Control over Nanostructures and Associated Mesomorphic Properties of Doped Self‐Assembled Triarylamine Liquid Crystals

We have synthesized a series of triarylamine‐cored molecules equipped with an adjacent amide moiety and dendritic peripheral tails in a variety of modes. We show by ¹H NMR and UV/Vis spectroscopy that their supramolecular self‐assembly can be promoted in solution upon light stimulation and radical initiation. In addition, we have probed their molecular arrangements and mesomorphic properties in the bulk by integrated studies on their film state by using differential scanning calorimetry (DSC), variable‐temperature polarizing optical microscopy (VT‐POM), variable‐temperature X‐ray diffraction (VT‐XRD), and atomic force microscopy (AFM). Differences in the number and the disposition of the peripheral tails significantly affect their mesomorphic properties associated with their lamellar‐ or columnar‐packed nanostructures, which are based on segregated stacks of the triphenylamine cores and the lipophilic/lipophobic periphery. Such structural tuning is of interest for implementation of these soft self‐assemblies as electroactive materials from solution to mesophases.     

Synthesis of partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions

Partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions (ps‐PES‐FPES), with ionic exchange capacity (IEC) ranging between 0.9 and 1.5 meq H⁺/g, are synthesized by regioselective bromination of partially fluorinated poly(arylene ether sulfone) multiblock copolymers (PES‐FPES), followed by Ullman coupling reaction with lithium 1,1,2,2‐tetrafluoro‐2‐(1,1,2,2‐tetrafluoro‐2‐iodoethoxy)ethanesulfonate. The PES‐FPES are prepared by aromatic nucleophilic substitution reaction by an original approach, that is, “one pot two reactions synthesis.” The chemical structures of polymers are analyzed by ¹H and ¹⁹F NMR spectroscopy. The resulted ionomers present two distinct glass transitions and α relaxations revealing phase separation between the hydrophilic and the hydrophobic domains. The phase separation is observed at much lower block lengths of ps‐PES‐FPES as compared with the literature. AFM and SANS observations supported the phase separation, the hydrophilic domains are well dispersed but the connectivity to each other depends on the ps‐PES block lengths. The thermomechanical behavior, the water up‐take, and the conductivity of the ps‐PES‐FPES membranes are compared with those of Nafion 117^® and randomly functionalized polysulfone (ps‐PES). Conductivities close or higher to those of Nafion 117^® are obtained. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1941–1956     

Synthesis of cyclic mono- and bis-disulfides and their selective conversion to mono- and bis-thiosulfinates

Twelve-membered ring pseudopeptidic cyclic disulfides have been prepared by iodine oxidation of the parent dithiols. However, oxidation of N,N′-(1,2-phenylene)bis(2-mercapto-2-methylpropanamide) afforded a 25/75 mixture of cyclic mono- and bis-disulfides that were separated by selective precipitation in CHCl₃. The cyclic bis-disulfide was selectively prepared by iodine oxidation of the Ni complex of this dithiol and crystallized. Its crystal structure was solved by X-ray diffraction. All these cyclic mono- or bis-disulfides were selectively converted to cyclic mono- and bis-thiosulfinates upon stoichiometric oxidation with dimethyldioxirane at low temperature. ¹H NMR of the cyclic bis-thiosulfinate revealed the presence of four isomers, two couples of stereoisomers, as expected from the insertion of two oxygen atoms in this compound, one on each disulfide bond. The two couples of cis/trans isomers were separated by preparative TLC and identified after alkaline cleavage of the two S(O)-S bonds and metalation with Ni(II). As HO⁻ attack is selective for the sulfinyl sulfur, the nature of the Ni complexes obtained is a signature of each couple of stereoisomers.     

A six-step synthesis of (S)-5-ethenyl-3-(1-methyl-2-pyrrolidinyl)pyridine (SIB-1508Y) from (S)-nicotine

The anti-Parkinson’s agent SIB-1508Y was prepared in six steps from (S)-nicotine in 20% overall yield. The strategy involves a regioselective formylation at C-5 of a 1,4-dihydronicotine intermediate.     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

Polarizing a hydrophobic cavity for the efficient binding of organic guests: the case of calix[6]tren, a highly efficient and versatile receptor for neutral or cationic species

The host-guest properties of calix[6]tren 1 have been evaluated. The receptor is based on a calix[6]arene that is covalently capped at the narrow rim by a tren unit. As a result, the system presents a concave hydrophobic cavity with, at its bottom, a grid-like nitrogenous core. Despite its well-defined cavity and opening to the outside at the large rim, 1 did not behave as a good receptor for neutral molecules in chloroform. However, it exhibited efficient endo-complexation of ammonium guests. By contrast, the per-protonated host, 1.4H(+), behaved as a remarkable receptor for small organic molecules. The complexation is driven by a strong charge-dipole interaction and hydrogen bonds between the polar guest and the tetracationic cap of the calixarene. Finally, coordination of Zn(2+) to the tren core led to the asymmetrization of calixarene cavity and to the strong but selective endo-binding of neutral ligands. This study emphasizes the efficiency of a receptor presenting a concave hydrophobic cavity that is polarized at its bottom. The resulting combination of charge-dipole, hydrogen bonding, CH-pi, and van der Waals interactions highly stabilizes the supramolecular architectures. Also, importantly, the tren cap allows the tuning of the polarization, offering either a basic (1), a highly charged and acidic (1.4H(+)), or a coordination (1.Zn(2+)) site. As a result, the system proved to be highly versatile, tunable, and interconvertible in solution by simple addition of protons, bases, or metal ions.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

NO-Mediated aromatic nitration during decomposition of phenolic S-nitrosothiols in non-aqueous aerobic medium

Five novel S-nitrosothiol compounds (6-10) derived from L-cysteine were generated in solution and their decomposition rate was followed by UV spectroscopy. In acetonitrile, compounds 9 and 10 were the most stable of this series with a half-life of 24 h. The final organic decomposition products of the five S-nitrosothiols were also analysed. Derivatives 8, 9, and 10, possessing a phenolic hydroxyl group, afforded an unexpected decomposition pathway, with nitration of aromatic ring occurring in non-aqueous media. A mechanism involving a phenoxy radical seems to be implicated.     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.