Simultaneous Spectrophotometric Determination of Imipramine Hydrochloride with Chlordiazepoxide and Nortriptyline Hydrochloride with Fluphenazine Hydrochloride

Spectrophotometry was used with multivariate calibration to simultaneously determine compounds in mixtures. Two antidepressant mixtures were investigated: imipramine hydrochloride and chlordiazepoxide and nortriptyline hydrochloride and fluphenazine hydrochloride. Considerable spectral overlap and large differences in component concentrations were challenges. Since this type of analysis is often performed using complex algorithms, a simple strategy was used here for the simultaneous determination of both mixture components by classical least squares, principal component regression, and partial least squares. Experimental design was used to select the optimum parameters including the wavelength range, sampling interval, software, and derivative order. Accuracy was enhanced by proper wavelength selection. In addition, derivatives of the raw spectra improved the selectivity. The standard deviation, deviation of mean recovery from 100%, and prediction ability of the models were used as the responses. In respect to these terms, first-order derivatization of the spectra and a sampling interval of 1?nm provided the best results. In particular, the low concentration compounds in the mixtures (chlordiazepoxide and fluphenazine) were determined more accurately with precision lower than 3%. The strategy was used for the quality control of pharmaceuticals containing the mixtures without chemical pretreatment.     

PRESSURE-VELOCITY EQUILIBRIUM HYDRODYNAMIC MODELS

This article describes mathematical models for phase separated mixtures of materials that are in pressure and velocity equilibrium but not necessarily temperature equilibrium. General conditions for constitutive models for such mixtures that exhibit a single mixture sound speed are discussed and specific examples are described.     

Correlation between biological activity and energies of electronic transitions in benzodiazepines. Negative ion mass spectrometry and ultraviolet absorption spectroscopy study of some derivatives

A correlation between the energies of electronic singlet transitions in benzodiazepines and their biological activity, which was revealed earlier by means of negative ion mass spectrometry with resonance electron capture, has been verified with a UV absorption spectroscopy investigation. Also, it has been noted that the energies of electronic singlet transitions in benzodiazepines are close in value to the ionization energies of atoms Cs, Rb, K, Na, Li and Tl, the cations of which are known to play an important role in nerve cell excitation processes. Copyright 1999 John Wiley & Sons, Ltd.     

Gas-phase deprotonation of arylalkylamines. A collision-induced dissociation study

The collision-induced dissociation (CID) of deprotonated arylalkylamines of general formula R(1)C(6)H(4)CHR(2)CH(2)NR(3)(2) (where R(1) = H, OH, F or NO(2); R(2) = H or OH; R(3) = H or CH(3)) generated by negative chemical ionization with H(2)O and D(2)O as ionizing reagents, is discussed. The negative chemical ionization mass spectra show that, in the absence of a hydroxy group in the aromatic ring, deprotonation takes place at the benzylic position whereas the proton is lost from the OH group when present. The nitro compound forms only M(-.) ions. The CID spectra of the deprotonated molecules show that fragmentations are strongly dependent on the structural features of the molecules, namely the presence or absence of substituents in the aromatic ring or aliphatic chain. Copyright 1999 John Wiley & Sons, Ltd.     

Purification and Characterization of Agarase from Marine Bacteria <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. PS12B and Its Use for Preparing Bioactive Hydrolysate from Agarophyte Red Seaweed <Emphasis Type="Italic">Gracilaria verrucosa</Emphasis>

