DETECTION OF DNA-PSORALEN PHOTOADDUCTS in situ

Abstract— An immunological method, with the use of specific immune serum, has been developed for detection of 8-methoxypsoralen (8-MOP) photoadducts to DNA, formed in situ in cell nuclei, after combined treatment with 8MOP and UV-A irradiation (Zarçbska et al. , 1978). Lymphocytes fixed on slides or in suspension, and cryostat sections of different mammalian tissues, served as antigenic substrate, after treatment with 8-MOP and UV-A in vitro. Specific fluorescence in these substrates was detected in the nuclei after treatment with 30 ˜ 140 kJ/m² UV-A in the presence of 0.1-0.3 μg/cm² 8-MOP. PHA-stimulated-lymphocytes appeared to be the most sensitive substrate.
However, hairless mice treated with high doses of UV-A in vivo , 70 ˜ 360 kJ/m² did not reveal a specific fluorescence of epidermal nuclei, unless a high local concentration of 8-MOP was attained.
The apparent discrepancy in the level of photoadduct detection between the in vitro and in vivo treated specimens was explained by the low number of DNA-8-MOP-photoadducts formed in vivo under these experimental conditions. The relevance of these findings to the role of DNA-8-MOP-photoadducts formed during PUVA photochemotherapy is discussed.     

ON QUOTIENTS OF BRAID GROUPS

ABSTRACT.

Let G be the group ?[t, t ^?1] x ?. By studying the action of the braid group B_n on the set Gⁿ , we obtain representations of B_n into a wreath product of the symmetric group and the general linear group over ?[t, t ^?1]. This in particular recovers the Burau representation of the braid group. Furthermore, some quotients of the braid group are obtained by using the representations found.     

Radiation synthesis of starch-acrylic acid–vinyl sulfonic acid/multiwalled carbon nanotubes composite for the removal of 134Cs and 152+154Eu from aqueous solutions

Starch-acrylic acid-co-vinyl sulfonic acid/multiwalled carbon nanotubes (starch-AA-VSA/f-MWCNTs) bionanocomposite was successfully synthesized using gamma radiation for initiate the grafting of AA/VSA on starch in the presence of f-MWCNTs by template polymerization technique. The structural characteristics were confirmed by FTIR, SEM, and TGA. The adsorption behaviors of bionanocomposite toward Eu(III) and Cs(I) were examined using the batch adsorption experiments. Langmuir and Freundlich’s models were used to fit the experimental data of the adsorption isotherms. Kinetic studies showed that the adsorption data followed the pseudo-second-order model. Thermodynamic studies indicated that the reaction was favorable at high temperature and endothermic process.

     

Development of adenosine sensor: effect of physiological buffers on activity and sensitivity in adenosine determinations by fast scan voltammetry

A new fast scan voltammetry (FSV) method was tested in the determinations of adenosine in physiological buffers at pH 7.4. The buffers can be used in the determinations of adenosine in vivo and include 7 x 10(-2) M phosphate, Krebs-Henseleit (K-H) and Hanks' Balanced Salts (HBSS). A new method of fabrication of carbon fiber electrodes (CFEs) by polishing, followed by electrochemical pretreatment (ECP) was developed for the determination. After the ECP of CFE, CFE background current was stable in FSV determinations even though an increase in the background current was observed after the ECP in the buffers at pH 7.4. The sensitivity in FSV determinations of adenosine at the pretreated electrodes was tested in the physiological buffers at the potential scan rate of 500 V s(-1) at pH 7.4. Buffer composition and pH was the same during the ECP of CFE and in the FSV determinations. The sensitivity in the FSV determinations of adenosine at the new CFEs was high, compared to that previously reported at CFEs prepared by other methods, and showed a limited dependence on buffer composition. However, a small increase in buffer pH above 7.4 resulted in a decrease in sensitivity in the determinations of adenosine. The decrease in sensitivity was associated with an additional increase in CFE background current at pH > 7.4. At pH 7.4 best sensitivity and limit of detection was obtained in 7 x 10(-2) M phosphate buffer, where the background current was lowest. The sensitivity was half that in K-H and HBSS. Standard deviation of measurements was ca. 1%. The results demonstrate the feasibility of sensitive FSV determinations of adenosine in physiological buffers at pH 7.4 at CFEs.     

