Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.     

The impact of flow injection on modern chemical analysis: has it fulfilled our expectations? And where are we going?

Presenting a condensation of the opening lecture of the 12th ICFIA conference, this communication presents a view of the impact that flow injection analysis (FIA) has had on modern analytical chemistry, evaluated both within the academic community and outside it, i.e. in “industry”. The ensuing developments of FIA, encompassing sequential injection analysis (SIA) and bead injection lab-on-valve (BI-LOV), are described and their individual features discussed. Finally, some recent results of the activities from the author’s own research group are briefly mentioned.     

On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

Within the last decade, the first generation of flow injection (FI) has been supplemented by sequential injection (SI), also termed the second generation, and, recently, by the third generation, i.e., SI-Lab-on-Valve (SI-LOV). As apparent from the literature, FI and/or SI have become dominant as substitutes for labor-intensive, manual, sample-pre-treatment and/or solution-handling procedures prior to analyte detection by inductively coupled plasma mass spectrometry (ICP-MS). The present review presents and discusses the progress of the state of the art in implementing miniaturized FI/SI systems for on-line matrix separation and pre-concentration of trace levels of metals with detection by ICP-MS. It highlights some of the frequently applied on-line, sample-pre-treatment schemes, including solid phase extraction (SPE), on-wall molecular sorption and precipitate/(co)-precipitate retention using a polytetrafluoroethylene (PTFE) knotted reactor (KR), solvent extraction-back extraction and hydride/vapor generation. It also addresses a novel, robust approach, whereby the protocol of SI-LOV-bead injection (BI) on-line separation and pre-concentration of ultra-trace levels of metals by a renewable microcolumn is interfaced to ICP-MS, as conducted in the present authors' group. It discusses the future outlook in this field.     

Correlation Between Foam Flow Structure in Porous Media and Surfactant Formulation Properties

Transport in Porous Media - The optimization of foam injection in porous media for enhanced oil recovery or soil remediation requires a large screening of surfactant formulations. Tests of foam...     

UV/VIS Spectrophotometric Studies on the Antileukemic Agent Glyoxal bis(Amidinohydrazone) [‘Glyoxal bis(Guanylhydrazone)’]

Glyoxal bis(amidinohydrazone) (GBG) and several analogs thereof are compounds of considerable pharmacological interest, and a variety of HPLC and MECC methods have been developed for their analysis. In these methods, detection is invariably based on the strong UV absorption of the compound. Yet, almost nothing has been known of their UV and VIS spectral properties. In the present paper the UV and VIS Spectroscopy of GBG has been studied in several solvent systems (water, 0. 03 M aqueous sodium acetate buffer, 0. 1 inM aqueous NaOH and dimethylsulfoxide). In the case of solutions in bare water, the shape of the UV spectrum depends drastically on concentration, probably because of changes in the species distribution of GBG as a function of concentration. The spectrum comprises one maximum at ca. 200 nm, and between ca. 250 nin and 400 nm an absorption region with distinctly higher absorbance. In the case of aqueous sodium acetate as well as NaOH solutions, one strong maximum can be detected (at ca. 285–288 nm and 332–337 nm, respectively). In both cases, the maximum occurs at constant wavelength, being independent of concentration. In dimethylsulfoxide, the spectrum of GBG contains an absorption band at distinctly higher wavelengths (λ_max 354 nm) than in any one of the aqueous solvents studied, indicating that solvent effects are considerable in the UV spectrum of GBG. In no case, distinct absorption could be detected at wavelengths higher than 400 nm. The results indicate that if aqueous media are used as elements in HPLC analyses of bis(amidinohydrazones) or as solvents in direct UV analysis, they must be buffered.     

Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Gold(I)-catalyzed intramolecular cyclopropanation of dienynes

Gold(I) complexes are the most active catalysts for the biscyclopropanation of dienynes to form tetracyclic compounds. PtII and ZnII are also able to promote the biscyclopropanation, although less efficiently. The configurations obtained in all cases with the use of gold(I) catalysts can be explained by the pathway proceeding through anti cyclopropyl gold carbenes. Similar intermediates are most probably involved in reactions catalyzed by RuII and PtII. Two different cyclopropanation pathways have been found; they depend on the structures of the cyclopropyl gold carbenes (anti or syn) and the relative arrangements of the metal carbenes and the alkenes.