Minimizing Side Product Formation in Alkyne Functionalization of Ruthenium Complexes by Introduction of Protecting Groups

The synthesis of alkyne functionalized bipyridine ruthenium complexes are reported. The improved synthetic approach through application of stable protecting groups prevents formation of possible side products while facilitating purification. By applying copper-catalysed azide-alkyne cycloaddition reactions (CuAAC) pyrene units with flexible alkyl linkers are introduced at the periphery of the complex, opening up various applications including surface immobilization and DNA intercalation. All complexes are characterized structurally as well as photophysically, especially regarding the influence of the introduced alkyne and triazolyl substituents on their photophysical behavior.     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

Nutritional Analysis of Red-Purple and White-Fleshed Pitaya (Hylocereus) Species

Pitaya is one of the most preferred and produced tropical fruit species recently introduced to the Mediterrranean region in Turkey. Due to its nutritional fruits with high economic value, the popularity of pitaya increases steadily in Turkey as an alternative crop. No detailed nutritional analysis has been undertaken in Turkey so far on fruits of the pitaya species. In this study, we determined and compared some nutritional parameters in fruit flesh of two pitaya (dragon fruit) species (Hylocereus polyrhizus: Siyam and Hylocereus undatus: Vietnam Jaina) grown in the Adana province located in the eastern Mediterranean region in Turkey. The individual sugars, antioxidant activity, total phenolic content, phenolic compounds and volatiles were determined for the first time in Turkey on two pitaya species. The results showed that total phenol content and antioxidant capacity are notably higher in red-fleshed fruits than white-fleshed ones and the predominant phenolic compound in fruits of both species was quercetin. The total sugar content and most of the phenolic compounds in fruits of two pitaya species were similar. A total of 51 volatile compounds were detected by using two Solid Phase Micro Extraction (SPME) fibers, coupled with Gas Chromatography Mass Spectrometry (GC-MS) techniques, and more volatile compounds were presented in the white-fleshed species. Total phenolic content (TPC) of the red-fleshed and white-fleshed pitaya species were 16.66 and 17.11 mg GAE/100 g FW (fresh weight). This study provides a first look at the biochemical comparison of red-fleshed and white-fleshed pitaya species introduced and cultivated in Turkey. The results also showed, for the first time, the biochemical content and the potential health benefit of Hylocereus grown in different agroecological conditions, providing important information for pitaya researchers and application perspective.     

Structural and Optical Properties of Zinc Nitride Films Prepared by Pulsed Filtered Cathodic Vacuum Arc Deposition

Polycrystalline zinc nitride films are deposited on Coming 7059 glass substrates by pulsed filtered cathodic vacuum arc deposition （PFCVAD）. The crystallographic structure is studied by means of x-ray diffraction. These measurements show that all the films are crystallized in the cubic structure, in a preferred orientation along the （332） and （631） directions. Weak XRD signal shows small crystallites distributed in an amorphous tissue. A small improvement of crystallinity is observed with annealing. Optical parameters such as absorption, energy band gap, Urbach tail, extinction coefficients have been determined. The Urbach tail energy is decreased with annealing at 500℃ for one hour. Energy band gap values are found to be increased by annealing.     

Effect of 0h11/2 Level on Shell Model Calculations of ^105Sb and ^107Sb

The full and reduced shell model calculations have been carried out for the light odd-even ^105Sb and ^107Sb isotopes. The model space has been chosen as 1d5/2, 0g7/2, 1d3/2, 2s1/2, and 0h11/2 for the full calculations and excluded 0h11/2 for the reduced calculations. The reduced shell model calculations of ^105Sb and ^107Sb isotopes are presented for the first time. We obtain the energy spectra for the ^105Sb and ^107Sb isotopes in the full and reduced model space by using CD-Bonn two-body effective nucleon-nucleon interaction. The resulting energy spectra are compared to the experimental results to understand the effect of the 0h11/2 level on the shell model calculations. We draw conclusions about the right model space in the shell model calculations for the isotopes around the N =Z= 50 region of the periodic table.     

