Nanostructured Polyelectrolyte-based System as a Toolbox for Metal Ions Detection

The capability of certain heavy metal ions to induce fluorescence decrease by a quenching mechanism suggested us to design and build a sensor potentially tunable for different ions at different concentrations. We propose a quenching-based sensor exploiting a nanostructured architecture in which fluorescent molecules (the sensing probe) are entrapped to recognize a specific analyte (heavy metal ions) through an optical transduction. The polyelectrolyte nanostructured system, named nanocapsule, improves the fluorophore-ion quenching sensitivity allowing a micromolar detection. Furthermore we couple our sensor with an electrical device in order to refine the sensing procedure: the electric field created allows a metal ions spatial gradient, necessary to detect a specific element on a single sample solution, avoiding a comparative analysis with an intensity reference value. Results obtained will show the advantages and the potentialities of our system as a smart toolbox for metal ions detection.     

Experimental implementation of a self-tuning control system for decentralised velocity feedback

Simulations have previously shown that, for broadband excitation, adjusting the gain of a local velocity feedback loop to maximise their absorbed power also tends to minimise the kinetic energy of the structure under control. This paper describes an experimental implementation of multiple velocity feedback loops on a flat panel, whose gains can be controlled automatically by an algorithm that maximises their local absorbed power. Taking care to remove excessive phase shift in the control loop allows a stable feedback gain that is high enough to experimentally demonstrate the transition in control action between optimum damping and pinning of the structure. A simple search algorithm is then used to adapt the feedback gains of two control loops to maximise their local absorbed powers, thus demonstrating self-tuning. By measuring the power absorbed by each of these loops and also estimation of the kinetic energy of the plate from velocity measurements for a wide range of the two feedback gains, it is shown that not only does the adaptive algorithm converge to a set of feedback gains that maximise total power absorbed by the two feedback loops, but also that this set of feedback gains is very close to those that minimise the measured kinetic energy of the panel.     

A version of Stöber synthesis enabling the facile prediction of silica nanospheres size for the fabrication of opal photonic crystals

A sol-gel synthesis procedure based on the method proposed by Stöber et al. (J Colloid Interface Sci 26:302–315, 1968) has been adopted for the one-step preparation of mono-dispersed silica nanospheres. An excellent control of the particle diameter over a wide range is obtained by varying the amount of silicon alkoxide only, while the concentration of all other components is kept fixed: this allows the fabrication of artificial opals with a finely tuned and precisely predictable lattice parameter.     

An independent component analysis-based approach on ballistocardiogram artifact removing

Interest about simultaneous electroencephalography (EEG) and functional magnetic resonance imaging (fMRI) data acquisition has rapidly increased during the last years because of the possibility that the combined method offers to join temporal and spatial resolution, providing in this way a powerful tool to investigate spontaneous and evoked brain activities. However, several intrinsic features of MRI scanning become sources of artifacts on EEG data. Noise sources of a highly predictable nature such as those related to the pulse MRI sequence and those determined by magnetic gradient switching during scanning do not represent a major problem and can be easily removed. On the contrary, the ballistocardiogram (BCG) artifact, a large signal visible on all EEG traces and related to cardiac activity inside the magnetic field, is determined by sources that are not fully stereotyped and causing important limitations in the use of artifact-removing strategies. Recently, it has been proposed to use independent component analysis (ICA) to remove BCG artifact from EEG signals. ICA is a statistical algorithm that allows blind separation of statistically independent sources when the only available information is represented by their linear combination. An important drawback with most ICA algorithms is that they exhibit a stochastic behavior: each run yields slightly different results such that the reliability of the estimated sources is difficult to assess. In this preliminary report, we present a method based on running the FastICA algorithm many times with slightly different initial conditions. Clustering structure in the signal space of the obtained components provides us with a new way to assess the reliability of the estimated sources.     

Spectroscopies and Electron Microscopies Unravel the Origin of the First Colour Photographs

The first colour photographs were created by a process introduced by Edmond Becquerel in 1848. The nature of these photochromatic images colours motivated a debate between scientists during the XIX^th century, which is still not settled. We present the results of chemical analysis (EDX, HAXPES and EXAFS) and morphology studies (SEM, STEM) aiming at explaining the optical properties of the photochromatic images (UV-visible spectroscopy and low loss EELS). We rule out the two hypotheses (pigment and interferences) that have prevailed since 1848, respectively based on variations in the oxidation degree of the compound forming the sensitized layer and periodically spaced photolytic silver planes. A study of the silver nanoparticles dispersions contained in the coloured layers showed specific localizations and sizes distributions of the nanoparticles for each colour. These results allow us to formulate a plasmonic hypothesis on the origin of the photochromatic images colours.     

