Interactions of Imidazolium Based Ionic Liquids with Water Studied by Density and Speed of Sound Measurements: Effect of the Chain Length of an Alkyl Substituent on the Imidazolium Ion

Densities and speeds of sound of three ionic liquids (ILs), 1-ethyl-3-methyl imidazoliumtetrafluoroborate (C₂mimBF₄), 1-butyl-3-methylimidazoliumtetrafluoroborate (C₄mimBF₄) and 1-hexyl-3-methylimidazoliumtetrafluoroborate (C₆mimBF₄) were measured in aqueous solutions at (288.15, 293.15, 298.15, 303.15 and 308.15) K. These data were used to calculate the volumetric properties apparent molar volume and apparent molar isentropic compression as a function of molality. Infinite dilution values for these properties were evaluated by an extrapolation procedure based on Redlich–Meyer type equations. Apparent molar isobaric expansions at infinite dilution were also obtained from the slopes of the apparent molar volume at infinite dilution versus temperature. All these properties are interpreted in terms of IL–water interactions. The hydrolysis of the \( {\text{BF}}_{4}^{ - } \) anion of the ILs and its effects on the results is discussed.     

Structural properties of new spiro-1,3-propanediaminocyclotriphosphazene derivatives

New 1,3-propanediaminocyclotriphosphazene derivatives (7-17) were synthesized from the reactions of spiro-1,3-propanediaminocyclotriphosphazene, N₃P₃Cl₄[NH(CH₂)₃NH] (1) with the cyclopropanemethylamine (2), cyclohexylamine (3), pyrrolidine (4) cyclohexanol (5), cyclopropylmethanol (6). The structures of the novel compounds (7-17) were characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy. The molecular structures of 8, 12 and 13 were determined by X-ray crystallography. The structures of all these three compounds are in the monoclinic crystal system; compounds 8 and 12 have the P21/c space group while compound 13 has the P21/n space group. The ring conformation of the cyclotriphosphazene and other external rings were investigated based on the X-ray crystal structures.     

Determination of some phthalate acid esters in artificial saliva by gas chromatography-mass spectrometry after activated carbon enrichment

The determination of six phthalate acid esters was achieved in artificial saliva using gas chromatography-mass spectrometry following activated carbon enrichment of samples. Central composite experimental design was applied to optimize method parameters, such as pH, adsorption time and amount of activated carbon. The best compromise of analytical conditions for the simultaneous determination of analytes from spiked artificial saliva were found to be: pH (3), adsorption time (30 min), activated carbon amount (1.8 g L⁻¹) and elution solvent (chloroform). These conditions were applied to study the migration of phthalate acid esters from different children's toys into saliva. A horizontal agitation method was applied to extract the analytes from plastic toys into saliva for 2 h at 37 °C. The detection limits of the method were in the range of 1.3-5.1 μg L⁻¹, while the relative standard deviation (%) values for the analysis of 100 μg L⁻¹ of the analytes were below 3.0% (n = 5). Di-2-ethylhexyl phthalate was the main analyte found in these samples.     

Assesment of dimethyl phthalate removal from aqueous phase using barium hexaferrite containing magnetic beads

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly (ethylene glycol dimethacrylate-vinyl pyridine; mag-poly [EGDMA-VP]) beads (average diameter=53-212 μm) were synthesized and characterized. Their use as an adsorbent in the removal of dimethyl phthalate (DMP) from an aqueous solution was investigated. The mag-poly (EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly (EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM), and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DMP from aqueous solutions such as pH, initial concentration, contact time, and temperature were analyzed. The maximum DMP adsorption capacity of the mag-poly (EGDMA-VP) beads was determined as 96.2 mg/g at pH 3.0, 25 °C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo-first-order, pseudo-second-order, Ritch-second-order, and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DMP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.     

Preconcentration of uranium(VI) and thorium(IV) from aqueous solutions using low-cost abundantly available sorbent

Olive cake as low-cost abundantly available sorbent has been characterized by N₂ at 77 K adsorption, porosity analysis, elemental analysis and IR spectra and has been used for preconcentrating of uranium(VI) and thorium(IV) ions prior to their determination spectrophotometrically. The optimum pH values for quantitative sorption of U(VI) and Th(IV) are 4–7 and 3–7, respectively. The enrichment factor for the preconcentration of U(VI) and Th(IV) were found to be 125 and 75 in the given order. The sorption capacity of olive cake is in the range of 2,260–15,000 μg g⁻¹ for Th(IV) and in the range of 1,090–17,000 μg g⁻¹ for U(VI) at pH 3–7. The sorbent exhibits good reusability and the uptake and stripping of the studied ions were fairly rapid. The elution of U(VI) and Th(IV) was performed with 0.3–1 M HCl/1–2 M HNO₃ and 0.3–0.8 M HCl/1 M HNO₃, respectively. The precision of the method was 1.8 RSD% for U(VI) and 2.5 RSD% for Th(IV) in a concentration of 1.00 μg mL⁻¹ for 10 replicate analysis. The influence of some electrolytes and cations as interferents was discussed. Separation of U(VI) and Th(IV) from other metal ions in synthetic solution was achieved.     

Complexation and transport of amino acid esters and their salts with synthesised chiral novel aza crown ether derivatives

The syntheses of four aza-15-crown-5 ethers bearing phenyl and phenoxymethyl moieties attached to a stereogenic centre on the crown ring were achieved. Macrocycles have exhibited strong binding ability (K_a = 5364–12,969 M^? 1) and modest enantiomeric discrimination towards the enantiomers of amino acid methyl ester salts by UV titration method in CHCl₃ at 25°C. Computer modelling results supported experimental data providing a detailed understanding of the molecular recognition mode between hosts and guests and the likely binding sites involved. Macrocycles were used for chiral discrimination of amino acids in their zwitterionic forms or as potassium and sodium salts in transport experiments across a bulk chloroform membrane with satisfactory selectivity.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Preparation of New Calix[4]arene-Immobilized Biopolymers for Enhancing Catalytic Properties of Candida rugosa Lipase by Sol–Gel Encapsulation

The article describes preparation of new calixarene biopolymers consisting of the immobilization of convenience calixarene derivative onto cellulose and chitosan biopolymers, and the encapsulation of these calixarene biopolymers with Candida rugosa lipase within a chemical inert sol–gel supported by polycondensation with tetraethoxysilane and octyltriethoxysilane. The catalytic properties of immobilized lipase were evaluated into model reactions employing the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of naproxen methyl esters from racemic prodrugs in aqueous buffer solution/isooctane reaction system. The resolution studies using sol–gel support have observed more improvement in the enantioselectivity of naproxen E?=?300 with Cel-Calix-E than with encapsulated lipase without calixarene-based materials. Furthermore, the encapsulated lipase (Cel-Calix-E) was still retained about 39 % of their conversion ratios after the fifth reuse in the enantioselective reaction.     

Performing thermodynamic analysis by simulating the general characteristics of the two-spool turbojet engine suitable for drone and UAV propulsion

Journal of Thermal Analysis and Calorimetry - This study presents determining performance parameters as well as thermodynamic analysis through certain design parameters of a two-spool turbojet...