Sensitive determination of traces of boron in waters,fertilizers na geological and biological materials by isotope-dilution mass spectrometry

A method is described for determining traces of boron in water, fertilizers, geological and biological (reference) materials by isotope-dilution mass spectrometry after separation on an Amberlite IRA-743 borate-selective ion-exchange column. Boron (–250 ng g^?1) in water can be determined with an accuracy of 5–20% (computed on a 2s basis). After correction for weighing errors and for moisture, content, which varied from 0 to 8% for the samples tested, 1–35 μg g^?1 boron in “dry” fertilizer, biological or geological sample can be assayed with an accuracy of 5–30% (2s). In an IAEA interlaboratory program on a simulated fresh water, the method yielded a value of 24.3 +? 2 μg l^?1, compared to the make-up value of 25 μg l^?1.     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

On‐Line Monitoring of Chemical Reactions by using Bench‐Top Nuclear Magnetic Resonance Spectroscopy

Real‐time nuclear magnetic resonance (NMR) spectroscopy measurements carried out with a bench‐top system installed next to the reactor inside the fume hood of the chemistry laboratory are presented. To test the system for on‐line monitoring, a transfer hydrogenation reaction was studied by continuously pumping the reaction mixture from the reactor to the magnet and back in a closed loop. In addition to improving the time resolution provided by standard sampling methods, the use of such a flow setup eliminates the need for sample preparation. Owing to the progress in terms of field homogeneity and sensitivity now available with compact NMR spectrometers, small molecules dissolved at concentrations on the order of 1 mmol L^?1 can be characterized in single‐scan measurements with 1 Hz resolution. Owing to the reduced field strength of compact low‐field systems compared to that of conventional high‐field magnets, the overlap in the spectrum of different NMR signals is a typical situation. The data processing required to obtain concentrations in the presence of signal overlap are discussed in detail, methods such as plain integration and line‐fitting approaches are compared, and the accuracy of each method is determined. The kinetic rates measured for different catalytic concentrations show good agreement with those obtained with gas chromatography as a reference analytical method. Finally, as the measurements are performed under continuous flow conditions, the experimental setup and the flow parameters are optimized to maximize time resolution and signal‐to‐noise ratio.     

A simple non-perturbative approach of atom ionisation by intense and ultra-short laser pulses

A simple theoretical approach based on Coulomb-Volkov states is introduced to predict ionisation of atoms by intense laser pulses in cases where the effective interaction time does not exceed one or two optical cycles [M. Nisoli et al., Opt. Lett. 22, 522 (1997)]. Under these conditions, the energy distributions of ejected electrons predicted by this non-perturbative approach are in very good agreement with “exact" results obtained by a full numerical treatment. The agreement is all the better that the principal quantum number of the initial state is high. For very strong fields, most electrons are ejected at an energy which is close to the classical kinetic energy that would be transferred to free electrons by the electromagnetic field during the pulse. The power of the present approach appears when keV. In this region, full numerical treatments become very lengthy and finally do not converge. However, the present Coulomb-Volkov theory still makes reliable predictions in very short computer times. Received 19 November 1999 and Received in final form 19 January 2000     

Reversible coordinative chain transfer polymerization of styrene by rare earth borohydrides,chlorides/dialkylmagnesium systems

The ability of various rare earth borohydride and chloride complexes/n‐butylethylmagnesium systems to operate styrene chain transfer polymerization in mild conditions has been assessed. Thirteen precatalysts have been considered: the rare earth trisborohydrides Ln(BH₄)₃(THF)_x (x = 3, Ln = Nd (1), La (2), Sm (3), x = 2, Ln = Y (4), Sc (5)), the rare earth chlorides LnCl₃(THF)_x (x = 3, Ln = Nd (6), La (7), Sm (8), Y (9), x = 2, Ln = Sc (10)), the mixed La(BH₄)₂Cl(THF)_2.6 (11) and the half‐lanthanidocenes Cp*Ln(BH₄)₂(THF)₂ (Ln = Nd (12), La (13)). Six systems were found to be active precatalysts for the polymerization of styrene. 1 , 2 , and 11 led to an efficient transmetalation of the growing polystyrene chain with the simultaneous occurrence of βH elimination, whereas 7 , 12 , and 13 led to catalyzed chain growth behavior. It is noteworthy that the catalyzed chain growth obtained with 12 and 13 occurs with significant stereoselectivity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 802–814, 2010