Local environment influence on the optical properties of block copolymers containing an epoxy-based azo-prepolymer

The aim of this contribution was the study of the influence of polymer matrix on the photo-induced orientation of azobenzene groups. Notably, an azo-prepolymer bearing hydroxyl groups was selectively confined in self-assembled phases of different block copolymers, randomly-epoxidized polystyrene-b-polybutadiene-b-polystyrene (SBSep) and polystyrene-b-poly-4-vinylpyridine (S4VP). The formation of hydrogen bonds between the azo-prepolymer and poly-4-vinylpyridine block, as well as the effect of the local environment surrounding the azo-prepolymer were investigated by Fourier transform infrared and ultraviolet–visible spectroscopies. In addition, the reversible optical storage properties of the developed materials were also studied. Birefringent properties of the systems based on S4VP were strongly enhanced by intermolecular interactions with the azo-prepolymer. Specifically, the maximum birefringence level attained by a system containing 13 wt% of azobenzene was around 2.3 × 10⁻² and its remaining birefringence was nearly three times higher than that of the neat azo-prepolymer. Furthermore, a morphological analysis of the designed materials was carried out by atomic force microscopy. Taking into account that the control of the microdomains ordering in block copolymer films is of current interest, special attention was focused on the influence of different variables on the arrangement of the block copolymer microdomains.     

Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels–Alder reaction

This study describes an environmentally friendly and green synthetic approach for the preparation of poly(aminoethylmethacrylate)-based hydrogels crosslinked through Diels–Alder (DA) reaction in water. This “click” reaction offers the possibility of preparing chemically crosslinked hydrogels in the absence of any catalyst, initiator or coupling agent, thus preserving the biocompatibility of the material. The suitable furan diene was obtained by modifying a methacrylate polymer by its reaction with furfural, a first generation compound derived from renewable resources. Methacrylate-based complementary polymeric dienophiles were also prepared by introducing maleimide groups into the structure. The products obtained at different steps were characterized by FTIR, NMR and TGA techniques. The study of the rheological properties of the hydrogels proved the success of this green “click” synthetic strategy confirming the formation of chemically crosslinked networks by the use of the Diels–Alder reaction. Furthermore, SEM studies revealed promising morphological properties of the ensuing hydrogels in terms of biomedical applications.     

Molecular Dynamics of PGA Bioabsorbable Polymer During Isothermal Cold Crystallization

An investigation was carried out on the molecular dynamics of poly(glycolide) (PGA) in its completely amorphous state and during isothermal cold crystallization. Experimental results were generated over a wide range of frequency and temperature by broad-band dielectric spectroscopy (DRS). The variation of the average relaxation time (defined as τ= ½πf_max where f_max is the frequency at maximum loss for the main α relaxation) has been studied during cold crystallization and the temperature dependence of this average relaxation time for completely amorphous and crystallized samples has been analyzed. This behaviour has been modelled by Havriliak-Negami and Vogel-Fulcher equations. The sensitiveness of the segmental dynamics to the degree of crystallinity has been analyzed, taking into account the relaxing segments and the amorphous layers between lamellae. Supporting evidence about the thermal behaviour of the polymers has been obtained with DSC. Complementarily, the evolution of the morphologies obtained during crystallization processes has been followed by optical microscopy.     

Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate

This third paper in this series regarding the mechanism and kinetics of urethane systems presents the results obtained in the study of the influence of molecular weight and chemical structure of several polycarbonate diols on the polycondensation reaction with 4,4′-diphenylmethane diisocyanate (MDI), comparing them with those obtained previously for condensation reaction with p-tolyl isocyanate (p-TI). The substitution effect induced in the second isocyanate group by the reaction of the first isocyanate group of a symmetric diisocyanate likes MDI has been studied by size exclusion chromatography (SEC) using a model monoalcohol. The condensation reaction kinetics is adequately described by an autocatalyzed third order rate equation. The values obtained for rate constants, using a Runge-Kutta mathematical model, suggest association phenomena by hydrogen bonding implying hydroxyl groups but also urethane groups. In bulk and in stoichiometric conditions, the association phenomena observed increase proportionally on one hand, to the decrease of molecular weight of macrodiol and on the other hand, to the tendency to form intramolecular hydrogen bonds. The activation energies were obtained from the evaluation of kinetic data at different temperatures in the range 45-65 °C. As association phenomena increase, activation energies decrease. The slightly higher activation energies obtained for polycondensation compared to condensation are explained because of the rapid increase of viscosity of the medium.     

A review of bacterial cellulose: sustainable production from agricultural waste and applications in various fields

Bacterial cellulose (BC) is a polymer with interesting conformation and properties. BC can be obtained in different shapes and is easily modified by chemical and physical means, so its applications in the production of new materials and nanocomposites for different purposes have been in the focus of many research projects. However, one of the major challenges to address in bacterium-derived polymer technology is to find suitable carbon sources as substrates that are cheap and do not compete with food production for achieving large scale industrial applications. Agricultural wastes are defined as the residues from the growing and processing of raw agricultural products such as crops, fruits, vegetables and dairy products. Their composition can vary depending on the type of agricultural activity and harvesting conditions, but these residues are suitable for the production of BC. The aim of this review is to give insight into the production of BC using agro-wastes and an overview of the most interesting and novel applications of this biopolymer in different areas i.e. environmental applications, optoelectronic and conductive devices, food ingredients and packaging, biomedicine, and 3D printing technology.

