Intrachain energy migration to weak charge-transfer state in polyfluorene end-capped with naphthalimide derivative

Polyfluorene end-capped with N-(2-benzothiazole)-1,8-naphthalimide (PF-BNI) is a highly fluorescent material with fluorescence emission modulated by solvent polarity. Its low energy excited state is assigned as a mixed configuration state between the singlet S(1) of the fluorene backbone (F) with the charge transfer (CT) of the end group BNI. The triexponential fluorescence decays of PF-BNI were associated with fast energy migration to form an intrachain charge-transfer (ICCT) state, polyfluorene backbone decay, and ICCT deactivation. Time-resolved fluorescence anisotropy exhibited biexponential relaxation with a fast component of 12-16 ps in addition to a slow one in the range 0.8-1.4 ns depending on the solvent, showing that depolarization occurs from two different processes: energy migration to form the ICCT state and slow rotational diffusion motion of end segments at a longer time. Results from femtosecond transient absorption measurements agreed with anisotropy decay and showed a decay component of about 16 ps at 605 nm in PF-BNI ascribed to the conversion of S(1) to the ICCT excited state. From the ratio of asymptotic and initial amplitudes of the transient absorption measurement, the efficiency of intrachain ICCT formation is estimated in 0.5, which means that, on average, half of the excited state formed in a BNI-(F)(n)-BNI chain with n = 32 is converted to its low energy intrachain charge-transfer (ICCT) state.     

Absolute configuration of a rare dibenzoylmethane derivative from Dahlstedtia glaziovii (Fabaceae)

Dibenzoylmethanes (DBMs) belong to a small group of flavonoids, known as β-hydroxychalcones, rarely found in nature. Despite their biological and chemotaxonomic importance, the absolute configuration of C-8 substituted DBMs has never been reported. Herein, the absolute stereochemistry of 2′-methoxy-8-(α-α-dimethylallyl)-[3′,4′:4″,5″]-furan-dibenzoylmethane is determined using the VCD exciton chirality method, which may be safely applied to other members of this class.     

Using circularly polarized luminescence to probe exciton coherence in disordered helical aggregates

Circularly polarized emission from helical MOPV4 aggregates is studied theoretically based on a Hamiltonian including excitonic coupling, exciton phonon coupling, and site disorder. The latter is modeled via a Gaussian distribution of site energies. The frequency dependence of the circularly polarized luminescence dissymmetry g(lum)(omega) contains structural information about the low-energy-neutral (excitonic) polaron from which emission originates. Near the 0-0 emission frequency, g(lum)(omega) provides a measure of the exciton coherence length, while at lower energies, in the vicinity of the sideband frequencies, g(lum)(omega) probes the polaron radius. The present work focuses on how the 0-0 dissymmetry, g(lum)(0-0), relates to the emitting exciton's coherence function, from which the coherence length is deduced. In the strong disorder limit where the exciton is localized on a single chromophore, g(lum)(0-0) is zero. As disorder is reduced and the coherence function expands, /g(lum)(0-0)/ increases more rapidly than the sideband dissymmetries, resulting in a pronounced surge in g(lum)(omega) near the 0-0 transition frequency. The resulting spectral shape of g(lum)(omega) is in excellent agreement with recent experiments on MOPV4 aggregates. In the limit of very weak disorder, corresponding to the motional narrowing regime, the coherence function extends over the entire helix. In this region, g(lum)(0-0) undergoes a surprising sign reversal but only for helices which are between n+12 and n+1 complete turns (n = 0,1,...). This unusual sign change is due to the dependence of the rotational line strength on long-range exciton coherences which are also responsible for a heightened sensitivity of g(lum)(omega) to long-range excitonic coupling.     

Co-Treatment of Purified Annatto Oil (Bixa orellana L.) and Its Granules (Chronic®) Improves the Blood Lipid Profile and Bone Protective Effects of Testosterone in the Orchiectomy-Induced Osteoporosis in Wistar Rats

This study aimed to evaluate and compare the effects of co-treatment with purified annatto oil (PAO) or its granules (GRA, Chronic^®) with that of testosterone on the orchiectomy-induced osteoporosis in Wistar rats. After surgery, rats were treated from day 7 until day 45 with testosterone only (TES, 7 mg/kg, IM) or TES + PAO or GRA (200 mg/kg, p.o.). The following parameters were evaluated: food/water intake, weight, HDL, LDL, glucose, triglycerides (TG), total cholesterol (TC), alkaline phosphatase levels, blood phosphorus and calcium contents, femur weight, structure (through scanning electron microscopy), and calcium content (through atomic absorption spectrophotometry). Our results show that orchiectomy could significantly change the blood lipid profile and decrease bone integrity parameters. Testosterone reposition alone could improve some endpoints, including LDL, TC, bone weight, and bone calcium concentration. However, other parameters were not significantly improved. Co-treatment with PAO or GRA improved the blood lipid profile and bone integrity more significantly and improved some endpoints not affected by testosterone reposition alone (such as TG levels and trabeculae sizes). The results suggest that co-treatment with annatto products improved the blood lipid profile and the anti-osteoporosis effects of testosterone. Overall, GRA had better results than PAO.     

