One-Pot Synthesis of Phenytoin Analogs

A series of phenytoin analogs (5,5-diphenylimidazolidine-2,4-dione or 5,5-diphenyl-hydantoin) were synthesized in 65–75% yield from the corresponding substituted benzils. The same products were also obtained directly from -hydroxy ketones via one-pot procedure.     

Loudness growth observed under partially tripolar stimulation: model and data from cochlear implant listeners

Most cochlear implant strategies utilize monopolar stimulation, likely inducing relatively broad activation of the auditory neurons. The spread of activity may be narrowed with a tripolar stimulation scheme, wherein compensating current of opposite polarity is simultaneously delivered to two adjacent electrodes. In this study, a model and cochlear implant subjects were used to examine loudness growth for varying amounts of tripolar compensation, parameterized by a coefficient sigma, ranging from 0 (monopolar) to 1 (full tripolar). In both the model and the subjects, current required for threshold activation could be approximated by I(sigma)=Ithr(0)(1-sigmaK), with fitted constants Ithr(0) and K. Three of the subjects had a "positioner," intended to place their electrode arrays closer to their neural tissue. The values of K were smaller for the positioner users and for a "close" electrode-to-tissue distance in the model. Above threshold, equal-loudness contours for some subjects deviated significantly from a linear scale-up of the threshold approximations. The patterns of deviation were similar to those observed in the model for conditions in which most of the neurons near the center electrode were excited.     

A coated wire-type lead(II) ion-selective electrode based on a phosphorylated calix[4]arene derivative.

The preparation of a lead-selective electrode based on 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis-(diphenylphosphinoylmethoxy)calix[4]arene (1) as an ionophore is reported. The plasticized PVC membrane containing 30% PVC, 57% ortho-nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 9% ionophore 1 was directly coated on a graphite electrode. It exhibits a nearly Nernstian slope of 28.0 +/- 0.2 mV decade(-1) over a concentration range of 1 x 10(-5) - 1 x 10(-2) mol dm(-3) with a detection limit of 1.4 x 10(-6) mol dm(-3). The response time of the electrode was found to be ca. 17 s. The potential of the sensor was independent of the pH variation in the range 3.5 - 5.0. The selectivity of the electrode performance towards lead ions over Th4+, La3+, Sm3+, Dy3+, Y3+, Ca2+, Sr2+, Cd2+, Mn2+, Zn2+, Ni2+, Co2+, NH4+ Ag+, Li+, Na+ and K+ ions was investigated. The prepared electrode was used successfully as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for Pb2+ measurements in various synthetic water samples spiked with lead nitrate was also checked.     

Superparamagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles Decorated Multiwalled Carbon Nanotubes: Preparation via Cyclic Microwave Approach and Their Drug Release Behavior

Superparamagnetic Fe₃O₄ nanoparticles decorated multiwalled carbon nanotubes were synthesized by cyclic microwave method and the effect of different reaction parameters on the products were also investigated. The as synthesized products were characterized by XRD, TEM, SEM, EDS, FT-IR, VSM, and Uv–Vis spectroscopy. It was observed that precursors’ concentration ratio had great effect on the particle size and decorating quality. Also the effect of the other parameters including irradiation power and time on product size and uniformity of the product were also investigated. The best products with desired particle size distribution obtained when irradiation power and reaction time were 900 W and 6 min, respectively. Aspirin and acetaminophen were applied as a model drug and the drug release behavior of the composite was investigated. It was observed that the drug discharge was highly dependent to the pH and can be tuned by applying magnetic field.     

Regiocontrolled synthesis of the trimeric quinone framework of conocurvone

[reaction: see text] The trimeric quinone framework of conocurvone is crucial for its potent anti-HIV activity. A new synthesis of trimeric quinones based on stepwise substitution of the halogens in 2,3-dihaloquinones by hydroxyquinone anions is described. Chlorinated biquinones are key intermediates that undergo regiospecific substitution reactions to yield trimeric quinone monomethyl ethers.     

Electrophoretic analysis of phospho and non-phospho protein mixtures extracted from zebrafish whole brain samples by immobilized metal affinity electrophoresis

Phosphoproteins are principle cellular protein components with diverse regulatory functions and phosphorylation is the most frequent post-translational modifications of proteins. Immobilized metal affinity electrophoresis (IMAEP) is a recently developed technique by which the phosphoprotein components of the cellular samples could be captured. We have made use of this new methodology to capture the whole phosphoproteins of zebrafish brain. Since the elution and resolution of captured phosphoproteins by this new methodology are not yet quite developed, we have tried to make this new methodology more efficient in (1) capturing phosphoproteins from biological samples and (2) elution and resolution of captured phosphoproteins. In this project, we first examined the captured phosphoproteins from zebrafish whole brain samples, as a mixture of phosphoproteins and non-phosphoproteins, examined and resolved the captured phosphoproteins by electrophoresis, and finally eluted them successfully from the gel. In this work, we provided an efficient methodology for the elution of captured phosphoproteins from the gel which is an important development in IMAEP in the analysis of phosphoprotein component of cellular samples and showed the possibility of elution of the captured phosphoproteins. The developed methodology will potentially have wide applications in profiling phosphoproteins from biological samples like zebrafish brain and also in studies about signal transduction systems.     

Application of heat pipe technology in thermal analysis of metals

Summary Thermal analysis has been used in foundry applications to assess the quality of the melt before casting. The high-end thermal analysis techniques such as DSC or DTA are expensive and not suitable for foundry applications. The Computer-Aided Cooling Curve Analysis (CA-CCA) method based on one thermocouple has been widely used as a batch process with poor control over heat extraction and cooling rates during solidification. A heat pipe apparatus has been developed as a thermal analysis tool. The apparatus can assess the melt quality more accurately, as well as, allow for better control of heating and cooling rates. Moreover, the solidification process can be modeled more accurately, and thus the casting parameters affecting the casting quality can be closely simulated and consequently controlled. In this paper the principles of a heat-pipe assisted thermal analysis system are highlighted. The advantages of the new system are described and the possibility of its adoption in melt assessments is discussed.     

Application of stabilized zero valent iron nanoparticles for immobilization of lead in three contrasting spiked soils

Research on Chemical Intermediates - This study was conducted to synthesize and characterize the ZVINs stabilized with acid ascorbic (AAS-ZVINs) and to assess their ability to immobilize Pb2+ in...     

Effect of methoxyl group position on the regioselectivity of ammonia substitution reactions involving 3,3'-dichloro-2,2'-binaphthoquinones

A series of methoxyl-substituted 3,3'-dichloro-2,2'-binaphthoquinones 2 were prepared and evaluated for regioselectivity in ammonia substitution reactions. Biquinone 2b underwent regiospecific amination at the unsubstituted chloronaphthoquinone unit whereas the isomeric biquinone, 2c, produced moderate regioselectivity (85:15). Biquinone 2d, however, showed no level of regioselectivity demonstrating that the position of the methoxyl group influences the regiochemistry. The intramolecular hydrogen bond in biquinone 5 altered the regioselectivity. Semiempirical calculations revealed comparatively larger LUMO coefficients at the chlorinated carbons that underwent preferential substitution.