Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Fluoride effect on the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates

Fluorides promote the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates. The effect is more evident on the rate of the reaction at short reaction times, but a positive effect on selectivity is also observed under certain conditions. The effect is observed even under conditions under which chloride inhibits the reaction. Tetraethylammonium is a better countercation than sodium. Copyright © 2007 John Wiley & Sons, Ltd.     

Dimensionally and thermally stable polymer,containing disordered graphitic structure and adamantane

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane ( 4 ) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl₃ soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state ¹³C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (～25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (～1.21 g/cm³), refractive index (～1.80 at 632 nm), and Young's modulus (～17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006     

Heterogeneous reactions : VI. Reactions of trimethylchlorosilane,dimethyldichlorosilane and chloromethyldimethylchlorosilane with potassium t-butoxide and sodium methoxide

The heterogeneous gas-solid reaction of trimethylchlorosilane and an equal molar mixture of potassium t-butoxide and sodium methoxide gave exclusively trimethyl-t-butoxysilane. A similar reaction utilizing dimethyldichlorosilane as the vapor phase substrate gave predominant incorporation of butoxide. The heterogeneous reaction of chloromethyldimethylchlorosilane with these two bases was extensively studied. The parameters investigated for the latter system include the dependence of the product distribution on temperature, nitrogen flow rate and the relative hydroxide content of the solid alkoxide base. These studies allow the assessment of the relative reactivities of these bases under the conditions of heterogeneous gas/solid reaction. Under these conditions and with partially hydrolyzed bases a substantial amount of displacement of the chloromethyl group from chloromethyldimethylchlorosilane is observed. The role of hydroxide ion in this reaction is discussed. Convenient syntheses of t-butyl methyl ether and dimethylchloromethoxysilane are reported.     

Amino acid analysis by micellar electrokinetic chromatography with laser-induced fluorescence detection: application to nanolitre-volume biological samples from Arabidopsis thaliana and Myzus persicae

Amino acids were derivatised with 4-fluoro-7-nitrobenzo-2,1,3-oxadiazol (NBD-F), separated by micellar electrokinetic chromatography (MEKC), and detected by argon-ion (488 nm) laser-induced fluorescence. The optimised MEKC background electrolyte conditions were: 40 mM sodium cholate, 5 mM beta-cyclodextrin in 20 mM aqueous borate buffer, pH 9.1, with 7% v/v acetonitrile. Using these conditions, 19 amino acids were separated within 17 min. The limits of detection were in the range of 7.6-42.2 pmol/mL and limits of quantitation from 0.05-0.14 nmol/mL. The method was systematically validated for injection volume error, migration time variation, calibration linearity, accuracy, precision, and recovery. Nanolitre volume samples of phloem sap of individual sieve element cells from the plant Arabidopsis thaliana and honeydew from the aphid Myzus persicae were directly analysed with this method. Quantitative amino acid concentrations in these two biological matrices were profiled for the first time. This method is particularly important because it allows the complete profile of the amino acids obtained from individual phloem elements, allowing cell to cell and plant to plant variation to be quantified, which to date has not been possible with Arabidopsis thaliana.     

Confirmation of the "long-lived" tetra-nitrogen (N4) molecule using neutralization-reionization mass spectrometry and ab initio calculations

Tetra-nitrogen (N(4)), which has been the subject of recent controversy [Cacace, d. Petris, and Troiani, Science 295, 480 (2002); Cacace, Chem. Eur. J. 8, 3839 (2002); Nguyen et al., J. Phys. Chem. A 107, 5452 (2003); Nguyen, Coord. Chem. Rev. 244, 93 (2003)] as well as of great theoretical interest, has been prepared from the N(4) (+) cation and then detected as a reionized gaseous metastable molecule with a lifetime exceeding 0.8 micros in experiments based on neutralization-reionization mass spectrometry. Moreover, we have used the nature of the charge-transfer reaction which occurs between a beam of fast N(4) (+) ions (8 keV translational energy) and various stationary gas targets to identify the vertical neutralization energy of the N(4) (+) ion. The measured value, 10.3+/-0.5, most closely matches that of the lowest energy azidonitrene (4)N(4) (+)C(s)((4)A(')) ion, resulting in the formation of the neutral bound azidonitrene (3)N(4)C(s)((3)A(")). Neutralization of the global minimum (2)N(4) (+)D( infinity h)((2)Sigma(u) (+)) ion leads to a structure 166 kJ mol(-1) above the dissociation products [N(2)((1)Sigma(g) (+))+N(2)((1)Sigma(g) (+))]; moreover, it was not possible to find a minimum on the (1)N(4) neutral potential energy surface for a covalently bonded structure. Ab initio calculations at the G3, QCISD/6-31G(d), and MP2/AUG-cc-pVTZ levels of theory have been used to determine geometries and both vertical neutralization energies of ions (doublet and quartet) and ionization energies of neutrals (singlet and triplet). In addition, we have also described in detail the EI ion source for the Ottawa VG ZAB mass spectrometer [Holmes and Mayer, J. Phys. Chem. A 99, 1366 (1995)] which was modified for high-pressure use, i.e., for the production of dimer and higher number cluster ions.     