Graphic abstract

     

Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting‐from atom transfer radical polymerization

A key problem with nanomaterials is the difficulty of controlling the dispersion of nanoparticles inside an organic medium. To overcome this problem, functionalization of the nanoparticle surface is required. Poly(methyl methacrylate) (PMMA) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. Modified magnetic nanoparticles with a graft density of 0.1 PMMA chains/nm² were obtained. Cu(II), used as a deactivating complex, allowed good control of the polymerization along with a narrow polydispersity of the polymer chains. The functionalized magnetic nanoparticles were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, and atomic force microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 925–932, 2007     

Kinetics and Morphology of an Epoxy Resin Modified with PEO-PPO-PEO Block Copolymers

Block copolymers are a special class of polymers having the ability to self-assemble into nanoscale ordered structures which depend on molecular composition of the blocks. With the aim of studying the influence of copolymer composition, the kinetics of a 4,4′-diaminodiphenylmethane-cured diglycidyl ether of bisphenol-A (DGEBA) epoxy system modified with a PEO-PPO-PEO block copolymers has been investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), taking into account the relation between blocks in the copolymer as well as different copolymer contents. DSC results show that the rate of cure reaction decreases when the copolymer is added, which can be attributed to the interaction between the hidroxyl groups of the growing epoxy thermoset and the ether groups of the block copolymer observed by FTIR. The experimental results obtained have been related to the morphologies observed by atomic force microscopy (AFM).     

PI-b-PMMA diblock copolymers: nanostructure development in thin films and nanostructuring of thermosetting epoxy systems

Poly(isoprene-block-methyl methacrylate) (PI-b-PMMA) block copolymers with different block ratios have been used to generate nanostructures both in thin films and by nanostructuring a thermosetting epoxy system. Obtained morphologies have been analyzed in terms of atomic force microscopy. The nanostructuring of thin films was carried out by thermal and solvent vapor annealing, in which the copolymer films were exposed to acetone vapors, selective solvent for methyl methacrylate (PMMA) block. By solvent vapor annealing thin films of both copolymers self-assembled into a hexagonally packed cylindrical morphology. Thermal annealing was carried out above the glass transition temperature of both blocks, obtaining worm-like and lamellar morphologies, depending on the block ratio. One of the copolymers has also been used for nanostructuring an epoxy thermosetting system. Morphologies consisting of spherical-shaped PI domains dispersed in a continuous epoxy matrix in which PMMA remained miscible were obtained, independently of the copolymer amount.     

In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation

Polyurethane/Cellulose nanocrystal (CNC) nanocomposites have been prepared by means of in situ polymerization using CNCs as precursors of polyurethane chains. Thermal, mechanical and morphological characterization has been analyzed to study the effect of CNC on the micro/nanostructure, which consisted of individualized nanocellulose crystallites covalently bonded to hard and soft segments of polyurethane. The incorporation of low CNC content led to a tough material whereas higher amount of CNC provoked an increase in soft and hard segments crystallization phenomenon. Moreover, from the viewpoint of polyurethane and polyurethane nanocomposites applications focused on biomedical devices, biocompatibility studies can be considered necessary to evaluate the influence of CNC on the biological behaviour. SEM micrographs obtained from cells seeded on top of the materials showed that L-929 fibroblasts massively colonized the materials surface giving rise to good substrates for cell adhesion and proliferation and useful as potential materials for biomedical applications.     

By-products of the cider production: an alternative source of nutrients to produce bacterial cellulose

In the present work a culture process to produce bacterial cellulose (BC) using by-products of the cider production from the Basque Country was investigated. The apple pomace was mixed with sugar cane (AR/SC medium) and the mixture was found to be a potential carbon source for Gluconacetobacter medellinensis strain ID13488 since higher cellulose production was observed with respect to the commercial Hestrin and Shramm medium (H–S). The culture media were characterized in terms of pH, oxygen and sugars consumption. The expression level of the operon bcs (genes involved in BC biosynthesis) in apple residue containing medium respect to standard H–S medium was determined. It was found that in AR/SC medium the expression levels of bcsA gene, wich is the first gene of the bcs operon, was increased in 1.5-fold respect to the H–S media which correlates with the fact that BC production in AR/SC media is higher than in H–S media. The physico-chemical and mechanical properties, microstructure, crystallinity and water holding capacity of the biosynthesized BC membranes were analyzed and it was found that, in general, the BC obtained from AR/SC medium presented superior properties than that obtained from H–S medium. In this study an economic method for BC production is proposed with suitable properties for many applications.