Three Validated Methods for Simultaneous Determination of Ofloxacin and Dexamethasone in Binary Mixture

JPC – Journal of Planar Chromatography – Modern TLC - Three selective, precise, and accurate methods were developed and validated for the simultaneous determination of ofloxacin and...     

Y2O2S∶Er3+，Yb3+的制备及Er3+离子在晶场中的能级分裂

采用沉淀法制备前驱体,通过不同温度合成了上转换发光材料Y2O2S∶Er3+,Yb3+,运用XRD,SEM和上转换发射光谱对其进行表征。结果表明,所合成的Y2O2S∶Er3+Yb3+属于六方晶系晶体,随着合成温度的升高,产物的粒径不断增大,上转换发射光强度逐渐增加。研究Y2O2S∶Er3+Yb3+的上转换发光过程,红光发射和绿光发射分别源于Er3+离子的4F9/2→4I15/2以及2H11/2→4I15/2,4S3/2→4I15/2能级跃迁。利用群论计算了晶场中Er3+离子的能级分裂数目。     

Ion-Pair LC Method for Simultaneous Determination of Aliskiren Hemifumarate,Amlodipine Besylate and Hydrochlorothiazide in Pharmaceuticals

A rapid and precise LC method was developed for the simultaneous determination of aliskiren hemifumarate (ALS), amlodipine besylate (AML) and hydrochlorothiazide (HCZ) using acetonitrile:25 mM octane sulfonic acid sodium salt monohydrate in water (60:40 v/v) as the mobile phase. The flow rate was maintained at 1.2 mL min^?1 on a stationary phase composed of Supelco, Discovery^® HS (C18) column (25 cm × 4.6 mm, 5 μm). Isocratic elution was applied throughout the analysis. Detection was carried out at λ _max (232 nm) at ambient temperature. The method was validated according to ICH guidelines. Linearity, accuracy and precision were satisfactory over the concentration ranges of 32–320, 2–44 and 4–64 μg mL^?1 for ALS, AML and HCZ, respectively. LOD and LOQ were estimated and found to be 0.855 and 2.951 μg mL^?1, respectively, for ALS, 0.061 and 0.202 μg mL^?1, respectively, for AML as well as 0.052 and 0.174 μg mL^?1, respectively, for HCZ. The method was successfully applied for the determination of the three drugs in their co-formulated tablets. The results were compared statistically with reference methods and no significant difference was found. The developed method is specific and accurate for the quality control and routine analysis of the cited drugs in pharmaceutical preparations.     

一类含测度的非强制拟线性椭圆方程解的存在性和不存在性

本文主要研究如下含非线性梯度项的非强制拟线性椭圆方程\begin{equation*}\left \{\begin{array}{rl}-\text{div}(\frac{|\nabla u|^{p-2}\nabla u}{(1+|u|)^{\theta(p-1)}})+\frac{|u|^{p-2}u|\nabla u|^{p}}{(1+|u|)^{\theta p}}=\mu,~&x\in\Omega,\\ u=0,~&x\in\partial\Omega,\end{array}\right.\end{equation*} 弱解的存在性和不存在性, 其中$\Omega\subseteq\mathbb{R}^N(N\geq3)$ 是有界光滑区域, $1相似文献   

Stability indicating methods for the determination of some anti-fungal agents using densitometric and RP-HPLC methods

Two chromatographic methods were developed for the determination of some anti-fungal drugs in the presence of either their degradation products or cortisone derivatives. The densitometric method determined mixtures of each of ketoconazole (KT), clotrimazole (CL), miconazole nitrate (MN) and econazole nitrate (EN) with the degradation products of each one. Mixtures of MN with hydrocortisone (HC) and of EN with triamcinolone acetonide (TA) were also successfully separated and determined by this technique. For KT and CL, a mixture of methanol:water:triethylamine (70:28:2 v/v) was used as a developing system and the spots were scanned at 243 nm and 220 nm for KT and CL, respectively. For MN and EN, a mixture of hexane:isopropyl alcohol:triethylamine (80:17:3 v/v) was used as a developing system and the spots were scanned at 225 nm for both drugs. The HPLC method determined mixtures of CL or EN with their degradation products which were separated and quantified on a Zorbax C8 column. Elution was carried out using methanol:phosphate buffer pH 2.5 (65:35 v/v) as a mobile phase at a flow rate of 1.5 ml/min and UV detection at 220 nm for CL. For EN, a mixture of methanol:water containing 0.06 ml triethylamine pH 10 (75:25 v/v) was used as a mobile phase at a flow rate of 1.5 ml/min and UV detection at 225 nm. The methods were also used to separate mixtures of CL with betamethasone dipropionate (BD) and EN with TA in a laboratory prepared mixture and in pharmaceutical preparations. The methods were sensitive, precise and applicable for determination of the drugs in pharmaceutical dosage forms.     

