Development and publication of work with selective ion-sensitive electrodes

Features concerning development, response, selectivity and applications of selective ion-sensitive electrodes are reviewed. Recommendations are made concerning investigations involving the development and applications of electrodes and attention given to the manner of presenting data for publication.     

Total axle load effects on soil compaction

Theoretical and applied research has shown that the pressure at a point in the subsurface soil is a function of both the surface unit pressure and the extent of the area over which it is applied (total load). Thirty years ago, most of the soil compaction from vehicle traffic was in the plow layer and was removed by normal cultural practices. As equipment has increased in size and mass, machine designers have increased tire sizes to keep the soil surface unit pressure relatively constant. However, the increase in total axle loads is believed to have caused an increase in compaction at any given depth in the soil profile, resulting in significant compaction in the subsoil.Two tires of different sizes, a standard agricultural tire and a flotation tire were used to support equal loads. Soil pressures were measured at three depths in the soil profile directly beneath each of the tires. Two soils were used and each was prepared first in a uniform density profile, and then they were prepared with a simulated traffic pan (layer of higher density) at a depth of approximately 30 cm.Results showed that the presence of a traffic pan in the soil profile caused higher soil pressures above the pan and lower pressures below it than was the case for a uniform soil profile. The soil contact surface of the flotation tire was approximately 22% greater than the agricultural tire. The greater contact surface did reduce soil pressures at the soil surface, of course, but the total axle load was still the dominant factor in the 18–50 cm-depth range used in this study.     

Effects of soil and operational parameters on soil-tire interface stress vectors

Normal and tangential stress vectors were measured at the soil-tire interface of a pneumatic tractor tire on firm and soft soils. Stress magnitudes were determined with a transducer which was designed to measure both normal and tangential stresses. The orientation of the transducer was determined using a 3-dimensional, sonic digitizing system which was mounted inside the air cavity of the tire. Data are presented from tests conducted at zero input torque, zero net traction, and 0.15 net traction ratio which show the effects of inflation pressure, dynamic load, and soil conditions on the stress vectors.     

The efficacy of tilted axial MRI of the CNS

The angle between the straight axial plane and the orbito-meatal line was measured in 156 consecutive magnetic resonance examinations. Inconsistent head positioning caused this angle to vary by as much as 44 degrees. Careful positioning of the patient by the technologist can minimize this variability, leading potentially to improved image interpretation. To assess the merit of a standardized orientation for MR examinations of the head, straight axial and tilted axial MR scans were compared in 34 patients. The tilted images were obtained parallel to the orbito-meatal line and were found to be superior for visualization of the cerebellum. When correlative x-ray CTs are available or when an abnormality in the posterior fossa is suspected, tilted axial MR scans should be employed.     

Formant frequency discrimination by Japanese macaques (Macaca fuscata).

These studies investigated formant frequency discrimination by Japanese macaques (Macaca fuscata) using an AX discrimination procedure and techniques of operant conditioning. Nonhuman subjects were significantly more sensitive to increments in the center frequency of either the first (F1) or second (F2) formant of single-formant complexes than to corresponding pure-tone frequency shifts. Furthermore, difference limens (DLs) for multiformant signals were not significantly different than those for single-formant stimuli. These results suggest that Japanese monkeys process formant and pure-tone frequency increments differentially and that the same mechanisms mediate formant frequency discrimination in single-formant and vowel-like complexes. The importance of two of the cues available to mediate formant frequency discrimination, changes in the phase and the amplitude spectra of the signals, was investigated by independently manipulating these two parameters. Results of the studies indicated that phase cues were not a significant feature of formant frequency discrimination by Japanese macaques. Rather, subjects attended to relative level changes in harmonics within a narrow frequency range near F1 and F2 to detect formant frequency increments. These findings are compared to human formant discrimination data and suggest that both species rely on detecting alterations in spectral shape to discriminate formant frequency shifts. Implications of the results for animal models of speech perception are discussed.     

Investigation of the onset and development of forward scattering in an underdense plasma

We investigate the distortion of a spatial intensity modulation imposed on a 527 nm f/10 probe beam as it transmits through an underdense plasma characterized with Thomson scattering. Combining the measurements with full wave simulations of beam propagation through the entire plasma show that the key features of the data can be reproduced using the Kaiser thermal transport model.     

Short-Range Inverse-Square Law Experiment in Space

The objective of ISLES (Inverse-Square Law Experiment in Space) is to perform a null test of Newton's law in space with a resolution of one part in 10⁵ or better at 100 m. ISLES will be sensitive enough to detect axions with the strongest allowed coupling and probe large extra dimensions of string theory down to a few m. The experiment will be cooled to 2 K, which permits superconducting magnetic levitation of the test masses. This soft, low-loss suspension, combined with a low-noise SQUID, leads to extremely low intrinsic noise in the detector. To minimize Newtonian errors, ISLES employs a near null source, a circular disk of large diameter-to-thickness ratio. Two test masses, also disk-shaped, are suspended on the two sides of the source mass at a nominal distance of 100 m. The signal is detected by a superconducting differential accelerometer.