Acinetobacter strain PS12B was isolated from marine sediment and was found to be a good candidate to degrade agar and produce agarase enzyme. The extracellular agarase enzyme from strain PS12B was purified by ammonium sulfate precipitation followed by DEAE-cellulose ion-exchange chromatography. The specific activity of the crude enzyme which was 1.52 U increased to 45.76 U, after two-stage purification, with an enzyme yield of 9.76%. Purified enzyme had a molecular mass of 24 kDa. The optimum pH and temperature for activity of purified agarase were found to be 8.0 and 40 °C, respectively. The K_m and V_max values for agarase were 4.69 mg/ml and 0.5 μmol/min, respectively. Treatment with EDTA reduced the agarase activity by 58% at 5 mM concentration. The enzyme activity was stimulated by the presence of Fe²⁺, Mn²⁺, and Ca2⁺ ions while reducing reagents (β-mercaptoethanol and dithiothreitol, DTT) enhanced its activity by 30–40%. The purified agarase exhibited tolerance to both detergents and organic solvents. Major hydrolysis products of agar were DP4 and also a mixture of longer oligosaccharides DP6 and DP7. The enzyme hydrolysed seaweed (Gracilaria verrucosa) exhibited strong antioxidant activity in vitro. Successful hydrolysis of seaweed indicates the potential use of the enzyme to produce seaweed hydrolysate having health benefits as well as the industrial application like the production of biofuels.     

Computer extended series solution for unsteady flow in a contracting or expanding pipe

Unsteady flow in a semi-infinite contracting or expanding pipeis reinvestigated using long series analysis. The proposed seriesmethod is useful in analysing the problem for a moderately largeconstant ( = aa/, where a = a(t), the radius of the pipe isa function of time, a(t) is the velocity of the wall, and iskinematic viscosity). For positive values of (expansion ofthe pipe) accuracy of the series representing shear stress andpressure gradient is increased from = 2.89 to = 6.0 by extractingthe singularity followed by completion of the series. For negativevalues of (contraction of the pipe), we revert the series whichresults into the increase of the region of validity of the transposedseries from = -25.0 to = -2.89. Later we use Padé approximantsfor summing them. Also, the asymptotic solution for large valuesof is obtained and it agrees closely with pure numerical valuesof shear stress at the wall and pressure gradient.     

Stability indicating methods for the determination of some fluoroquinolones in the presence of their decarboxylated degrades

Two stability-indicating methods, namely densitometric TLC and derivative spectrophotometry for the determination of the fluoroquinolone antibacterials lomefloxacin (Lfx), moxifloxacin (Mfx), and sparfloxacin (Sfx) in the presence of their acid degrades are described. Acid degradation was adopted and the main decarboxylated product separated by TLC. Degradation products were identified confirming a previously mentioned degradation scheme. The densitometric method is based on the separation of the intact drug from its acid degradation product on silica gel G plates using different mobile phases and the spots of the intact drugs were scanned at 288, 290, and 292 nm for Lfx, Mfx, and Sfx, respectively. The derivative spectrophotometric method utilizes first derivative D(1) UV spectrophotometry with zero crossing points at 295.2 nm for Lfx, 280.4 and 303.4 nm for Mfx, and 280.8 nm for Sfx. Regression analysis of Beer's plots showed good correlation in the concentration ranges 0.2-1.2, 0.1-1.4, and 0.5-2.0 microg/spot for Lfx, Mfx, and Sfx, respectively, in the densitometric method and 2-16 microg/ml for all drugs in the derivative spectrophotometric method. The proposed methods were successfully applied for the determination of the investigated drugs in bulk powder with mean percentage accuracy ranges from 98.93 to 101.25% for the TLC method and from 98.18 to 100.35% for the D(1) method. The proposed methods were also applied for the determination of the investigated drugs in their pharmaceutical dosage forms and their validity was assessed using the standard addition technique with mean percentage recovery ranging from 100.25 to 101.70% in the TLC method and from 99.27 to 102.12% in the D(1) method. The selectivity of the proposed methods was tested by the analysis of laboratory-prepared mixtures containing different percentages of the studied drugs and their acid degrades. The proposed methods were found selective for the determination of the intact drugs in the presence of up to 90% of their degrades in the TLC method and 70% for Lfx and 90% for Mfx and Sfx in the D(1) method.