A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Epoxy based coatings on glass: strengthening mechanisms

Glass may be strengthened by epoxy coatings although the strengthening mechanisms remain unclear. Possible strengthening mechanisms are reviewed and are used to analyse strength data for both a solvent based and a water based coating system. The coatings either fill (solvent based coatings), or partially fill (water based coatings) surface cracks and it is shown that closure stresses arising from the thermal expansion mismatch of the coating within these cracks can account for the observed degrees of strengthening. It is also demonstrated that other suggested mechanisms such as flaw healing cannot fully account for the observed degree of strengthening.     

The investigation of critical parameters in the glycolytic response of single living cells by rapid microspectrofluorometric analysis

Summary NAD(P)H fluorescence emission spectra are recorded from single living cells, by a recently developed multichannel microspectrofluorometric technique, in correlation with the intracellular microelectrophoretic addition of substrate (i. e., glucose-6-P). These spectra may be used as a reference basis in establishing the critical parameters to be followed when the same studies are extended to a variety of cells, submitted to various drug effects or physical treatments. The sum-spectra corresponding to channel by channel (wavelength by wavelength) summation of spectra obtained from various cells within a series, before and after addition of substrate, and their difference spectrum may be normalized and evaluated comparatively. The NAD(P)H emission maximum prior to addition of substrate seems to present a mixture of dehydrogenase-bound and free coenzyme. There is a suggestion that immediately after substrate, i. e., at 5 sec, an increase in free NADH is first observed. While the overall changes in fluorescence intensity associated with substrate are quite large (50–150% increase), the counts (i. e., an expression of photons) associated with shifts in the emission maximum (free vs. bound NAD(P)H changes) are at times barely above noise. Rapid microspectrofluorometry provides in principle the most direct approach for the identification of coenzyme bound to various dehydrogenases in single living cells, but further improvements in spectral resolution and signal-to-noise ratio are required, for a better definition of the spectral shifts which may be observed.

---

Zusammenfassung Mit Hilfe einer kürzlich entwickelten Mehrkanal-Mikrospektrofluorometer-Methode wurden von einzelnen lebenden Zellen nach intrazellulär mikroelektrophoretischer Substratzugabe (z. B. Glucose-6-P) NAD(P)H Fluoreszenz-Emissionsspektren aufgenommen. Diese Spektren können als Vergleichsbasis bei der Festsetzung der entscheidenden Parameter verwendet werden, wenn die gleichen Untersuchungen auf eine Reihe von Zellen ausgedehnt werden sollen, die verschiedenen Medikamenteffekten oder physikalischer Behandlung ausgesetzt werden. Die Summenspektren, die der kanalmäßigen (wellenlängenmäßigen) Summierung der Spektren von verschiedenen Zellen innerhalb einer Serie, vor und nach Substratzugabe entsprechen, sowie ihre Differenzspektren können normalisiert und vergleichsweise ausgewertet werden. Das NAD(P)H-Emissionsmaximum vor der Substratzugabe scheint ein Gemisch von freiem und dehydrogenasegebundenem Coenzym darzustellen. Unmittelbar nach Substratzugabe (d. h. nach 5 sec) ist ein Anstieg an freiem NADH das erste Mal zu beobachten. Während die mit dem Substrat einhergehenden Gesamtveränderungen der Fluoreszenzintensität recht groß sind (50–150% Anstieg), sind die Impulse (als Effekt der Photonen), die mit einer Verschiebung im Emissionsmaximum verbunden sind (Veränderungen von freiem und gebundenem NAD(P)H) zu manchen Zeiten kaum höher als das Rauschen. Die rasche Mikrospektrofluorometrie stellt im Prinzip die direkteste Methode zur Identifizierung von Coenzymen dar, die an verschiedenen Dehydrogenasen in einzelnen lebenden Zellen gebunden sind. Weitere Verbesserungen der Spektralauflösung und der Empfindlichkeit (signal-to-noise ratio) sind notwendig, um die Spektralverschiebungen, die beobachtet werden, besser auswerten zu können.

