Control over Nanostructures and Associated Mesomorphic Properties of Doped Self‐Assembled Triarylamine Liquid Crystals

We have synthesized a series of triarylamine‐cored molecules equipped with an adjacent amide moiety and dendritic peripheral tails in a variety of modes. We show by ¹H NMR and UV/Vis spectroscopy that their supramolecular self‐assembly can be promoted in solution upon light stimulation and radical initiation. In addition, we have probed their molecular arrangements and mesomorphic properties in the bulk by integrated studies on their film state by using differential scanning calorimetry (DSC), variable‐temperature polarizing optical microscopy (VT‐POM), variable‐temperature X‐ray diffraction (VT‐XRD), and atomic force microscopy (AFM). Differences in the number and the disposition of the peripheral tails significantly affect their mesomorphic properties associated with their lamellar‐ or columnar‐packed nanostructures, which are based on segregated stacks of the triphenylamine cores and the lipophilic/lipophobic periphery. Such structural tuning is of interest for implementation of these soft self‐assemblies as electroactive materials from solution to mesophases.     

Synthesis of partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions

Partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions (ps‐PES‐FPES), with ionic exchange capacity (IEC) ranging between 0.9 and 1.5 meq H⁺/g, are synthesized by regioselective bromination of partially fluorinated poly(arylene ether sulfone) multiblock copolymers (PES‐FPES), followed by Ullman coupling reaction with lithium 1,1,2,2‐tetrafluoro‐2‐(1,1,2,2‐tetrafluoro‐2‐iodoethoxy)ethanesulfonate. The PES‐FPES are prepared by aromatic nucleophilic substitution reaction by an original approach, that is, “one pot two reactions synthesis.” The chemical structures of polymers are analyzed by ¹H and ¹⁹F NMR spectroscopy. The resulted ionomers present two distinct glass transitions and α relaxations revealing phase separation between the hydrophilic and the hydrophobic domains. The phase separation is observed at much lower block lengths of ps‐PES‐FPES as compared with the literature. AFM and SANS observations supported the phase separation, the hydrophilic domains are well dispersed but the connectivity to each other depends on the ps‐PES block lengths. The thermomechanical behavior, the water up‐take, and the conductivity of the ps‐PES‐FPES membranes are compared with those of Nafion 117^® and randomly functionalized polysulfone (ps‐PES). Conductivities close or higher to those of Nafion 117^® are obtained. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1941–1956     

Synthesis of cyclic mono- and bis-disulfides and their selective conversion to mono- and bis-thiosulfinates

Twelve-membered ring pseudopeptidic cyclic disulfides have been prepared by iodine oxidation of the parent dithiols. However, oxidation of N,N′-(1,2-phenylene)bis(2-mercapto-2-methylpropanamide) afforded a 25/75 mixture of cyclic mono- and bis-disulfides that were separated by selective precipitation in CHCl₃. The cyclic bis-disulfide was selectively prepared by iodine oxidation of the Ni complex of this dithiol and crystallized. Its crystal structure was solved by X-ray diffraction. All these cyclic mono- or bis-disulfides were selectively converted to cyclic mono- and bis-thiosulfinates upon stoichiometric oxidation with dimethyldioxirane at low temperature. ¹H NMR of the cyclic bis-thiosulfinate revealed the presence of four isomers, two couples of stereoisomers, as expected from the insertion of two oxygen atoms in this compound, one on each disulfide bond. The two couples of cis/trans isomers were separated by preparative TLC and identified after alkaline cleavage of the two S(O)-S bonds and metalation with Ni(II). As HO⁻ attack is selective for the sulfinyl sulfur, the nature of the Ni complexes obtained is a signature of each couple of stereoisomers.     

A six-step synthesis of (S)-5-ethenyl-3-(1-methyl-2-pyrrolidinyl)pyridine (SIB-1508Y) from (S)-nicotine

The anti-Parkinson’s agent SIB-1508Y was prepared in six steps from (S)-nicotine in 20% overall yield. The strategy involves a regioselective formylation at C-5 of a 1,4-dihydronicotine intermediate.     

Synthesis and properties of polyethersulphone–polydimethyisiloxane block copolymers

High molecular weight alternating block copolymers of polyethesulphone (PES) and polydimethylsiloxane (PDMS) were prepared by the condensation of dimethylamino-terminated PDMS oligomers and hydroxy-terminated PES oligomers in 1,2-dichlorobenzene. Microphase separation of the block copolymers at exceptionally short block lengths was observed by differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The Si? O? C intersegment linkage in these materials appeared to display poor hydrolytic stability which is contrary to results obtained for other block copolymers.     