NITROUS ACID REACTIVATION OF ULTRAVIOLET-IRRADIATED DENATURED TRANSFORMING DNA

Abstract— Partial recovery of ultraviolet-damaged denatured transforming DNA from Haemophilus influenzae , was obtained by exposing irradiated denatured DNA to nitrous acid and assaying transforming activity. This reactivation was affected by the time of incubation with nitrous acid.     

Quasielastic and inelastic neutron scattering on hydrated calcium silicate pastes

Using the inverse geometry spectrometer QENS at the Intense Pulsed Neutron Source of the Argonne National Laboratory, we collected quasielastic and inelastic neutron scattering spectra of hydrated tricalcium and dicalcium silicate, the main components of ordinary Portland cement. Data were obtained at different curing time, from a few hours to several months. Both the quasielastic and inelastic spectra have been analyzed at the same time according to the relaxing cage model, which is a model developed to describe the dynamics of water at supercooled temperatures. Short-time and long-time dynamics of hydration water in hydrated cement pastes as a function of the curing time have been simultaneously obtained. The results confirm the findings reported in previous experiments showing that it is possible to fit consistently the quasielastic and inelastic spectra giving insights on the effect of the curing time on the short-time vibrational dynamics of hydration water.     

Synthesis of linear and tripoidal oligo(phenylene ethynylene)-based building blocks for application in modular DNA-programmed assembly

Rigid linear and tripoidal organic modules based on the oligo(phenylene ethynylene) backbone having salicylaldehyde-derived termini are synthesized. A highly functionalized 5-iodosalicyl aldehyde was prepared and coupled to each ethynyl group of 1,4-diethynylbenzene or 1,3,5-triethynylbenzene in Sonogashira couplings. The two or three termini of the compounds are functionalized for incorporation in linear and branched oligonucleotide strands. For the linear module (LM), the two termini are equipped with amide spacers, and one of these was functionalized with a DMTr (dimethoxytrityl)-protected hydroxy group and the other with a phosphoramidite. One of the tripoidal modules is prepared with DMTr groups in two of its three termini. A tripoidal module is also synthesized with three different groups on its hydroxy termini: a phosphoramidite, a DMTr group, and an Fmoc group. Extended studies have shown that these rigid linear and tripoidal organic modules can be incorporated into short oligonucleotides. Several of these modules can be applied for DNA-directed assembly and covalent coupling into structures of predetermined connectivity. Such structures have potential application for molecular electronics and nanotechnology.     

Particle‐in‐a‐Frame Nanostructures with Interior Nanogaps

Designing plasmonic hollow colloids with small interior nanogaps would allow structural properties to be exploited that are normally linked to an ensemble of particles but within a single nanoparticle. Now, a synthetic approach for constructing a new class of frame nanostructures is presented. Fine control over the galvanic replacement reaction of Ag nanoprisms with Au precursors gave unprecedented Au particle‐in‐a‐frame nanostructures with well‐defined sub‐2 nm interior nanogaps. The prepared nanostructures exhibited superior performance in applications, such as plasmonic sensing and surface‐enhanced Raman scattering, over their solid nanostructure and nanoframe counterparts. This highlights the benefit of their interior hot spots, which can highly promote and maximize the electric field confinement within a single nanostructure.     

Physicochemical characterization of acrylamide/bisacrylamide hydrogels and their application for the conservation of easel paintings

Acrylamide chemical gels have been synthesized to obtain systems with mechanic and hydrophilic properties suitable for the cleaning of works of art. The gel characteristics were tailored by changing the polymer percentage present in the final hydrogel formulation from 2 to 10% w/w. Two different hydrogels have been selected in this interval for an in depth characterization (i.e., S 4% w/w and H 6% w/w). Water retention properties of the gels along with the free water index have been determined by the combination of standard dehydration tests and differential scanning calorimetry (DSC) measurements. The gels' structure has been determined by scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS). The water retention capacity of hydrogel, H, was also determined. Cleaning tests on easel painting replicas, performed with both hydrogels loaded with an aqueous detergent system, showed good results in the removal of a widely used synthetic adhesive and hence offered these gels as a real alternative to the widely applied physical gel methodology with the advantage of being a residue-free technique. A preliminary SAXS investigation confirms the persistence of the detergent system nanostructure inside the hydrogel.