Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).     

A simple method for the preparation of colloidal polymer-supported silver nanoparticles

Polysulfone?silver composite nanoparticles have been prepared by combining polymer nanoprecipitation and redox synthesis of silver, in the presence of a glucose-modified cyclosiloxane as stabilizing agent. Based on previous kinetic investigations and on model reactions, we concluded that the reducing agent in this case is the tetrahydrofuran (THF) used as solvent for polysulfone. Dynamic light scattering measurements on the obtained polymer-silver composite particles indicated particle average diameter of 176 nm with a polydispersity index of 0.25. The UV–vis spectrum exhibited the silver plasmon resonance. By different microscopic methods (atomic force microscopy—AFM, high resolution transmission electron microscopy—HRTEM, and scanning electron microscopy—SEM), larger polymer particles coated with silver nanoprticles were observed. The Energy Dispersive X-Ray analysis—EDX; confirmed the presence of Ag on the surface of the particles, while the selected area electron diffraction showed single crystalline silver nanospheres with face-centered cubic structure.     

New PP/PLA/cellulose composites: effect of cellulose functionalization on accelerated weathering behavior (accelerated weathering behavior of new PP/PLA/cellulose composites)

Polylactic acid (PLA) was used as partial replacement for conventional thermoplastic matrix, new composites comprising cellulose, polypropylene (PP), and PLA being realized. In order to obtain a compatible interface between cellulosic pulp and polymeric matrix, two chemical modifications of cellulose with stearoyl chloride and toluene di‐isocyanate (TDI) were performed, structural changes being evidenced by X‐ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The composite materials were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic scanning calorimetry, impact, tensile and melt rheological tests, surface tension, and dynamic vapor sorption. Because promising results for impact strength and Young modulus were recorded when replacing 15% of PP with PLA in blends of PP with the same cellulosic pulp load, the aim of our study was to assess the behavior to accelerate weathering of composites comprising PP, cellulosic pulp, and PLA. Although the slight decrease in the mechanical properties was recorded after accelerated weathering, the use of functionalized cellulose successfully prevented the deterioration of surface materials, especially for composite comprising stearoyl chloride treated cellulose pulp. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.     

DNA-assisted decoration of single-walled carbon nanotubes with gold nanoparticles for applications in surface-enhanced Raman scattering imaging of cells

Single-walled carbon nanotubes (SWNTs) are 1D nanostructures with distinct physical and chemical properties that have shown great promise for applications in many fields, including biomedicine. Since for biomedical application the water solubility is crucial and SWNTs have low solubility, various methods (including polymer and biopolymer wrapping, chemical modifications) have been developed to solubilize and disperse them in water. Due to their unique optical properties such as photoluminescence in the NIR and strong resonant Raman signatures, they can be used as nanoprobes in biomedical imaging and phototherapies. Furthermore, decoration of SWNTs with noble metal nanoparticles will induce an excellent surface-enhanced Raman scattering (SERS) effect of the nanoparticles-SWNTs composites, with applications in cell imaging. Herein, we present a new and facile strategy for the DNA-assisted decoration of SWNTs with gold nanoparticles (AuNPs) and their application in SERS imaging. By ultrasonication at room temperature of SWNTs with AuNPs functionalized with synthetic DNA, SWNT-AuNPs nanocomposites with enhanced Raman signal were obtained. Among the important advantages of the proposed method are the presence of the free DNA overhangs around the SWNT-AuNPs suitable for post-synthetic modification of nanocomposite through hybridization of complementary DNA strands containing molecules of interest attached by well-developed bio-conjugation chemistry.

Open image in new window

Graphical abstract ?

     

Heat‐treatment influence on the microstructure and magnetic properties of rare‐earth substituted SrFe12O19

