Clorobiocin biosynthesis in Streptomyces: identification of the halogenase and generation of structural analogs

Clorobiocin (clo) and novobiocin (nov) are potent inhibitors of bacterial DNA gyrase. The two substances differ in the substitution pattern at C-8' of the aminocoumarin ring, carrying a chlorine atom or a methyl group, respectively. By gene inactivation, clo-hal was identified as the gene of the halogenase responsible for the introduction of the chlorine atom of clorobiocin. Inactivation of cloZ did not affect clorobiocin formation, showing that this ORF is not essential for clorobiocin biosynthesis. Expression of the methyltransferase gene novO in the clo-hal(-) mutant led to the very efficient formation of a hybrid antibiotic containing a methyl group instead of a chlorine atom at C-8'. Comparison of the antibacterial activity of clorobiocin analogs with -Cl, -H, or -CH(3) at C-8' showed that chlorine leads to 8-fold higher activity than hydrogen and to 2-fold higher activity than a methyl group.     

Studies on crude oil‐water biphasic mixtures by low‐field NMR

Low‐field ¹H NMR was used in this work for the analysis of mixtures involving crude oils and water. CPMG experiments were performed to determine the transverse relaxation time (T₂) distribution curves, which were computed by the inverse Laplace transform of the echo decay data. The instrument's ability of quantifying water and petroleum in biphasic mixtures following different methodologies was tested. For mixtures between deionized water and petroleum, one achieved excellent results, with root mean squared error of cross‐validation (RMSECV) of 0.8% for a regression between the water content (wt %) and the relative area of the water peak in the T₂ distribution curve, or a standard deviation of 0.9% for the relationship between the water content and the relative water peak area, corrected by the relative hydrogen index of the crude. In the case of biphasic mixtures of Mn²⁺‐doped water and crude oils, the best result of RMSECV = 1.6% was achieved by using the raw magnetization decay data for a partial least squares regression. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of arsenic in diesel, gasoline and naphtha by graphite furnace atomic absorption spectrometry using microemulsion medium for sample stabilization

A procedure for the determination of As in diesel, gasoline and naphtha at μg L⁻¹ levels by GFAAS is proposed. Sample stabilization was achieved by the formation of three component solutions prepared by mixing appropriate volumes of the samples propan-1-ol and nitric acid aqueous solution. This mixture resulted in a one-phase medium, which was indefinitely stable. No changes in the analyte signals were observed over several days in spiked samples, proving long-term stabilization ability. The use of conventional (Pd) and permanent (Ir) modification was investigated and the former was preferred. Central composite design multivariate optimization defined the optimum microemulsion composition as well as the temperature program. In this way, calibration using aqueous analytical solutions was possible, since the same sensitivity was observed in the investigated microemulsion media and in 0.2% v/v HNO₃. Coefficients of correlation larger than 0.999 and an As characteristic mass of 22 pg were observed. Recoveries (n=4) obtained from spiked samples were 98±4, 99±3 and 103±5%, and the limits of detection in the original samples were 1.8, 1.2 and 1.5 μg L⁻¹ for diesel, gasoline and naphtha, respectively. Validation was performed by the analysis of a set of commercial samples by independent comparative procedures. No significant difference (Student’s t-test, p<0.05) was observed between comparative and proposed procedure results. The total determination cycle lasted 4 min for diesel and 3 min for gasoline and naphtha, equivalent to a sample throughput of 7 h⁻¹ for diesel and 10 h⁻¹ for gasoline and naphtha.     

Simultaneous Flow Injection Analysis of Paracetamol and Ascorbic Acid with Multiple Pulse Amperometric Detection