Comparison of the band alignment of strained and strain-compensated GaInNAs QWs on GaAs and InP substrates

We present a comparison of the band alignment of the Ga_1−xIn_xN_yAs_1−y active layers on GaAs and InP substrates in the case of conventionally strained and strain-compensated quantum wells. Our calculated results present that the band alignment of the tensile-strained Ga_1−xIn_xN_yAs_1−y quantum wells on InP substrates is better than than that of the compressively strained Ga_1−xIn_xN_yAs_1−y quantum wells on GaAs substrates and both substrates provide deeper conduction wells. Therefore, tensile-strained Ga_1−xIn_xN_yAs_1−y quantum wells with In concentrations of x0.53 on InP substrates can be used safely from the band alignment point of view when TM polarisation is required. Our calculated results also confirm that strain compensation can be used to balance the strain in the well material and it improves especially the band alignment of dilute nitride Ga_1−xIn_xN_yAs_1−y active layers on GaAs substrates. Our calculations enlighten the intrinsic superiority of N-based lasers and offer the conventionally strained and strain-compensated Ga_1−xIn_xN_yAs_1−y laser system on GaAs and InP substrates as ideal candidates for high temperature operation.     

Uranium enrichment measurements using the intensity ratios of self-fluorescence X-rays to 92 keV gamma ray in UXKα spectral region

In this paper, the known multigroup γ-ray analysis method for uranium (MGAU) as one of the non-destructive γ-ray spectrometry methods has been applied to certified reference nuclear materials (depleted, natural and enriched uranium) containing ²³⁵U isotope in the range of 0.32-4.51% atom ²³⁵U. Its analysis gives incorrect results for the low component ²³⁵U in depleted and natural uranium samples where the build-up of the decay products begins to interfere with the analysis. The results reveal that the build-up of decay products seems to be significant and thus the algorithms for the presence of decay products should be improved to resulting in the correct enrichment value. For instance, for the case of ²³⁵U analysis in depleted uranium or natural ore samples, self-induced X-rays such as 94.6 keV and 98.4 keV lying in UXK_α spectral region used by MGAU can be excluded from the calculation. Because the significant increases have been observed in the intensities of uranium self-induced X-rays due to γ-ray emissions with above 100 keV energy arising from decay products of ²³⁸U and ²³⁵U and these parents. Instead, the use of calibration curve to be made between the intensity ratios of self-fluorescence X-rays to 92^* keV γ-ray and the certified ²³⁵U abundances is suggested for the determination of ²³⁵U when higher amounts of decay products are detected in the γ-ray spectrum acquired for the MGAU analysis.     

Quantitative analysis of ezetimibe in human plasma by gas chromatography‐mass spectrometry

A new, specific and sensitive GC‐MS method with electron impact ionization technique was developed for quantitative analysis of ezetimibe (EZE) in human plasma. Prior to GC analysis, EZE was derivatized with N‐methyl‐N‐trimethylsilyl‐trifluoroacetamide (MSTFA), which is a trimethyl silylating reagent. The derivatization reaction was optimized and parameters such as catalyst, derivatization time, temperature, solvent and the volume of silylating reagent were investigated. Trimethylsilyl ether derivative of EZE was determined in selected ion monitoring (SIM, mass‐to‐charge ratio (m/z): 326) mode. The method was validated with respect to LOD and LOQ, precision, accuracy, linearity, specificity, stability, and recovery. The LOQ and LOD were found as 15 and 10 ng/mL, respectively. The linearity of the method ranged from 15 to 250 ng/mL. The correlation coefficient of the calibration curve was 0.9977 ± 0.0004 (± S.E.M.). The intra‐ and inter‐day precisions (RSD) were less than 6% and accuracies (bias) for intra‐ and inter‐day accuracy were found between –4.04 and 9.71% at four different concentration levels (15, 40, 100, 250 ng/mL). The proposed method was successfully applied to real human plasma samples for determination of total EZE.     

La3Ni2O6: a new double T'-type nickelate with infinite Ni1+/2+O2 layers

New mixed-valent, Ni1+/Ni2+, metastable nickelate, La3Ni2O6, was synthesized by low-temperature reduction of La3Ni2O7 with CaH2. The crystal structure of La3Ni2O6 (space group: I4/mmm, a = 3.9686(1) A and c = 19.3154(6) A) was determined from powder neutron diffraction data by Rietveld analysis. The structure can be described as an intergrowth of LaO2 fluorite and double infinite layer (LaNiO2)2 blocks and represents the n = 2 homologue of the T'-type series Lan+1NinO2n+2. Such double T'-type structural arrangement has never been observed before. The 3d9/3d8 electronic configuration of Ni1+/Ni2+ and the presence of NiO2 infinite layers resemble electronic and structural features of the superconducting cuprates. X-ray absorption spectroscopy supports the 1+/2+ oxidation state and planar coordination of Ni in agreement with the structure determination.