Investigation of a UV-laser generated waveguide in a planar polymer chip using an improved interferometric method

Polymeric integrated-optical waveguides are prepared in a planar polymer chip by UV-laser lithographic methods. The waveguide samples are irradiated by an excimer laser at a wavelength Λ=248 nm with various irradiation parameters (different fluencies and irradiation doses). Mach-Zehnder interferometer is employed and the refractive index depth profiles of the waveguide samples are obtained. This profile covers two regions having exponential and Gaussian shapes. The model field distributions strongly depend on the refractive index of each region. The mode field distribution and the effective mode indices for each region have been calculated on the basis of a theoretical model and the experimentally measured data.     

Development of selective separation method for thorium and rare earth elements from monazite liquor

The present work succeeded to develop new optional procedures to enhance the separation process of thorium and REEs. Selective precipitation of thorium with pyrophosphate was successfully attained for the upscale level in which, complete and efficient thorium separation (99%) was achieved with relatively low co-precipitation of REEs (average 15%) and Fe(III) (2.6%). On the other hand, promising and costless method has been developed to optimize the selective precipitation of REEs by adjusting the ratio of the free acids H₂SO₄ to H₃PO₄ at 5:1. It could be obviously demonstrated that about 65.3% of LREEs could be precipitated with a minor amount of thorium 11.9%. Finally, this proposed method could be successfully applied for production of Th and REEs with relatively high yield and purity in addition to low-cost–benefit.     

Quantum dynamics of heavy light heavy reactions: Application to (F + CH4 → FCH3 + H) reaction

We apply the time-dependent theory to the collinear exchange reaction F + CH₄ → FCH₃ + H. We have performed detailed calculations on two-dimensional potential surfaces representing the ground electronic potentials of the collinear F + CH₄ → FCH₃ + H reaction, at incident energies. Transmission coefficients range from zero to unity, depending upon the incident energy. Normal modes of vibrations are displayed along the reaction path.     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

NMR Spectrometric Analysis of Antazoline

An analytical method is described for the analysis of antazoline [2-(N-benzylanilinomethyl) imidazoline] using pmr. The procedure provides good quantitative results together with a very specific mean for identification of antazoline     

Two different spectrofluorimetric methods for simultaneous determination of gemfibrozil and rosiglitazone in human plasma

Two accurate, reliable, and highly sensitive spectrofluorimetric methods were developed for simultaneous determination of binary mixture gemfibrozil and rosiglitazone in human plasma without prior separation steps. The first method is based on synchronous fluorescence spectrometry using double scans. At Δλ = 27 nm, gemfibrozil yields detectable signal that is independent of the presence of rosiglitazone. Similarly, at Δλ = 120 nm the signal of rosiglitazone is not influenced by the presence of gemfibrozil. Signals at two wavelengths, 301 (Δλ = 27 nm) and 368 nm (Δλ = 120 nm) vary linearly with gemfibrozil and rosiglitazone concentrations over the range 100-700 ng mL⁻¹ (for gemfibrozil) and 20-140 ng mL⁻¹ (for rosiglitazone), respectively. The limits of detection (LOD) were 2.3 and 2.72 ng mL⁻¹ for gemfibrozil and rosiglitazone, respectively. The second method is based on the technique of simultaneous equations (Vierodt's method), in which 258 nm was selected as the excitation wavelength. Two equations are constructed based on the fact that at (λEm₂=302 nm of gemfibrozil) and (λEm₂=369 nm of rosiglitazone) the fluorescence of the mixture is the sum of the individual fluorescence of gemfibrozil and rosiglitazone. The limits of detection (LOD) were 28.1 and 23.63 ng mL⁻¹ for gemfibrozil and rosiglitazone, respectively. The proposed methods were successfully applied for the determination of the two compounds in synthetic mixtures and in human plasma with a good recovery.     

Thermal radiation effects on MHD flow past a semi-infinite inclined plate in the presence of mass diffusion

MHD mixed free-forced heat and mass convective steady incompressible laminar boundary layer flow of a gray optically thick electrically conducting viscous fluid past a semi-infinite inclined plate for high temperature and concentration differences is studied. A uniform magnetic field is applied perpendicular to the plate. The density of the fluid is assumed to reduce exponentially with temperature and concentration. The usual Boussinesq approximation is neglected due to the high temperature and concentration differences between the plate and the ambient fluid. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The boundary layer equations governing the flow are reduced to ordinary differential equations, which are numerically solved by applying an efficient technique. The effects of the density/temperature parameter n, the density/concentration parameter m, the local magnetic parameter M_x and the radiation parameter R are examined on the velocity, temperature and concentration distributions as well as the coefficients of skin-friction, heat flux and mass flux.     

Nuclear quantum effects in calculated NMR shieldings of benzene; a Feynman path integral study

The Feynman path integral Monte Carlo approach has been coupled to the gauge including atomic orbital formalism in order to analyse the absolute magnetic shieldings of the benzene nuclei under the conditions of thermal equilibrium. The Hamiltonian employed in the derivation of ensemble averaged NMR quantities is of the Hartree-Fock type. The basis set used is of 6–31G quality. The spatial delocalization of the atoms leads to a deshielding of both types of benzene nuclei relative to the shieldings experienced at the minimum of the potential energy surface. This deshielding has to be traced back to bond length elongations in thermal equilibrium. The influence of the nuclear fluctuations on the NMR parameters of benzene is quantum driven up to temperatures of 400 K; classical fluctuations are of minor importance in this low-temperature window.