Transport properties of a side-chain liquid-crystalline polymer. Poly(4-acryloyloxy biphenyl)

The transport properties of a side-chain liquid-crystalline polymer forming a smectic A phase have been investigated using dichloromethane as a permeant. Samples differing in the isotropization enthaoly were analyzed. A. Correlation between this thermal parameter and sorption has been found, while the diffusion coefficient is substantially the same in all samples. The results obtained can be explained in terms of a biphasis model in which a disordered permeable phase is present within the liquid-crystalline phase, which is impermeable to the diffusant molecules.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

An accurate method to predict the stress concentration in composite laminates with a circular hole under tensile loading

The paper presents a theoretical-numerical hybrid method for determining the stresses distribution in composite laminates containing a circular hole and subjected to uniaxial tensile loading. The method is based upon an appropriate corrective function allowing a simple and rapid evaluation of stress distributions in a generic plate of finite width with a hole based on the theoretical stresses distribution in an infinite plate with the same hole geometry and material. In order to verify the accuracy of the method proposed, various numerical and experimental tests have been performed by considering different laminate lay-ups; in particular, the experimental results have shown that a combined use of the method proposed and the well-know point-stress criterion leads to reliable strength predictions for GFRP or CFRP laminates with a circular hole. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 4, pp. 531–570, July–August, 2007.     

1-Arylsulfonylamino-1,2,3-triazole derivatives from functionalyzed 1,2-cyclohexanediones

The heterocyclization reaction of arylsulfonylhydrazones from alkyl substituted 1,2-cyclohexanediones is sensitive to the steric requirements of the alkyl groups. A mechanism for the cyclization in acidic medium is also reported.     

Rheological behavior and structural interpretation of waxy crude oil gels

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

Intermolecular stacking of a tetranuclear cyclic Pt(II) complex: NMR characterization and X-ray crystal structure of cis-trans-cis-trans tetra[μ-2,6-diethynyl-4-nitroaniline-bis(tri(p-tolyl)phosphine)platinum(II)]

The synthesis and characterization of a tetranuclear Pt complex, cis-trans-cis-trans tetra[μ-2,6-diethynyl-4-nitroaniline-bis(tri(p-tolyl)phosphine) platinum(II)], namely [L₂Pt-DENA]₄ with L = tri-p-tolylphosphine, is reported. The complex was obtained by the dehydrohalogenative condensation of 2,6-diethynyl-4-nitroaniline (DENA) with cis-[dichlorobis(tri(p-tolyl)phosphine)platinum(II)]. The single crystal structure determination of [L₂Pt-DENA]₄ indicated the formation of a neutral molecular cycle with four alternating platinum units in cis and trans configurations, all bridged with DENA spacers with the presence of solvent (toluene) crystallization molecules. A twisted tetranuclear cyclic feature was identified. The formation of intermolecular stacks of the tetranuclear complex in solution was assessed by means of nuclear Overhauser enhancement spectroscopy (NOESY) and rotating frame Overhauser effect spectroscopy (ROESY) characterizations.     

Characterisation of fresh and aged terpenic resins by micro-FTIR and GC-MS analyses of varnishes in XVI-XVII centuries paintings

Resinous materials, generally added to drying oils, were often employed as final protective films in paintings, both in tempera and oil techniques. Most of the resins used in fine arts come from exudates of plants. Natural resins are mainly composed by terpenoids. Among these resins, dammar, rosin, mastic, elemi gum, Venice turpentine were frequently employed in easel paintings. The aim of this work is the identification of natural resins in samples collected from works of art. In this paper we propose to use micro-FTIR spectrometry as a preliminary and non destructive technique to detect the presence of resinous materials in microsamples collected from paintings, followed by GC-MS analyses to obtain a precise identification of the resin. To reach this aim commercial resins, employed as standard, were analysed previously by micro-FTIR spectrometry and then analysed by GC-MS chromatography, searching characteristic chemical compounds used as "markers" of resins. The results obtained on standards allowed us to successfully analyse samples collected from two works of art: the "Portrait of a Young Gentleman", by Lorenzo Lotto (XVI century), and the "Madonna with the Infant Jesus and Saints": by Carlo Maratta (XVII secolo).     

Transition state localization by a density functional method. Applications to isomerization and symmetry-forbidden reactions

Summary A new transition state algorithm incorporated into the density functional code deMon, has been used to study thetrans cis-hydroxymethylene andtrans-hydroxymethylene formaldehyde isomerization processes and to localize the transition state for the decomposition of 1,3-diazacyclobutane to methyleneimine. Calculations have been performed using both local (LSD) and nonlocal spin density (NLSD) gradient-corrected approximations. Two different basis sets of small and large size have been used for the study in order to analyze the effect of the basis set dimension other than that of the nonlocal corrections on the activation energy barrier value. The results seem to confirm that density functional methods can be considered practical and reliable tools for the localization of transition states.