determinations cannot be performed after such a type of mineralization. Surprisingly, it has been observed that for plant samples these analytes are detected even after a calcination at 450 degrees C. The general usefulness of a dry ashing method for analysis of all other analytes (main, minor and trace elements) incitates us to also verify As and Se recoveries. Results obtained in this work indicate clearly that plants of terrestrial origin may be mineralized using dry ashing procedure without As and Se losses. This statement was confirmed by analyses of several reference terrestrial plant samples (RMs) and laboratory control samples. Another confirmation was given by the direct graphite furnace analysis of the same plant samples but in slurried form (SS-ETAAS). As a direct consequence, As and Se analysis in terrestrial plants no more necessitates a separate preparation methodology. On the other hand, significant losses of As and Se were observed for aquatic plants, e.g. algaes. For the analysis of this type of samples, a separate wet digestion procedure remains unavoidable if the determination of As and Se has to be considered. Also some preparation procedures were tested for As and Se-analysis of soil and sediment reference samples. In these cases the wet digestion with a mixture of nitric, perchloric and hydrofluoric acids seems to remain the best alternative.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Validation and transferability study of a method based on near-infrared hyperspectral imaging for the detection and quantification of ergot bodies in cereals

In recent years, near-infrared (NIR) hyperspectral imaging has proved its suitability for quality and safety control in the cereal sector by allowing spectroscopic images to be collected at single-kernel level, which is of great interest to cereal control laboratories. Contaminants in cereals include, inter alia, impurities such as straw, grains from other crops, and insects, as well as undesirable substances such as ergot (sclerotium of Claviceps purpurea). For the cereal sector, the presence of ergot creates a high toxicity risk for animals and humans because of its alkaloid content. A study was undertaken, in which a complete procedure for detecting ergot bodies in cereals was developed, based on their NIR spectral characteristics. These were used to build relevant decision rules based on chemometric tools and on the morphological information obtained from the NIR images. The study sought to transfer this procedure from a pilot online NIR hyperspectral imaging system at laboratory level to a NIR hyperspectral imaging system at industrial level and to validate the latter. All the analyses performed showed that the results obtained using both NIR hyperspectral imaging cameras were quite stable and repeatable. In addition, a correlation higher than 0.94 was obtained between the predicted values obtained by NIR hyperspectral imaging and those supplied by the stereo-microscopic method which is the reference method. The validation of the transferred protocol on blind samples showed that the method could identify and quantify ergot contamination, demonstrating the transferability of the method. These results were obtained on samples with an ergot concentration of 0.02 % which is less than the EC limit for cereals (intervention grains) destined for humans fixed at 0.05 %.

Determination of processed animal proteins, including meat and bone meal, in animal feed

An intercomparison study was conducted to determine the presence of processed animal proteins (PAPs), including meat and bone meal (MBM) from various species, in animal feed. The performances of different methods, such as microscopy, polymerase chain reaction (PCR), immunoassays, and a protocol based on iquid chromatography (LC), were compared. Laboratories were asked to analyze for PAPs from all terrestrial animals and fish (total PAPs); mammalian PAPs; ruminant PAPs; and porcine PAPs. They were free to use their method of choice. In addition, laboratories using microscopy were asked to determine the presence of PAPs from terrestrial animals, which is applicable only to microscopy. For total PAPs microscopy, LC and some immunoassays showed sufficient results at a concentration as low as 0.1% MBM in the feed. In contrast, PCR was not fit for purpose. In differentiating between MBM from terrestrial animals and fishmeal, microscopy detected 0.5% of terrestrial MBM in feed in the presence of 5% fishmeal, but was less successful when the concentration of MBM from terrestrial animals was 0.1%. The animal-specific determination of MBM from mammals or, more specifically from either ruminants or pigs, by PCR showed poor results, as indicated by a high number of false-positive and false-negative results. The only PCR method that scored quite well was applied by a member of the organizer team of the study. Immunoassays scored much better than PCR, showing sufficient sensitivity but some deficiency in terms of specificity. The results also demonstrated that the reliable determination of MBM from ruminants has not been resolved, especially for low concentrations of MBM (0.1%) in feed. Comparison of the results for mammalian MBM from all methods indicated that, for control purposes, the immunoassay method, especially when applied as dipsticks, could be used as a rapid screening method combined with microscopy to confirm the positive samples. However, implementation of such a system would require that the immunoassays were previously validated to demonstrate that this approach is fit for purpose. The determination of ruminant or porcine PAPs by immunoassays was more difficult, partly because the MBM in this study contained about 50% bovine and porcine material, thereby reducing the target concentration level to 0.05%.     