The present work reports a simple and quick strategy for simultaneous determination of paracetamol (PC) and ascorbic acid (AA) in pharmaceutical formulations using flow injection method with multiple pulse amperometric detection. The method allows the resolution of the mixture without chemical pretreatment of the sample or electrode modification or the use of chemometric techniques for data analysis. The compounds are detected by applying four sequential pulses (waveform) in function of time to a three‐electrode amperometric system that uses a wall‐jet cell with gold as working electrode. AA is direct detected at +0.40 V and PC is indirectly detected at 0.0 V by the reduction (desorption) of the oxidation product (N‐acetyl‐p‐benzoquinoneimine) electrochemically generated at +0.65 V. The fourth potential pulse (?0.05 V) is applied for the complete regeneration (cleaning) of the gold electrode surface. The linear response range was optimized between 5 and 24 mg L^?1 for AA and 50 and 240 mg L^?1 for PC. The difference between the two responses ranges (10‐fold) present correlation with the concentration of these compounds in two different pharmaceutical formulations available in the Brazilian market. The analytical frequency was calculated in 60 injections per hour. The use of the proposed methodology for PC quantification in the presence of higher AA concentrations was also carried out. Using the standard addition method, it was possible to detect PC in trace levels (LD=0.2 mg L^?1) in the presence of 880‐fold more of AA (176 mg L^?1).     

Monitoring the polyamide 11 degradation by thermal properties and X‐ray fluorescence spectrometry allied to chemometric methods

The influence of temperature (110 and 120 °C) on the ageing of piping made from polyamide 11 (PA‐11) containing 10–12% of plasticizer was studied using deionized water (pH ≈ 7.0). A clean analytical methodology has been employed for quality control of polymeric materials: energy‐dispersive X‐ray fluorescence spectrometry (ED‐XRF). It provides a fast and suitable technique to characterize chemical elements because of its multielemental capability, good sensitivity, high precision, short analytical time, and nondestructive nature. Herein, the content of additive in PA‐11 was monitored from ED‐XRF measurements where the abundance of the S line is directly related to the ageing time, agreeing with the thermogravimetric analysis. The XRF data were allied to chemometric treatment to classify PA‐11 samples according to the amount of additive and weight average molar mass change, predicting the ageing time, and viscosity values of PA‐11. Therefore, the XRF can be used as a clean analytical methodology to monitor the PA‐11 degradation, thus eliminating the use of toxic organic solvents (necessary to viscosity measurements) and reducing the working time. Also, the effect of hydrolysis on the structure over time and the material morphology were monitored through measurements of dynamic mechanical analysis and differential scanning calorimetry. Copyright © 2012 John Wiley & Sons, Ltd.     

1H and 13C NMR spectral data of bioactive cage‐like polycyclic compounds

Bioactive cage‐like polycyclic compounds have attracted the attention of several research groups because of their unique appearance and their biological activities. Their structures were established on the basis of ¹H NMR and ¹³C NMR spectroscopic data. The ¹H and ¹³C signal assignments and most homonuclear hydrogen coupling constants were assigned by use of techniques such as 1D ¹H and ¹³C NMR and 2D gCOSY, non‐edited gHSQC and gHMBC. The gNOESY experiments proved the endo‐stereochemistry. Copyright © 2010 John Wiley & Sons, Ltd.     

Production of 8'-halogenated and 8'-unsubstituted novobiocin derivatives in genetically engineered streptomyces coelicolor strains

In the present study, we produced a hybrid antibiotic, carrying a chlorine atom instead of a methyl group at position 8 of the aminocoumarin moiety of novobiocin. This compound was not accessible by conventional gene inactivation/gene expression experiments due to difficulties in the genetic manipulation of the novobiocin producer Streptomyces spheroides. However, the desired compound was obtained after modification of the novobiocin biosynthetic gene cluster by using lambda-Red-mediated recombination in Escherichia coli, followed by integration of the resulting modified cosmid into the phiC31 attachment site of Streptomyces coelicolor and coexpression of the halogenase Clo-hal of clorobiocin biosynthesis. The halogenase BhaA, responsible for chlorination of tyrosyl moieties of the glycopeptide antibiotic balhimycin, was unable to functionally replace the halogenase Clo-hal, suggesting that the two enzymes have different substrate specificities.     

Engineered biosynthesis of antiprotealide and other unnatural salinosporamide proteasome inhibitors

A new shunt in the phenylalanine biosynthetic pathway to the nonproteinogenic amino acid L-3-cyclohex-2'-enylalanine was exploited in the marine bacterium Salinispora tropica by mutagenesis to allow for the genetic engineering of unnatural derivatives of the potent proteasome inhibitor salinosporamide A (2) such as antiprotealide (1).