Physical–chemical characterization of new anti-inflammatory agent (LPSF/GQ-130) and evaluation of its thermal compatibility with pharmaceutical excipients

LPSF/GQ-130 is a drug candidate, according to reports about its significant anti-inflammatory activity and non-toxicity demonstrated in an acute preclinical study. Despite this, knowledge of its physical–chemical properties is insufficient for the development of medicines. Thus, this work aimed to characterize the raw material at its molecular, particle, and agglomerate level as well as evaluate its thermal compatibility to pharmaceutical excipients. Through spectrometric techniques the molecular structure of the substance was confirmed. For thermal analysis its melting (171.3–176.5 °C) and degradation (238.3–297.4 °C) ranges, besides its purity (99.37 %), were determined. The kinetic non-isothermal degradation supplied the order of thermal reaction (0), the activation energy (96.14 kJ mol^?1) and the frequency factor (3.130 × 10^?7 min^?1). The diffraction of X-rays presented well defined signs in the angles 5.5°, 16.3°, and 44.18° 2θ, suggesting crystalline structure. Scanning electronic microscopy exhibited needle morphology. LPSF/GQ-130 presented Type-III isotherm adsorption/desorption, with a superficial area of 81.3529 m² g^?1 and water content calculated at 1 % using the Karl Fisher method. Laser granulometry calculated its granulometry between 11.65 and 13.10 μm, thus it was characterized as a very fine powder. The prototype was classified as insoluble in water (<0.0187 μg mL^?1) and soluble in acetone and acetonitrile, and exhibits instability in basic pH (100 %) and oxidative conditions (30–70 %). In thermal compatibility the excipients PVP K-30, Compritol^® 888 ATO, and MYRJ^® 59 seem to exercise a protective thermal activity for the prototype.     

Thermal characterization of antimicrobial drug ornidazole and its compatibility in a solid pharmaceutical product

The ornidazole drug substance presents melt at approximately 90 °C (∆T = 85–98 °C), which is critical for its use on pharmaceutical manufacturing process. This work aimed the thermal characterization of ornidazole raw-material synthesized by three different manufacturers from India, China, and Italy, using the thermoanalytical techniques of DTA, DSC, and TG, besides the verification of its stability and compatibility as a solid pharmaceutical product by the analysis of its binary mixtures (BM) with excipients and a tablet formulation. The characterization includes the thermal decomposition kinetic investigation by Ozawa model using Arrhenius equation and drug purity determination by Van’t Hoff equation. The DSC purity determination and precision were compared with results from UV–Vis spectrophotometric and liquid chromatography, showing an adequate correlation before being recommended as a general method for purity assay. The drug raw-materials presented similar quality and zero-order kinetic behavior, besides showing differences on thermal stability. The drug presented compatibility with the tested excipients since the BM studied presented melting at the same temperature range as the drug and a decomposition temperature similar to the drug for two of the BM, and at a higher temperature for the others three of the BM evaluated, which presented excipients with higher molecular structure, capable of spatial coating on the small drug molecule promoting a physical interaction pharmaceutical acceptable. The tablet was processed by wet granulation and compressed under normal conditions of pressure and temperature, maintaining the physical properties of solid drug approving the manufacturing process used. In this study, the thermal analysis was used with success as an alternative method to characterize, quantify, and perform a preformulation study.     

Synthesis and photophysical properties of a novel soluble polyquinoline

Synthesis, characterization and photophysical properties of the poly{[(2,2′-bis-(4-phenylquinoline)-1,4-phenylene]-alt-phenoxy}_n, a novel quinoline derived copolymer with ether linkages, are described. Polymerization reaction occurred through nucleophilic aromatic substitution between an aromatic halogen and a phenol. Structural characterization was made by FTIR, NMR, DSC, TGA and GPC. Ultraviolet, fluorescence and excitation spectroscopy were used for analysis of photophysical properties. The ether linkages, apart from providing better solubility compared to full conjugated quinoline copolymers, made it possible to access the photophysical properties of the quinoline moiety as a constituent of a polymer backbone, since these linkages are responsible for the confinement of the chromophoric unit. The role played by protonation in photophysical behavior was also considered, since this class of polymers is only soluble in strong acid media. This work comprised the study of the photophysical properties of nitrogen containing polymers with confined conjugation and the role of this element in some interesting properties.     

Characterization of specific interactions capacity of solid surfaces by adsorption of alkanes and alkenes. Part II: Adsorption on crystalline silica layer surfaces

Summary Adsorption of branched octanes and linear hydrocarbons on crystalline lamellar silica surfaces has been studied by inverse gas chromatography at infinite dilution. Taking the adsorption of the n-alkanes as a reference, the influence of the double bond on the hydrocarbon adsorption phenomena has been demonstrated. Thermodynamical parameters have been calculated which permit conclusions to be made on the adsorption mechanisms of lamellar materials.     

Excited-state dynamics of polyfluorene derivatives in solution

The excited-state dynamics of two polyfluorene copolymers, one fully conjugated containing phenylene vinylene units alternated with 9,9'-dihexylfluorenyl groups and the other segmented by -(CH2)8- spacer, were studied in dilute solution of different solvents using a picosecond single-photon timing technique. The excited-state dynamics of the segmented copolymer follows the F?rster resonant energy-transfer model which describes intrachain energy-transfer kinetics among random oriented chromophores. Energy transfer is confirmed by analysis of fluorescence anisotropy relaxation with the measurement of a short decay component of about 60 ps. The fluorescence decay surface of the fully conjugated copolymer is biexponential with decay times of about 470 and 900 ps, ascribed to deactivation of chain moieties containing trans and cis isomers already in a photostationary condition. Thus, energy transfer is very fast due to the conjugated nature and rigid-rod-like structure of this copolymer chain.