Evaluation of atomic fluorescence, absorption and emission techniques for the determination of mercury

Summary Atomic fluorescence (AFS), absorption (AAS) and emission (AES) systems were evaluated for the determination of inorganic mercury. Identical vapour generation and amalgamation procedures were used to permit direct comparison of the performance of a commercial long-path AAS instrument to laboratory constructed non-dispersive AFS as well as He-MIP based AES instruments. Instrumental noise-limited detection limits (LOD) were 0.94, 2.4, 2.8 pg for AAS, AES and AFS techniques, respectively. Methodological LOD's were found to be blank controlled and similar for all three instruments, viz. 9, 25 and 16 pg for AAS, AFS and AES, respectively. All three systems produced accurate results at the low ng/l concentration, as verified by the analysis of a certified river water reference material (NRCC ORMS-1).     

Anionic oligomerization of methacrylonitrile

The anionic oligomerization of methacrylonitrile by alcoholic solutions of sodium alkoxide in dimethyl sulfoxide, methanol and ethanol was studied. The DP of the oligomers was directly proportional to the monomer concentration and inversely proportional to the alcohol concentration, in accordance with the equation DP = K[MAN]/[ROH], K being equal to K_p/K_tr. The value of K in DMSO (with sodium methoxidemethanol) was 2.9 ± 0.2, in methanol was 1.5 ± 0.1, and in ethanol (with sodium ethoxide as initiator) was 1.9 ± 0.1. The physical properties of the oligomers are given.     

Absolute stereochemistry of citrinadins a and B from marine-derived fungus

[Structure: see text]. Citrinadin A (2) is a pentacyclic indolinone alkaloid isolated from the cultured broth of a fungus, Penicillium citrinum, which was separated from a marine red alga. The absolute stereochemistry of the pentacyclic core in 2 and its new congener, citrinadin B (1), was elucidated by analysis of the ROESY spectrum for the chlorohydrin derivative (3) of 1 as well as comparison of the electronic circular dichroism (ECD) spectra for 1 and 2 with those of known spirooxiindole alkaloids. On the other hand, the absolute configuration at C-21 bearing an epoxide ring was assigned as S by comparison of the vibrational circular dichroism (VCD) spectra of 1 with those of model compounds 2S- and 2R-2,3-epoxy-3,3-dimethyl-1-phenylpropan-1-one (4a and 4b, respectively).     

Spectroscopic and excited-state properties of tri-9-anthrylborane I: Solvent polarity effects

Spectroscopic and excited-state properties of tri-9-anthrylborane (TAB), showing unique absorption and fluorescence characteristics originating from p(boron)-pi(anthryl group) orbital interactions, were studied in 12 solvents. Although the absorption maximum energy (nu(a)) of TAB which appeared at around 21 x 10(3) cm(-1) (band I) was almost independent of the solvent polarity parameter, f(X) (f(X) = (D(s) - 1)/(2D(s) + 1) - (n(2) - 1)/(2n(2) + 1) where D(s) and n represent the static dielectric constant and the refractive index of a solvent, respectively), the fluorescence maximum energy (nu(f)) showed a linear correlation with f(X). The f(X) dependence of the value of nu(a) - nu(f) demonstrated that the change in the dipole moment of TAB upon light excitation was approximately 8.0 D, indicating that absorption band I was ascribed to an intramolecular charge-transfer transition in nature. The excited electron of TAB was thus concluded to localize primarily on the p orbital of the boron atom. Furthermore, it was shown that the fluorescence lifetime and quantum yield of TAB varied from 11.8 to 1.1 ns and from 0.41 to 0.02, respectively, with an increase in f(X). The present results indicated that the nonradiative decay rate constant (k(nr)) of TAB was influenced significantly by f(X). Excited-state decay of TAB was understood by intramolecular back-electron (charge) transfer from the p orbital of the boron atom to the pi orbital of the anthryl group, which was discussed in terms of the energy gap dependence of k(nr). Specific solvent interactions of TAB revealed by the present spectroscopic and photophysical studies are also discussed.     

Amphidinolide X,a novel 16-membered macrodiolide from dinoflagellate Amphidinium sp

A novel cytotoxic 16-membered macrodiolide, amphidinolide X (1), has been isolated from a marine dinoflagellate Amphidinium sp. (strain Y-42). The gross structure of 1 was elucidated on the basis of spectroscopic data including one-bond and long-range (13)C-(13)C correlations. The relative and absolute stereochemistries were determined by combined analyses of NOESY data and (1)H-(1)H and (1)H-(13)C coupling constants of 1 and NMR data of the degradation products. Amphidinolide X (1) is the first macrodiolide consisting of polyketide-derived diacid and diol units from natural sources. The biosynthetic origins of 1 were investigated by means of feeding experiments with (13)C-labeled acetates.     

Determination of magnesium and calcium ions in seawater by capillary zone electrophoresis

Capillary zone electrophoresis is proposed for the determination of magnesium and calcium ions in seawater. A carrier solution containing EDTA was adopted for the complexation of these ions and the effect of sodium chloride concentration in the sample solutions on the results was examined. It was found that magnesium and calcium ions could be determined without any pretreatment by injecting 100-fold diluted seawater samples. Linear calibration graphs were obtained for standard solutions containing up to 10.0 mg/l of calcium ion when both peak area and peak height were used. On the other hand, a linear calibration graph was obtained for standard solutions containing up to 20.0 mg/l of magnesium ion when the peak area was used, while a curved one was obtained when the peak height was used. Relative standard deviations were 0.8 and 1.2% when a standard solution containing 5.0 mg/l of magnesium and 8.0 mg/l of calcium ions was analysed 8 times using the peak area. Limits of detection for magnesium and calcium ions were 0.13 and 0.26 mg/l, respectively. The proposed method was applied to the determination of magnesium and calcium ions in surface and bottom seawater samples.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

Gamma-ray spectra of 201Tl-radiopharmaceuticals with a scintillation camera--crosstalk of contaminating nuclides of 200Tl and/or 202Tl onto 201Tl-photopeaks

In cardiac imaging with 201Tl, the collimator for low energy high resolution is generally used, and also the energy window, which is set on the spectral display of a pulse height analyzer of a scintillation camera, is chosen 70 +/- 12.5 keV. The purpose of this study is to discuss those conditions in 201Tl imaging with the scintillation camera. Two types of collimators for HR (high resolution) and ME (medium energy) were used in this experiment, and we measured the pulse height spectra of 201TlCl radiopharmaceuticals in air and in a cuboid phantom, connecting a multi-channel pulse height analyzer to the scintillation camera. As a result of measuring of the pulse height spectra, two different energies of gamma rays which are not supposed to emit from 201Tl nuclide were observed, and we also identified the presence of a small amount of 202Tl (with 439 keV) and/or 200Tl (with 368 keV) from their half-life measurements. Thus, the use of the HR-collimator with 201Tl imaging is not suitable, because the shielding effects of its septa is poor to 439 keV gamma-rays, and the scattered radiation produced by the Compton interaction contributes to the principal photopeak on the pulse height spectrum. Here, we recommend the use ME-collimator instead of the HR-one, and of the window width of 76 +/- 25 keV for increasing the count rate.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.