Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and conder and young methods

The Conder and Young (CY) and the peak maximum (PM) methods were used to estimate the retention time of n-alkane probes on chemithermomechanical pulp (CTMP) wood fibers treated with a low molecular weight grade phenol-formaldehyde resin (PFR). Thermodynamic functions (ΔH_a^o, ΔG_a^o, and ΔS_a^o) and the London dispersive component of the surface energy were derived from these retention times. Treated wood fibers show a high energy surface due to the presence of the thermoset resin on their surface. Values of ΔH_a^o obtained from the CY method were higher than those obtained with the PM method at relatively high temperatures and with relatively low molecular weight alkanes. The results from the two methods were identical at low temperature (293 K) and with the relatively high molecular weight alkane n-undecane.     

Unexpected ring transformation to pyrrolo[3.2-b]pyridine derivatives. Fused azolium salts. 22

2-Arylsulfanyl and 2-benzylsulfanylpyridinium N-arylimides (2) easily prepared from 3-aryltetrazolopyridinium salts (1) with aryl and benzylthiolates, respectively, reacted with various dipolarophiles yielding cycloadducts that underwent transformation to give tetrahydropyrrolo[3,2-b]pyridines (5, 6, and 8) in good yields. A similar rearrangement (formation of 15) was also observed in the case of parent derivatives being unsubstituted in position 2 (12). The abscence of any significant solvent effect, comparison of the sulfur and non-sulfur analogues, as well as the stereoselective nature of the observed ring transformation seem to support a sigmatropic mechanism. Structure elucidation of the products has been carried out by single-crystal X-ray diffraction and (1)H NMR experiments.     

THE USE OF SPIN LABEL OXIMETRY IN THE STUDY OF PHOTODYNAMIC INACTIVATION OF CHINESE HAMSTER OVARY CELLS

Spin label oximetry has been used to study the effects of photosensitizer hematoporphyrin on oxygen consumption in Chinese hamster ovary cells. These measurements demonstrate that, in the presence of the sensitizer, there occurs (i) an increase in total oxygen consumption during irradiation and (ii) a decrease in oxygen consumption following irradiation. These results are attributed to the effects of photosensitized oxygen consumption and decreased cellular respiration due to cell inactivation. Thus the inhibition of oxygen consumption after irradiation was shown to correlate with decreased cell survival measured in cell culture experiments. Possible mechanisms of inactivation and extensions of the oximetric approach are discussed.     

Electronic States of 1,5-Cyclooctadiyne Radical Cation and of Related Systems: The electronic structure of cis-bent carbon-carbon triple bonds

The photoelectron spectra of 1,5-cyclooctadiyne ( 2 ) and of 1,6-dithiacyclodeca-3,8-diyne ( 3 ) have been recorded. The first four ( 2 ) or six ( 3 ) PE. bands have been assigned as follows; in increasing order of ionization potentials: The relative sequence and the positions of the PE. bands are explained in terms of through-bond and through-space interactions between the basis π-orbitals and σ-orbitals of appropriate symmetry behaviour. An analysis of the PE. spectroscopic data for cyclooctyne ( 1 ) and for ( 2 ) indicates that a cis-bend of the acetylene moiety by θ < 20° leads to a split in energy of the in-plane and out-of-plane basis π-orbitals which is smaller than ∽ 0.2 eV. This is in agreement with the predictions derived from semiempirical models (MINDO/2, SPINDO) and qualitative orbital arguments. However, it is shown by using orbital localization procedures, that the rationales underlying the two semiempirical models differ significantly.     

Solvation of amino acid residues in water and urea-water mixtures: Volumes and heat capacities of 20 amino acids in water and in 8 molar urea at 25°C

The limiting partial molar volumes V ^o and heat capacities C _p ^o of 20 amino acids have been determined in water and in 8 molar urea at 25.0°C using flow calorimetry and flow densimetry. The side chain contributions to V ^o and C _p ^o were obtained as the difference between the properties of the various amino acids and those of glycine, both in water and in 8M urea. The solvent accessible surface area of the amino acid residues were obtained using a method developed by Hermann, and the total surface areas were separated into their hydrophobic A _Hb and hydrophilic components. In water, C _p ^o values for the various residues C _p ^o (R) were found well correlated with A _Hb , though much less so in the urea solution. Hence, C _p ^o (R) values, in water yield a good estimate of side chain hydrophobicity, but the (waterurea) transfer heat capacities appear strongly affected by specific solvation effects in the urea solution.Presented at the sixth Italian meeting on Calorimetry and Thermal Analysis (AICAT) held in Naples, December 4–7, 1984.     