On chip electrofusion of single human B cells and mouse myeloma cells for efficient hybridoma generation

This article describes the development and full characterization of a microfluidic chip for electrofusion of human peripheral blood B-cells and mouse myeloma (NS-1) cells to generate hybridomas. The chip consists of an array of 783 traps, with dimensions that were optimized to obtain a final cell pairing efficiency of 33±6%. B cells were stained with a cytoplasmic stain CFDA to assess the different stages of cell fusion, i.e. dye transfer to NS-1 cells (initiating fusion) and membrane reorganization (advanced fusion). Six DC pulses of 100 μs (2.5 kV/cm) combined with an AC field (30 s, 2 MHz, 500 V/cm) and pronase treatment resulted in the highest electrofusion efficiency of paired cells (51±11%). Hybridoma formation, with a yield of 0.33 and 1.2%, was observed after culturing the fused cells for 14 days in conditioned medium. This work provides valuable leads to improve the current electrofusion protocols for the production of human antibodies for diagnostic and therapeutic applications.     

Comparison of various chemometric approaches for large near infrared spectroscopic data of feed and feed products

In the present study, different multivariate regression techniques have been applied to two large near-infrared data sets of feed and feed ingredients in order to fulfil the regulations and laws that exist about the chemical composition of these products. The aim of this paper was to compare the performances of different linear and nonlinear multivariate calibration techniques: PLS, ANN and LS-SVM. The results obtained show that ANN and LS-SVM are very powerful methods for non-linearity but LS-SVM can also perform quite well in the case of linear models. Using LS-SVM an improvement of the RMS for independent test sets of 10% is obtained in average compared to ANN and of 24% compared to PLS.     

Transferability study of a near-infrared microscopic method for the detection of banned meat and bone meal in feedingstuffs

Near-infrared microscopy (NIRM) has been proved to be a powerful tool for the detection of banned meat and bone meal (MBM) in feed. The identification of MBM traces and its ability to differentiate animal from vegetable feed ingredients is based on the evaluation of near-infrared spectra obtained from individual particles present in the sample. This evaluation is supported by appropriate decision rules for the absorbances at specific wavelengths. Here we show that the method and the corresponding decision rules can be successfully transferred from the laboratory which constructed the decision rules to two independent laboratories that were not involved in the calibration process of the method. The analytical results from blind feed samples containing MBM (positive samples) and feed samples without MBM (negative samples) revealed a very good agreement between the three laboratories, thus demonstrating the transferability of the method.     

Monofluorinated unsymmetrical bent-core mesogens

The synthesis and mesomorphic properties of 30 bent-core compounds with a fluorine substituent in one of the outer rings are reported. The banana-shaped compounds are all derived from resorcinol and contain esters as linking groups between the five aromatic rings. The different mesophases have been characterized by polarizing optical microscopy, differential scanning calorimetry, X-ray diffraction studies and electro-optical investigations. The compounds with the longer terminal chains exhibit an antiferroelectric SmCP phase. Upon introduction of a fluorine substituent the layer spacing increases, as compared with the corresponding unsubstituted compound. The introduction of one terminal vinyl group in the mono-substituted bent-core mesogens has no significant influence on the liquid crystalline properties and the switching remains antiferroelectric. Due to the introduction of the terminal double bond, these banana-shaped compounds are suitable for the preparation of siloxane polymers or attachment to a hydrogen-terminated silicon surface.     

Key parameters for the development of a NIR microscopic method for the quantification of processed by-products of animal origin in compound feedingstuffs

The aim of this work is to show new advances in the analytical methods developed in the frame of the ban of processed animal by-products in compound feed that is currently applied within the European Union. With this aim, studies to develop a quantitative near infrared microscopy (NIRM) approach have been undertaken in order to fulfil future requirements of European legislation like the introduction of tolerance levels that would require for official control purposes the availability of specific quantitative methods. The capabilities of the NIRM method have been improved; no sample preparation is required and the acquisition parameters are optimised. Both the gross and the fine fractions of the samples are considered; the reflexion mode was used to analyse the gross raw fraction and the transmission mode was chosen to analyse the fine raw fraction. Parameters for reflexion analyses were already fixed in our previous studies while those of transmission mode have been determined in the present study. Because particles are too small, it is difficult to mark them; spectra were collected using the mapping technique. Quantitative analyses have been carried out for different percentages of adulteration (0.5, 1, 2 and 5%). Results were depending on the particle size distribution of the feed and of the fish meal which led to experimental values of adulteration varying between 0.13–0.92%, 0.93–3.7%, 2.42–5.83% and 1.95–9.39% for theoretical percentages of adulteration equal to 0.5, 1, 2 and 5%, respectively. The established protocol with the key parameters proposed has to be considered for the development of an accurate method of quantification.