Chromatographic separation of In(III) from Cd(II) in aqueous solutions using commercial resin (Dowex 50W-X8)

This work assesses the potential of an adsorptive material, Dowex 50w-x8, for the separation of indium ions from cadmium ions in aqueous media. The adsorption behavior of Dowex 50 w-x8 for indium and cadmium ions was investigated. The effect of pH, initial concentration of metal ions, the weight of resins, and contact time on the sorption of each of the metal ions were determined. It was found that the adsorption percentage of the indium ions was more than 99% at pH 4.0. The result shows that In (III) was most strongly extracted, while Cd(II) was slightly extracted at this pH value. The recovery of In(III) and Cd(II) ions is around 98% using hydrochloric acid as the best eluent.      

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate), PHA, polymer produced by the bacterial strain Alcaligenes eutrophus using saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing less than 10 kDa. The intact oligomers were detected in their cationized [M + Na](+) and [M + K](+) forms by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicate that the oligomers obtained via acid catalysis were terminated with a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) termination. In addition to HB (hydroxy butyrate), the oligomers were found to contain a small percentage of HV (hydroxy valerate). This was independently confirmed using gas chromatography/mass spectrometry (GC/MS). In comparison, the analysis of a commercial PHA polymer, transesterified under identical conditions, only showed the presence of HB, i.e. a pure PHB homopolymer. Copyright 1999 John Wiley & Sons, Ltd.     

Reactivation of Promoted Nickel Catalysts for Deuterium Exchange between Hydrogen and Water in the Vapour Phase

Binary promoted nickel – chromium oxide and ternary promoted nickel – chromium oxide – aluminium oxide mixed catalysts were prepared for use in the present study. The catalysts were prepared by co-precipitation of the corresponding metal nitrates as carbonates followed by calcination in nitrogen atmosphere at 350 °C and reduction in hydrogen atmosphere at 320 °C. To prevent spontaneous oxidation of the catalysts, bidistilled water was added followed by heating of the catalyst mixtures at about 110 °C in hydrogen atmosphere for few hours. Deactivation of catalysts was studied by measurements of the variation of their activities with the time of contact of the reacting gas mixtures with the catalyst surface in the reaction chamber. It was found that while the catalytic activity of ternary catalysts for the isotopic exchange of deuterium between hydrogen and water vapour was higher than that of the binary one, the loss in activity of the former teas faster than the latter. Reactivation of the catalysts were carried out at different temperatures between 110–160°C in hydrogen atmosphere. Catalytic activity measurements indicated that higher temperatures are better for the reactivation process.     

More efficient Brownian dynamics algorithms

We examine the relative efficiencies of three- algorithms for performing Brownian Dynamics simulations without many-body hydrodynamics. We compare the conventional Brownian Dynamics algorithm of Ermak (CBD), Smart Monte Carlo (SMC) which incorporates Boltzmann sampling into essentially a CBD procedure, and the Stochastic Runge Kutta (SRK) method. We show, using the repulsive potential φ(r) = ε(σ/r) ⁿ , where n = 36 and 72, that the SRK algorithm gives the most accurate short-time dynamics for the mean-square displacements. The SRK algorithm static and dynamical properties converge better with a reducing time step to the exact values, than those generated by the CBD algorithm; giving efficiency gains typically of a factor of 3–4. Both CBD and SMC have the incorrect sign for the first correction term to the mean square displacement in a time step, whereas the SRK algorithm gives essentially the exact solution to order Δt ², where Δt is the simulation time step. In fact, these correction terms are almost equal and opposite in sign. Expressions for these terms were derived in terms of the average interaction energy per particle. The force, shear and bulk stress autocorrelation functions were calculated. The average energy per particle and time correlation functions at short time have values in excess of the exact values, while the corresponding quantities for SRK are below this. This difference in behaviour can be traced back to the extent of compliance of the particle trajectories with the exact expansion of the Smoluchowski equation. The accuracy, at a given value of the time step, of the stochastic algorithms can significantly depend on the form of the interaction potential between particles. It is also demonstrated that the long time limits of various correlation functions are fairly insensitive to a particular scheme (SRK or CBD) used in the simulations. All the correlation functions have a stretched exponential region at intermediate to long times, and the values of the exponents on density and force law steepness have been determined.