Indirect determination of soluble trace elements in certified reference materials by neutron activation analysis

Since 1983 we have analyzedaqua regia extracts from environmental reference materials of 5 different soils and 4 different sludges by neutron activation analysis. Aqua regia as such is not accepted for irradiation in a nuclear reactor, and therefore the solution has to be evaporated to dryness, mixed and dried to constant weight before an aliquot can be taken and subjected to instrumental neutron activation analysis (INAA). Results for leachable Cr and Zn were found to display greater variability than results for total contents of these elements, and the reasons for this will be discussed.For the 1994 certification campaign for one soil and two sludges we have chosen to determine the total content of trace elements in these reference materials by INAA before and afteraqua regia leaching. The leachable contents are then found indirectly as a difference between the two results; in this way we eliminate the sources of uncertainty associated with the drying and handling of theaqua regia extracts, and we reduce the contributions from counting statistics.     

The development and validation of a novel LC–MS/MS method for the quantification of cenicriviroc in human plasma and cerebrospinal fluid

A high-performance liquid chromatography tandem mass spectrometric method was developed and validated for cenicriviroc (CVC) quantification in human plasma and cerebrospinal fluid (CSF). The method involved precipitation with acetonitrile and injecting supernatants onto the column. Separation was achieved on an XBridge C₁₈ column with a gradient elution of 0.1% formic acid in water and acetonitrile. Analyte detection was conducted in positive ion mode using selected reaction monitoring. The m/z transitions were: CVC (697.3 → 574.3) and CVC-d7 (704.4 → 574.3). Calibration curve ranged from 5 to 1000 ng/mL for plasma and from 0.241 to 15.0 ng/mL for CSF. The intra- and inter-day precision and accuracy were <15% for both plasma and CSF across four different concentrations. CVC recovery from plasma and artificial CSF was >90%. The method was utilized for the measurement of patients’ plasma and CSF samples taking a dose of 50, 150 and 300 mg q.d.     

Optimization of microfluidization for the homogeneous distribution of cellulose nanocrystals (CNCs) in biopolymeric matrix

Microfluidization, which is a high-pressure homogenization technique, was used to develop highly dispersed cellulose nanocrystal (CNC) reinforced chitosan based nanocomposite films. A three factor central composite design with five levels was designed to systematically optimize the microfluidization process. The three factors were the CNC content, the microfluidization pressure and the number of microfluidization cycles. Response surface methodology was used to obtain relationship between the mechanical properties of the nanocomposite films and the factors. Polynomial equations were generated based on the regression analysis of the factors and the predicted properties of the nanocomposite films were in good agreement with the experimental results. Microfluidization effectively reduced the CNC–chitosan aggregates and improved the mechanical properties of the nanocomposite films. Microscopic analysis of the microfluidized nanocomposite films revealed a 10–15 times reduction in the size of the aggregates compared to the non-microfluidized CNC/chitosan films and an increase in the root mean square surface roughness (Rq).     

Precise determination of 6Li cold collision parameters by radio-frequency spectroscopy on weakly bound molecules

We employ radio-frequency spectroscopy on weakly bound (6)Li(2) molecules to precisely determine the molecular binding energies and the energy splittings between molecular states for different magnetic fields. These measurements allow us to extract the interaction parameters of ultracold (6)Li atoms based on a multichannel quantum scattering model. We determine the singlet and triplet scattering lengths to be a(s) = 45.167(8)a(0) and a(t) = -2140(18)a(0) (1a(0) = 0.052 917 7 nm), and the positions of the broad Feshbach resonances in the energetically lowest three s-wave scattering channels to be 83.41(15), 69.04(5), and 81.12(10) mT.