Phosphomolybdic acid supported on silica gel and promoted with alkali metal ions as catalysts for the esterification of acetic acid by ethanol

Different ratios of phosphomolybdic acid PMA supported on silica gel (1–30 wt%) and promoted with alkali metal hydroxide have been prepared by an impregnation method and calcinated at 350 °C for 4 h. The catalysts were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffraction, FT-IR spectroscopy and N₂ adsorption measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of 2-propanol. The gas-phase esterification of acetic acid by ethanol was carried out in a conventional flow bed reactor. The results clearly revealed that among the PMA loading, the use of 10 wt% catalyst showed maximum yield of ethyl acetate. This catalyst also improved on addition of Na or K-hydroxide. These results were correlated with the structure and the acid–base properties of the prepared catalysts.     

Structural and Catalytic Activity of V2O5-Supported on AlPO4 Catalysts

Summary. A series of AlPO₄-V₂O₅ (APV) systems with various vanadia amounts 1–30mol% were prepared by the impregnation method and calcinated at 400 and 600°C for 4h. The catalysts were characterized by TG/DTG, DSC, IR spectroscopy, XRD, N₂ adsorption, and electrical conductivity measurements. The surface acidity and basicity of the catalysts were studied by the dehydration-dehydrogenation of isopropyl alcohol and the adsorption of pyridine. The catalytic gas phase esterification of acetic acid with ethyl alcohol was carried out at 210°C in a flow system at 1atm using air as a carrier gas. The results showed that the catalysts calcinated at 400°C were active and selective towards the formation of ethyl acetate whereas the calcination of samples at 600°C led to a drastic reduction in both activity and selectivity. Good correlations were obtained between catalytic activities towards ester formation and acidity of the prepared catalysts.     

Synthesis, reactions and biological evaluation of some new naphtho[2,1-b]furan derivatives bearing a pyrazole nucleus

Vilsmeier formylation of 2-(1-phenylhydrazonoethyl)naphtho[2,1-b]furan (2) gave 3-naphtho[2,1-b]furan-2-yl-1-phenyl-1H-pyrazole-4-carbaldehyde (3), which was reacted with C- and N-nucleophiles to afford naphthofuranpyrazol derivatives 4-8. Treatment of 2-[(3-(naphtho[2,1-b]furan-2-yl)-1-phenyl-1H-pyrazol-4-yl)methylene]-malononitrile (4a) with reactants having active hydrogen and Et?N gave the corresponding pyrazoline, pyran and chromene addition product derivatives 10, 12 and 13, consisting of three different connected heterocyclic moieties. Reaction of 1-((3-(naphtho[2,1-b]furan-2-yl)-1-phenyl-1H-pyrazol-4-yl) methylene)-2-phenylhydrazone (6b) with AcONa and ethyl bromoacetate or chloroacetone afforded the thiazolidinone and methylthiazole derivatives 14 and 15, respectively. In addition, intramolecular cyclization of 6d with Ac?O afford the corresponding 1,3,4-thiadiazol-2-yl acetamide derivative 16. The structures of the synthesized compounds were confirmed by IR, 1H-NMR/13C-NMR and mass spectral studies. Compound 14 showed promising effects against the tested Gram positive and negative bacteria and fungi.     

Evanescent waves in FGM spherical curved plates: an analytical treatment

A deep understanding of both guided propagating and evanescent waves is very essential for non-destructive evaluation. Guided propagating waves have received considerable attention, but the research on guided evanescent waves is quite limited, especially for functionally graded structures. This paper presents an analytical approach, based on the orthogonal function technique, to solve the evanescent waves in a spherical curved plate with functionally graded material in the radial direction. The proposed approach can obtain all the real, imaginary and complex solutions but without iterative process. The validity of the proposed approach is illustrated by comparison with available results. The convergence of the approach is also discussed through a numerical example. Dispersion characteristics of the guided waves in various graded spherical curved plates are studied and three dimensional dispersion curves are plotted in frequency-complex wavenumber space. The effects of different radius-thickness ratios and graded fields on the dispersion curves of the guided evanescent waves are illustrated. The displacement distributions are also discussed to analyze the characteristics of the guided evanescent waves.     