Effect of antigen size on optimal ligand density of immobilized antibodies for a high-performance liquid chromatographic support

The antigen binding capacities for purified polyclonal antibodies immobilized onto a silica-based high-performance liquid chromatographic (HPLC) affinity support are described for three serum proteins over a range of antibody ligand densities. The rate of decline in the specific activity of the immobilized antibodies with respect to increasing ligand density was found to increase with the molecular weights of the antigens. The antibodies used were purified from whole antiserum using high-performance affinity chromatography and were examined using HPLC on an SCX stationary phase. Conditions are also described for efficient coupling of the ligand to the support.     

Effects of osmotic manipulation of intracellular hydration of HeLa S-3 cells on their proton NMR relaxation times

Pellets of HeLa from suspension cultured cells in isotonic medium (300 mosmolar) were introduced into a Bruker CXP100 NMR spectrophotometer at 80 mHz within 5 min of the start of centrifugation. T1 and T2 times were measured within a total elapsed time of 20-25 min at 80 mHz and 37 degrees C, and averaged 1430 msec and 120 msec, respectively. Extrapolation to zero extracellular space gave a corrected T1 of 1370 msec. For cells collected after 10 min in hypotonic medium (down to 30 mosmolar) increased proton density correlated well with increased cell water content, but relaxation times did not rise in proportion to that predicted for the entry of "bulk" water (T1 of 4700 msec), except when swelling approached lysis point. Cells partially dehydrated by 10 min in hypertonic medium of up to 1500 mosmolar have also been analyzed, but once again the shortening of T1 was not proportional to the loss of "free" (bulk phase) water. At the upper limit of hypertonic treatment, lacunae or vacuoles of a watery nature separated within the cytomatrix, preventing maximum dehydration. The relationship of cell water to T1 is complex over the whole range of tonicity that HeLa S-3 cells tolerate. The data indicate, however, that hypotonically induced water probably has an average T1 time considerably lower than bulk phase water. In contrast, raising the total extracellular volume with medium had precisely the predicted effect on T1 time, further strengthening the case that water taken up by cell acquires a shorter T1 time. Cells adapting to hypotonic conditions oscillated in size and water content over 2-3 hr before returning to near their initial volume. Under these circumstances, T1 oscillated in the same way but with a reduced amplitude, consistent with the above findings.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

The structural characteristics of organozinc complexes incorporating N,N'-bidentate ligands

Dimethylzinc reacts with an excess of N-2-pyridylaniline 6 to give the homoleptic species, Zn[PhN(2-C(5)H(4)N)](2) 8. Single crystal X-ray diffraction reveals a solid-state dimer based on an 8-membered (NCNZn)(2) core motif. Zn[CyN(2-C(5)H(4)N)]Me (Cy =c-C(6)H(11)) 10, prepared by the combination of ZnMe(2) with the corresponding cyclohexyl-substituted pyridylamine, is also dimeric in the solid state but reveals a central (ZnN)(2) metallacycle. Employment of (p-Tol)NH(2-C(5)H(4)N)(p-Tol = 4-MeC(6)H(4)) 11 yielded the tris(zinc) adduct Zn(3)[(p-Tol)N(2-C(5)H(4)N)](4)Me(2) 12, which incorporates a central chiral molecule of 'Zn[(p-Tol)N(2-C(5)H(4)N)](2)' 12a, that bridges two 'Zn[(p-Tol)N(2-C(5)H(4)N)]Me' 12b units. A similar trimetallic structure is noted when the pyridylaniline substrate 11 is replaced with the bicyclic guanidine 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine (hppH), affording Zn(3)(hpp)(4)Me(2) 13. Spectroscopic studies point to retention of the solid-state structure of in hydrocarbon solution. Reaction of 13 with dimesityl borinic acid, Mes(2)BOH (Mes = mesityl), affords Zn(3)(hpp)(4)(OBMes(2))(2) 14 in which the trimetallic core is retained. This reactivity is in contrast to the closely related reaction of dimeric Zn[Me(2)NC[N(i)Pr](2)]Me 15 with Mes(2)BOH, which yielded Zn[Me(2)NC[N(i)Pr](2)][OBMes(2)].Me(2)NC[N(i)Pr][NH(i)Pr] 16 as a result of protonation at the guanidine ligand in addition to the Zn-Me bond.