Über Antimon-haltige Heterocyclen. I. Molekül- und KristallStruktur von 2-Chlor- 1,3,6-trithia-2-stibaocan

On Antimony Containing Heterocyclic Systems. I. Molecular and Crystal Structure of 2-Chloro-1,3,6-trithia-2-stibaocane 2-Chloro-1,3,6-trithia-2-stibaocane crystallizes in the orthorhombic space group P2₁2₁2₁ with cell dimensions a = 9.054, b = 22.610, c = 9.097 Å and Z = 8. The crystal structure has been determined from single crystal X-ray data and refined to a conventional R of 0.038. The eight-membered ring has deformated boat-conformation with 1,5-intraannular Sb? S-interaction. The coordination of the Sb-atom is ψ-trigonal-bipyramidal with axial distances Sb? Cl 2.51 Å, Sb? S 2.86 Å and equatorial distances Sb? S 2.44 and 2.45 Å. The Sb? S-bond is discussed. The structure consists of 14-coordinated molecules densest packed parallel to the x? y-plane and less densely packed perpendicular to this plane.     

FLUORESCENCE STUDIES WITH HUMAN EPIDERMAL GROWTH FACTOR

Steady-state and time-resolved fluorescence studies have been performed with human epidermal growth factor, a small globular protein having two adjacent tryptophan residues near its C-terminus. Based on the relatively red fluorescence and accessibility to solute quenchers, the two tryptophan residues are found to be exposed to solvent. Anisotropy decay measurements show the dominant depolarizing process to have a sub-nanosecond rotational correlation time indicating the existence of rapid segmental motion of the fluorescing tryptophan residues. From an analysis of the low-temperature excitation anisotropy spectrum of the protein (and in comparison with that of tryptophan, the peptide melittin, and the dipeptide trp-trp), it is concluded that homo-energy transfer and/or exciton interaction occurs between the adjacent tryptophan residues. A thermal transition in the structure of the protein, which is observed by circular dichroism measurements, is not sensed by the steady-state fluorescence of the protein. This result, in conjunction with the anisotropy decay results, indicates that the two tryptophan residues are in a highly flexible C-terminus segment, which is not an integral part of the three-dimensional structure of the protein. Fluorescence measurements with three site-directed mutants also show very little variation.     

Über Chalkogenolate. LVIII. Untersuchungen über Thiomeiensäuren 6. Cyandithioameisensäure und Azidodithioameisensäure

Polymeric cyanodithioformic acid has been prepared by interaction between a solution of Na[NCCS₂]. 3 DMF and HCl(aq). In the gaseous state there exists [NCCS(SH)]_x with x = 1 and 2. The instable crystalline acidodithioformic acid is formed on reaction of Na[N₃CS₂] with HCl(aq). In the gaseous state there exists the monomeric acid N₃CS(SH).     

Effects of cell-wall acetate,xylan backbone,and lignin on enzymatic hydrolysis of aspen wood

Aspen wood substrates with varying degrees of deacetylation, xylan, and lignin removal have been prepared and submitted to enzymatic hydrolysis with a cellulase/hemicellulase preparation for an extended constant period of hydrolysis. Controlled deacetylation has been achieved by treating wood with various alkali metal hydroxide solutions, at various alkali/wood ratios. It has been found that samples with the same extent of deacetylation produce the same sugar yields upon enzymatic hydrolysis. Increased degree of deacetylation increases the yield of sugars obtained from enzymatic hydrolysis, all other compositional parameters held constant. The acetyl group removal is proportional to the stoichiometric relation between added base and wood acetyl content, i.e., the same number of milliequivalents of base/weight of wood remove the same extent of acetyl groups, regardless of the concentration of the base solution. No cation effects are found among Li, Na, and K alkali hydroxide solutions, suggesting that swelling is not as important a parameter as is the removal of the acetyl groups from the xylan backbone in determining the extent of hydrolyzability of the resulting sample.     

Zum mechanismus des strahlenchemischen abbaus von polytetrafluorethylen

The present work studies the changes in polymer structure and the mechanism of the decomposition of polytetrafluoroethylene resin (PTFE) exposed to high energy radiation (electron beam). Spectroscopic and kinetic observations are used to interpret the degradation process. For the first time the decomposition of PTFE has been carried out on a preparative scale and new results obtained by analysing the degradation products. The radiation-induced degradation of PTFE is accompanied by thermal degradation under certain irradiation conditions. This is due to an increase in temperature of the polymer caused by retardation of highly accelerated electrons (heat accumulation effect).The kinetics are discussed in terms of the reactions and recombination of radicals produced by high-energy radiation both in the polymer melt and the polymer surface. These are related to the overall rate of decomposition.The primary radicals formed by decomposition of PTFE in an inert atmosphere (N₂, Ar) react to produce perfluorinated alkanes and alkenes. In the presence of reactive gases the decomposition fragments originated will react rapidly; e.g. if oxygen is present in the reactive area the radicals form perflourinated peroxyl and oxyl radicals which finally stabilize themselves by CC-scission to perfluorocarbon acid fluorides and carbonyldifluorides.     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

Stable,High‐Molecular‐Weight Poly(phthalaldehyde)

Low ceiling temperature, thermodynamically unstable polymers have been troublesome to synthesize and keep stable during storage. In this study, stable poly(phthalaldehyde) has been synthesized with BF₃‐OEt₂ catalyst. The role of BF₃ in the polymerization is described. The interaction of BF₃ with the monomer is described and used to maximize the yield and molecular weight of poly(phthalaldehyde). Various Lewis acids were used to investigate the effect of catalyst acidity on poly(phthalaldehyde) chain growth. In situ nuclear magnetic resonance was used to identify possible interactions formed between BF₃ and phthalaldehyde monomer and polymer. The molecular weight of the polymer tracks with polymerization yield. The ambient temperature stability of poly(phthalaldehyde) was investigated and the storage life of the polymer has been improved. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1166–1172