Synthesis of 2-substituted benzofurans and indoles using functionalized titanium benzylidene reagents on solid phase

Titanium(IV) benzylidenes bearing a masked oxygen or nitrogen nucleophile in the ortho position were generated from thioacetals, using low-valent titanocene complex, Cp2Ti[P(OEt)3]2. Methylene acetal, alkyl ether, silyl ether, fluoro, tertiary amino, and N-alkyl, N-benzyl, N-prenyl, and N-silyl tert-butyl carbamate groups were tolerated in the titanium alkylidene reagents (Schrock carbenes). Aryl-chlorine bonds were stable to the titanium benzylidene functionality, but there was poor chemoselectivity for the reduction of the thioacetal in the presence of an aryl chloride. The titanium benzylidenes converted Merrifield and Wang resin-bound esters into enol ethers. The oxygen nucleophile was masked as a TMS ether, and when the resin-bound enol ethers bearing this ortho substituent were treated with 1% TFA in dichloromethane, benzofurans were released from resin in high yields. The chameleon catch strategy ensured excellent purity. In a similar way, N-alkylated and N-silylated tert-butyl carbamates were used for the synthesis of N-alkyl and N-Boc indoles, respectively. These traceless solid-phase syntheses of heterocycles are believed to involve postcleavage modification rather than cyclative termination.     

Aldehyde-functional thermoresponsive diblock copolymer worm gels exhibit strong mucoadhesion

A series of thermoresponsive diblock copolymer worm gels is prepared via reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate using a water-soluble methacrylic precursor bearing pendent cis-diol groups. Selective oxidation using an aqueous solution of sodium periodate affords the corresponding aldehyde-functional worm gels. The aldehyde groups are located within the steric stabilizer chains and the aldehyde content can be adjusted by varying the periodate/cis-diol molar ratio. These aldehyde-functional worm gels are evaluated in terms of their mucoadhesion performance with the aid of a fluorescence microscopy-based assay. Using porcine urinary bladder mucosa as a model substrate, we demonstrate that these worm gels offer a comparable degree of mucoadhesion to that afforded by chitosan, which is widely regarded to be a ‘gold standard’ positive control in this context. The optimum degree of aldehyde functionality is approximately 30%: lower degrees of functionalization lead to weaker mucoadhesion, whereas higher values compromise the desirable thermoresponsive behavior of these worm gels.

Optimizing the aldehyde content of thermoresponsive diblock copolymer worm gels via periodate oxidation leads to mucoadhesion performance comparable to that of chitosan (a gold standard positive control) in a fluorescence assay using porcine mucosa.     

The RHIM of the Immune Adaptor Protein TRIF Forms Hybrid Amyloids with Other Necroptosis-Associated Proteins

TIR-domain-containing adapter-inducing interferon-β (TRIF) is an innate immune protein that serves as an adaptor for multiple cellular signalling outcomes in the context of infection. TRIF is activated via ligation of Toll-like receptors 3 and 4. One outcome of TRIF-directed signalling is the activation of the programmed cell death pathway necroptosis, which is governed by interactions between proteins that contain a RIP Homotypic Interaction Motif (RHIM). TRIF contains a RHIM sequence and can interact with receptor interacting protein kinases 1 (RIPK1) and 3 (RIPK3) to initiate necroptosis. Here, we demonstrate that the RHIM of TRIF is amyloidogenic and supports the formation of homomeric TRIF-containing fibrils. We show that the core tetrad sequence within the RHIM governs the supramolecular organisation of TRIF amyloid assemblies, although the stable amyloid core of TRIF amyloid fibrils comprises a much larger region than the conserved RHIM only. We provide evidence that RHIMs of TRIF, RIPK1 and RIPK3 interact directly to form heteromeric structures and that these TRIF-containing hetero-assemblies display altered and emergent properties that likely underlie necroptosis signalling in response to Toll-like receptor activation.     

A survey of acoustic conditions in semi-open plan classrooms in the United Kingdom

This paper reports the results of a large scale, detailed acoustic survey of 42 open plan classrooms of varying design in the UK each of which contained between 2 and 14 teaching areas or classbases. The objective survey procedure, which was designed specifically for use in open plan classrooms, is described. The acoustic measurements relating to speech intelligibility within a classbase, including ambient noise level, intrusive noise level, speech to noise ratio, speech transmission index, and reverberation time, are presented. The effects on speech intelligibility of critical physical design variables, such as the number of classbases within an open plan unit and the selection of acoustic finishes for control of reverberation, are examined. This analysis enables limitations of open plan classrooms to be discussed and acoustic design guidelines to be developed to ensure good listening conditions. The types of teaching activity to provide adequate acoustic conditions, plus the speech intelligibility requirements of younger children, are also discussed.