Synthesis, reactions and antimicrobial activities of 8-ethoxycoumarin derivatives

Condensation of 3-acetyl-8-ethoxycoumarin (3) with thiosemicarbazide gave ethylidenehydrazinecarbothioamide 5, which was transformed into the thiazolidin-4-one derivatives 6,7. Interaction of 3 with DMF/POCl(3) gave b-chloroacroline derivative 8. Treatment of 3 with malononitrile gave benzo[c]chromone and 2-aminobenzonitrile derivatives 9 and 10, respectively with respect to the reaction conditions. Condensation of 3-(2-bromoacetyl)-8-ethoxycoumarin (4) with o-phenylenediamine gave 3-(quioxaline-2-yl)-8-ethoxycoumarin hydrobromide (11), while 4 reacted with 2-aminopyridine to give chromenopyridopyrimidine derivative 12. Condensation of 4 with potassium thio-cyanate/methanol gave an unexpected derivative, 2H-chromeno-3-carboxy(methyl-carbonimidic)thioanhydride 16, which upon treatment with (NH(2))(2)·H(2)O gave 3-ethoxy-2-hydroxybenzaldehyde azine 19. Interaction of 4 with thiourea derivatives gave thiazole derivatives 20a-c. The structures of the newly synthesized compounds were confirmed by their spectra data. The newly synthesized compounds were also screened for their antimicrobial activity.     

The influence of adding marble and granite dust on the mechanical and physical properties of PP composites

Journal of Thermal Analysis and Calorimetry - The purpose of this work is to investigate the opportunity of re-using M&G wastes to get novel PP composites. Recycling of marble and granite...     

Ion-Solvent Interaction of Biunivalent Electrolytes in Dioxane-Water Mixtures from Conductivity Data at Different Temperatures

This paper presents the conductivity measurements for some alkaline earth metal salts MgCl₂, MgBr₂, Mg(NO₃)₂, CaCl₂, CaBr₂ and Ca(NO₃)₂ by which the ion-solvent interactions are reported in the concentration range in dioxane-water mixtures at mass fraction of 0, 3, 10, 20 and 30% at 30°, 35°, 40° and 45°C ± 0.01. The conductance data were analyzed for the limiting molar conductivity, A_o, by the Fuoss-Edelson conductivity equation for the 2:1 unsymmetrical electrolytes. The results were discussed in terms of the solute-solvent interaction from the temperature coefficient of Walden product, Λ_oη of the electrolyte solutions. Moreover, Λ_oη was found to exhibit a linear relationship with the dielectric constant, ?, of the dioxane-water mixtures. The study gives information regarding the ion-solvent interactions from the mobilities and Walden product of the ions in the solvent. The ions appear to interact appreciably and the ion-solvent interaction tends to increase in the order Ca > Mg for the same anion while for the anions, the trend decreases in the order Cl^? < Br^? < No^?₃.     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Removal of Some Pesticides from Aqueous Solutions using PVP/(AAc-co-Sty) Hydrogels Prepared by Gamma Radiation

Poly(N-vinyl-2-pyrrolidone)/(acrylic acid-co-styrene) [PVP/(AAc-co-Sty)] hydrogels were prepared by γ-irradiation to design as adsorptive systems. The adsorption of agricultural pesticides Fluometuron (FH), Thiophanate Methyl (TF) and Trifluralin (TI) on radiation-induced graft copolymeric adsorbents has been studied. The prepared hydrogels were characterized by FT-IR spectroscopy, scanning electron microscopy (SEM), and the thermal properties were studied by using thermal gravimetric analysis (TGA) and Differential scanning calorimetry (DSC). The ionic character of the prepared hydrogel was improved by treatment with alkaline (NaOH), sulfonation (Sf) and alkaline/sulfonation (NaOH/Sf). The swelling as a function of PVP concentration, AAc/Sty composition, irradiation dose, temperature and pH were studies. The adsorption of pesticides on the hydrogel matrix under different conditions was studied to determine which factors have the most affect and control the adsorption capacity of hydrogel. AAc/Sty composition, type of pesticide, temperature, concentration and pH of pesticide feed solution are greatly affect the pesticide uptake. It was found that the prepared hydrogels have a great efficiency to recover the pesticides from their solutions, the maximum pesticide uptake was found to be in the sequence: TI > TF > FH. The results concluded that the alkaline/sulfonation- treated PVP/(AAc-co-Sty) hydrogels possess high efficiency for removal of pesticides.