Simultaneous Flow Injection Analysis of Paracetamol and Ascorbic Acid with Multiple Pulse Amperometric Detection

The present work reports a simple and quick strategy for simultaneous determination of paracetamol (PC) and ascorbic acid (AA) in pharmaceutical formulations using flow injection method with multiple pulse amperometric detection. The method allows the resolution of the mixture without chemical pretreatment of the sample or electrode modification or the use of chemometric techniques for data analysis. The compounds are detected by applying four sequential pulses (waveform) in function of time to a three‐electrode amperometric system that uses a wall‐jet cell with gold as working electrode. AA is direct detected at +0.40 V and PC is indirectly detected at 0.0 V by the reduction (desorption) of the oxidation product (N‐acetyl‐p‐benzoquinoneimine) electrochemically generated at +0.65 V. The fourth potential pulse (?0.05 V) is applied for the complete regeneration (cleaning) of the gold electrode surface. The linear response range was optimized between 5 and 24 mg L^?1 for AA and 50 and 240 mg L^?1 for PC. The difference between the two responses ranges (10‐fold) present correlation with the concentration of these compounds in two different pharmaceutical formulations available in the Brazilian market. The analytical frequency was calculated in 60 injections per hour. The use of the proposed methodology for PC quantification in the presence of higher AA concentrations was also carried out. Using the standard addition method, it was possible to detect PC in trace levels (LD=0.2 mg L^?1) in the presence of 880‐fold more of AA (176 mg L^?1).     

Hexagonal mesoporous silica modified with copper phthalocyanine as a photocatalyst for pesticide 2,4-dichlorophenoxiacetic acid degradation

A new mesoporous catalyst was prepared by the reaction between 3-aminopropyltrimethoxisylane and Cu(II)-hexadecafluorophthalocyanine, followed by co-condensation of tetraethylorthosilicate around a micelle formed by n-dodecylamine. The surfactant was removed from the pores by continuous extraction with ethanol, giving the Si-CuF16Pc catalyst. This catalyst was characterized by SEM, FTIR, TGA, 29Si NMR, N2 adsorption and X-ray diffraction. SEM images confirmed that the catalyst material is formed by nanoaggregates with a diameter of 100 nm. N2 adsorption isotherms showed that Si-CuF16Pc has a surface area of approximately 200 m2 g(-1) and a porous diameter of 7.7 nm, characterizing the mesoporosity of this product. This novel material shows an excellent photocatalytic activity, degrading almost 90% of 2,4-dichlorophenoxyacetic acid (2,4-D) up to 30 min, while only approximately 40% of photodegradation was obtained in its absence.     

Heats of combustion of biofuels obtained by pyrolysis and by transesterification and of biofuel/diesel blends

The obtained heats of combustion were 46.65 ± 0.20; 38.09 ± 0.31; 39.67 ± 0.22; 41.88 ± 0.31; 37.86 ± 0.46; 39.89 ± 0.09; 41.28 ± 0.31 MJ/kg for diesel, transesterified soybean oil, pyrolysed soybean oil and crude soybean oil, transesterified palm tree oil (Elaeis sp.), pyrolysed palm tree oil, crude palm tree oil, respectively. The results show the heats of combustion of biofuels are approximately 17% smaller than traditional diesel. The data also show the heats of combustion depend on the methodology used for the biofuel production. Addition of biofuels to traditional diesel fuel results in a linear decrease of the heat of combustion with the amount of the alternative fuel added to the diesel. However, for blends with 5% biofuels, which is the limit demanded by Brazilian legislation, no significant decrease of the heat of combustion of the commercial diesel was observed.     

Determination of Trace Elements in Vegetable Oils and Biodiesel by Atomic Spectrometric Techniques—A Review

Abstract

The determination of trace elements in edible oils and biodiesel using atomic spectrometric methods is reviewed. Problems related to sample pretreatment for appropriate sample introduction and calibration are addressed as well as the strategies to overcome them. Recent trends aimed at simplifying sample manipulation are presented. The applications and scope of atomic absorption spectrometry (AAS), flame optical emission spectrometry (F-OES), inductively coupled plasma–optical emission spectrometry (ICP-OES), and inductively coupled plasma–mass spectrometry (ICP-MS) techniques for the determination of trace metals in edible oils and biodiesel are discussed, as well as some current instrumental new developments.     

The interaction at the solid/liquid interface of 2,4-dichlorophenoxyacetic acid with silica modified by reaction with ammonia gas

A method for the attachment of ammonia to modified silica gel has been developed. In the first step, tetraethylorthosilicate and (3-glycidoxypropyl)trimethoxysilane were co-condensed in the presence of n-dodecylamine, a neutral surfactant template, to produce a modified mesoporous silica. The epoxy group incorporated into the mesoporous silica was opened by ammonia gas thus introducing amine chelate groups covalently bound to the inorganic surface. The modified material contained 1.13+/-0.06 mmol of amine per gram of silica, exhibited a surface area of 831+/-29 m(2)g(-1) and a porous diameter of 1.95 nm. Infrared, 29Si and 13C NMR spectra were in agreement with the proposed structure of the modified mesoporous silica in the solid state. This ordered organic-inorganic hybrid presented a high capacity for the removal of the agrochemical 2,4-dichlorophenoxyacetic acid from water: the DeltaH and DeltaG values for the interaction were determined to be -110.61 and -9.37 kJ mol(-1), respectively.