Triblock copolymer Pluronic®F127 sustains insulin release and reduces initial burst of microspheres—in vitro and in vivo study

In many cases, initial release of drugs from microparticles is undesirable. In the present study, Pluronic^®F127, which shows thermosensitive characteristic, was used for controlling both the initial release and the sustained release of insulin from microspheres. Calcium-alginate insulin microspheres were prepared by emulsion technology and dispersed in a thermosensitive semisolid gel, the PF127. In vitro study demonstrated that PF127 could protect the activity of insulin in some extent and control the initial release and sustained release of insulin well. The results of in vivo hypoglycemic experiment carried out on diabetic rats also displayed a well correlation with in vitro release patterns. The results suggested that PF127 could sustain insulin release through a subcutaneous injection, and this material was available to deliver insulin aiming for prolonged and smooth hypoglycemic function.     

Neutron diffraction and computer simulation study of liquid CS2 and CSe2

The structure factor of liquid CS₂ has been measured at ambient temperature by the 7C2 diffractometer at the Laboratoire Leon Brillouin?, Saclay, France. The result has been modelled by the reverse Monte Carlo (RMC) method. The only reported neutron diffraction measurement on liquid CSe₂ has also been investigated in detail. In both cases initial configurations for the RMC runs have been obtained by molecular dynamics simulation using a simple soft sphere potential. It has been found that the main features of experimental results have been reproduced even by this choice suggesting that the structure of these systems is almost entirely described by the excluded volume. Examination of model size dependence of results has also been carried out revealing the importance of using large simulation boxes.     

带多个形状参数的Bézier曲线

基于Bézier曲线升阶的思想,构造了带多个形状参数的Bézier曲线,它具有与Bézier曲线相同的性质.在控制顶点不变的情况下,可通过改变多个形状参数的取值调整曲线的形状.n次Bézier曲线是n次带多个形状参数的Bézier曲线的一个特例,多个形状参数可使曲线变化更灵活.     

Liquid chromatographic determination of sitagliptin either alone or in ternary mixture with metformin and sitagliptin degradation product

Two reversed-phase liquid chromatographic (RP-LC) methods have been developed for the determination of sitagliptin phosphate monohydrate (STG). The first method comprised the determination of STG alone in bulk and plasma; and in its pharmaceutical preparation. This method was based on isocratic elution of STG using a mobile phase consisting of potassium dihydrogen phosphate buffer pH (7.8)-acetonitrile (70:30, v/v) at a flow rate of 1 mL min⁻¹ with flourometric detection. The flourometric detector was operated at 267 nm for excitation and 575 nm for emission. In the second method, the simultaneous determination of STG and metformin (MET) in the presence of sitagliptin alkaline degradation product (SDP) has been developed. In this method, the ternary mixture of STG, MET and SDP was separated using a mobile phase consisting of potassium dihydrogen phosphate buffer pH (4.6)-acetonitrile-methanol (30:50:20, v/v/v) at a flow rate of 1 mL min⁻¹ with UV detection at 220 nm. Chromatographic separation in the two methods was achieved on a Symmetry^® Waters C18 column (150 mm × 4.6 mm, 5 μm). Linearity, accuracy and precision were found to be acceptable over the concentration ranges of 0.25-200 μg mL⁻¹ for STG with the first method and 5-160 μg mL⁻¹, 25-800 μg mL⁻¹ for STG and MET, respectively with the second method. The optimized methods were validated and proved to be specific, robust and accurate for the quality control of the cited drugs in pharmaceutical preparations.