     

Synthesis and NMR-Spectroscopic Structure Determination of Novel 7,7′-Diphenyl-7,7′-diapocarotenoids

Wittig reaction of crocetindial ( 1 ) and benzylidenetripenylphosphorane ( 2 ) gave (7E, 7′Z)-7,7′-diphenyl-7-7′-diapocarotene ( 3 ), instead of the previously reported (7E, 7′E)-isomer. Similar reaction of 8,9-didehydrocrocetindial ( 4 ) with 2 yielded the three acetylenic isomers 5a–c which differ in the configuration of the terminal double bonds. Structures were established by 1D- and 2D-NMR studies. Illustrative spectra and their interpretation are presented. Most chemical shifts of corresponding protons in 3 and 5 and nearly identical, but ¹³C shifts differ considerably.     

Size and persistence length of molecular bottle-brushes by Monte Carlo simulations

Single-chain simulations of densely branched comb polymers, or "molecular bottle-brushes" with side-chains attached to every (or every second) backbone monomer, were carried out by off-lattice Monte Carlo technique. A coarse-grained model, described by hard spheres connected by harmonic springs, was employed. Backbone lengths of up to 100 units were considered, and compared with the corresponding linear chains. The backbone molecular size was investigated as a function of its length at fixed arm size, and as a function of the arm size at fixed backbone length. The apparent swelling exponents obtained by a power-law fit were found to be larger than those for the corresponding linear polymers, indicative of stiffening of the comb backbone. The probability distribution function for the backbone end-to-end distance was also investigated for different backbone lengths and arm sizes. Analysis of this function yielded the critical exponents, which revealed an increase in the swelling exponent consistent with values found from the molecular size. The apparent persistence length of the backbone was also determined, and was found to increase with increasing branching density. Finally, the static structure factors of the whole bottle-brushes and of their backbones are discussed, which provides another consistent estimate of the swelling exponents.     

Degeneracy of the Antithrombin Binding Sequence in Heparin: 2-O-Sulfated Iduronic Acid Can Replace the Critical Glucuronic Acid

Heparin binds to and activates antithrombin (AT) through a specific pentasaccharide sequence, in which a trisaccharide subsite, containing glucuronic acid (GlcA), has been considered as the initiator in the recognition of the polysaccharide by the protein. Recently it was suggested that sulfated iduronic acid (IdoA2S) could replace this “canonical” GlcA. Indeed, a heparin octasaccharidic sequence obtained by chemoenzymatic synthesis, in which GlcA is replaced with IdoA2S, has been found to similarly bind to and activate antithrombin. By using saturation-transfer-difference (STD) NMR, NOEs, transferred NOEs (tr-NOEs) NMR and molecular dynamics, we show that, upon binding to AT, this IdoA2S unit develops comparable interactions with AT as GlcA. Interestingly, two IdoA2S units, both present in a ¹C₄-²S₀ equilibrium in the unbound saccharide, shift to full ²S₀ and full ¹C₄ upon binding to antithrombin, providing the best illustration of the critical role of iduronic acid conformational flexibility in biological systems.     

Structural studies of iron in vitrified toxic wastes

The formation of iron carbides by reactive milling of α-Fe and C powders is reported. The products formed were analyzed by Mössbauer spectroscopy and X-ray diffraction. It was found that iron carbide phases start forming after an incubation period of about 3 h depending on the ball-to-powder weight ratio (BPR). Carbide amounts increased with increasing milling time while α-Fe content decreased. Energy transfer increased with increasing BPR and high BPR resulted in an increase in the reaction rate. Although it was not possible to selectively synthesise a specific Fe _x C phase, samples containing predominantly one type of carbide phase, either Hägg carbide or cementite, were successfully prepared. The formation of the different iron carbide phases is discussed within the context of the Fe–C phase diagram for non-equilibrium processes.