Rare‐earth substituted strontium ferrite nanopowders SrFe_12‐xR_xO₁₉ (R = La, Gd and Er; x = 0.2, 0.5 and 1) were prepared by sol‐gel‐autocombustion method and subsequent heat treatments. Structural and magnetic properties of SrFe_12‐xR_xO₁₉ powders heat treated at 800, 900 and 1000⁰C, for various times, were characterized with an X‐ray diffractometer, a vibrating sample magnetometer and a scanning electron microscope. The results of X‐ray diffraction measurements showed the M‐type hexagonal structure formation by heat treatments. Magnetic properties, such as specific saturation magnetization σ_s, specific remanent magnetization σ_r and coercivity H_c, as well as microstructure depend on the heat treatment conditions (temperature and time). The coercivity H_c exhibits a great increase after a critical heat treatment time. When the heat treatment time increases, one obtains an increase in H_c after a shorter heat treatment time. This jump of H_c was explained by a transition from the superparamagnetic state to normal state of the single domain nanoparticles. The occurrence of an agglomerated structure composed of magnetically interacting ultrafine crystallites also contributes to the increase of H_c.The heat treatment determines a reduced grain growth due to the internal stress generated by R ions. With increasing R content the σ_s and σ_r decrease due to the dissolution of R ions into the hexaferrite lattice. We believe that by selecting the time and temperature of the heat treatment, microstructure and magnetic properties suitable for magnetic recording media application can be obtained. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Amphiphilic azopolymers capable to generate photo-sensitive micelles

Amphiphilic macromolecular micelles are advantageous for drug delivery applications due to the decrease of side-effects, ease of screening drugs against degradation, long-term stability, targeted delivery and control of the amount of the released drug. A series of amphiphilic azo-polymers having a flexible or rigid main-chain were synthesized and characterized. The presence of chlorobenzyl side-groups allowed both the easy bonding of photo-sensitive or hydrophilic groups and good control of the degree of substitution. The chemical structure was confirmed by ¹H-NMR. The critical concentration of aggregation (CCA) was calculated using the fluorescence emission spectrum of pyrene. The interest was focused on a preliminary study concerning the disaggregation capacity of micelles under UV irradiation. The presence of micellar aggregates was confirmed by DLS and SEM and different organization of the amphiphilic polymers was evidenced depending on polymers concentration and polymers structure. In low polymer concentrations in water predominantly globular aggregates were formed. The increase in concentration increased the polydispersity index due to the fusion of micelles and formation of associates of globular aggregates, inter-micellar associates (clusters) and vesicles.      

Enhanced stability of a Prussian blue/sol-gel composite for electrochemical determination of hydrogen peroxide

We have prepared a sol–gel that incorporates Prussian Blue (PB) as a redox mediator. It is shown that the PB in the pores of the sol–gel retains its electrochemical activity and is protected from degradation at acidic and neutral pH values. TEM and EDX studies revealed the PB nanoparticles to possess a cubic crystal structure and to be well entrapped and uniformly dispersed in the pores of the matrix. The electrocatalytic activity of the materials toward hydrogen peroxide (H₂O₂) was studied by cyclic voltammetry and amperometry. The modified electrode displays good sensitivity for the electrocatalytic reduction of H₂O₂ both in acidic (pH 1.4) and neutral media. The sensor has a dynamic range from 3 to 210 μM of H₂O₂, and the detection limit is 0.6 μM (at an SNR of 3).

Phyto-Functionalized Silver Nanoparticles Derived from Conifer Bark Extracts and Evaluation of Their Antimicrobial and Cytogenotoxic Effects

Silver nanoparticles synthesized using plant extracts as reducing and capping agents showed various biological activities. In the present study, colloidal silver nanoparticle solutions were produced from the aqueous extracts of Picea abies and Pinus nigra bark. The phenolic profile of bark extracts was analyzed by liquid chromatography coupled to mass spectrometry. The synthesis of silver nanoparticles was monitored using UV-Vis spectroscopy by measuring the Surface Plasmon Resonance band. Silver nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, Raman spectroscopy, dynamic light scattering, scanning electron microscopy, energy dispersive X-ray and transmission electron microscopy analyses. The antimicrobial and cytogenotoxic effects of silver nanoparticles were evaluated by disk diffusion and Allium cepa assays, respectively. Picea abies and Pinus nigra bark extract derived silver nanoparticles were spherical (mean hydrodynamic diameters of 78.48 and 77.66 nm, respectively) and well dispersed, having a narrow particle size distribution (polydispersity index values of 0.334 and 0.224, respectively) and good stability (zeta potential values of −10.8 and −14.6 mV, respectively). Silver nanoparticles showed stronger antibacterial, antifungal, and antimitotic effects than the bark extracts used for their synthesis. Silver nanoparticles obtained in the present study are promising candidates for the development of novel formulations with various therapeutic applications.     

Cellulose derivative/barium titanate composites with high refractive index,conductivity and energy density

Cellulose - This work deals with hydroxypropyl cellulose (HPC)/barium titanate (BT) composites, having small levels of perovskite-like BT loading, i.e. 0.5–2% and being designed for electric...