Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Existence of positive solutions for nonlinear three-point problems on time scales

In this paper, by using fixed point theorems in cones, we study the existence of at least one, two and three positive solutions of a nonlinear second-order three-point boundary value problem for dynamic equations on time scales. As an application, we also give some examples to demonstrate our results.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Functionalization of saturated hydrocarbons. High temperature bromination of octahydropentalene. Part 19

The synthesis and thermal bromination of octahydropentalene was studied. The reaction afforded 1a,3a,4b,6b-tetrabromo-1,2,3,4,5,6-hexahydropentalene (14) with remarkable regio- and stereospecificity. The structure of the product was determined by ¹H and ¹³C NMR data and single X-ray structural analysis. The treatment of octahydropentalene with tenfold bromine gave the octabromopentalene derivative. The formation mechanism of the products is discussed.     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

Binuclear and mononuclear cobalt(II), nickel(II) and copper(II) complexes of 4,4′-bis(alkylaminoisonitrosoacetyl)diphenyl-methane derivatives

4,4-Bis(chloroacetyl)diphenylmethane has been prepared from ClCH₂COCl and Ph₂CH₂. 4,4-Methylenebis(phenylglyoxylohydroximoyl chloride has also been obtained. Four new substituted 4,4-bis(alkylaminoisonitrosoacetyl)diphenylmethanes (ligands) have been prepared from 4,4-methylenebis(phenylglyoxylohydroximoyl chloride) and the corresponding amines. The Ni^II, Cu^II and Co^II complexes of these ligands were prepared and their structures were identified using AAS, i.r., ¹H-n.m.r. spectral data, elemental analyses and magnetic susceptibility measurements.     

A novel (E,E)-dioxime and its mono-, di- and trinuclear complexes bearing tetradentate octyl sulfanyl phenylamino substituents. Synthesis,characterization and electrochemical properties of its transition metal complexes

A new vic-dioxime, 13,14-bis-(hydroxyimino)-9,12,15,18-diazadithiaoctacosane, has been synthesized from 2-octylsulfanylaminobenzene and (E,E)-dichloroglyoxime. Mononuclear transition metal complexes of Ni^II, Cu^II, Co^II and Fe^II have been prepared and were found to have a metal–ligand ratio of 1:2. The synthesis of di- and trinuclear complexes was achieved with U^IVO₂ and Cu^II depending on the stoichiometry of the reactants. The complexes were characterized by elemental analysis, ¹H-n.m.r., u.v.–vis, i.r., f.a.b.-m.s. and by cyclic voltammetry.     

Phenolic compounds from the aerial parts of Clematis viticella L. and their in vitro anti-inflammatory activities*

Phytochemical investigations on the EtOH extract of Clematis viticella led to the isolation of six flavonoid glycosides, isoorientin (1), isoorientin 3′-O-methyl ether (2), quercetin 7-O-α-L-rhamnopyranoside (3), quercetin 3,7-di-O-α-L-rhamnopyranoside (4), manghaslin (5) and chrysoeriol 7-O-β-D-glucopyranoside (6), one phenylethanol derivative, hydroxytyrosol (7), along with three phenolic acids, caffeic acid (8), (E)-p-coumaric acid (9) and p-hydroxybenzoic acid (10). The structures of the isolates were elucidated on the basis of NMR and HR-MS data. All compounds were isolated from C. viticella for the first time. Compounds 7 and 8 showed significant anti-inflammatory activity at 100 μM by reducing the release of NO in LPS-stimulated macrophages comparable to positive control indomethacin. Compounds 3 and 7 exhibited anti-inflammatory activity through lowering the levels of TNF-α while 1, 3 and 5 decreased the levels of neopterin better than the positive controls.     

Die Sechseck-n-Waben in der Ebene,welche von n Kreisbüscheln erzeugt werden

In this paper, the problem of determining the pencils of circles which form a hexagonal n-web in E₂, is completely solved. It is well-known that n pencils of circles orthogonal to a fixed circle form a hexagonal n-web. Therefore, the main problem is the determination of all circle pencils which form a hexagonal n-web and which do not cut a fixed circle orthogonally. In this connection the following results have been obtained: The number of hexagonal 4-webs is six, whereas the number of hexagonal 5-webs is two.Finally, after having proved that the number of hexagonal 6-webs is one, it is shown that, for n7, there exist no circle pencils forming a hexagonal n-web without being orthogonal to a fixed circle.