A covariant quasipotential operator for a composite system of two scaler particles

A quasipotential operator for a system of two scalar particles, and also an integral equation and a normalization condition for the wave function of the connected state, are obtained by the method of two-time Green's functions in an explicitly covariant form. The cases are considered of scalar and electromagnetic interactions of particles of the system.Frantsiska Skoriny Gomel' State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 112–118, June, 1993.     

The thermal decomposition of NaHCO3 powders and single crystals

The thermal decomposition of four commercial powders and of differently stored single crystals of sodium hydrogen carbonate is studied by power compensation DSC and by optical and FT-IR microscopy. Independently of manufacturer, specified purity and price, the thermal curves of all the commercial powders show a more or less pronounced low temperature peak preceding the one due to the main decomposition. Such small peak is not observed when samples of laboratory recrystallized material are used. However the thermal behaviour of the latter preparation differs remarkably depending on storage conditions: the material kept in closed glass containers decomposes at temperatures higher than those of the material stored in a dessiccator in the presence of concentrated H₂SO₄. The observation by optical microscopy of the behaviour of the surfaces of single crystals coming from different storage conditions when the temperature is raised in a Kofler heater helps the interpretation of the data collected. The mechanism of the decomposition is discussed and the relevant kinetic parameters reported.     

Combined charge and spin density experimental study of the yttrium(III) semiquinonato complex Y(HBPz3)2(DTBSQ) and DFT calculations

High-resolution X-ray diffraction and polarized neutron diffraction experiments have been performed on the Y-semiquinonate complex, Y(HBPz3)2(DTBSQ), in order to determine the charge and spin densities in the paramagnetic ground state, S = (1/2). The aim of these combined studies is to bring new insights to the antiferromagnetic coupling mechanism between the semiquinonate radical and the rare earth ion in the isomorphous Gd(HBPz3)2(DTBSQ) complex. The experimental charge density at 106 K yields detailed information about the bonding between the Y3+ ion and the semiquinonate ligand; the topological charge of the yttrium atom indicates a transfer of about 1.5 electrons from the radical toward the Y3+ ion in the complex, in agreement with DFT calculations. The electron density deformation map reveals well-resolved oxygen lone pairs with one lobe polarized toward the yttrium atom. The determination of the induced spin density at 1.9 K under an applied magnetic field of 9.5 T permits the visualization of the delocalized magnetic orbital of the radical throughout the entire molecule. The spin is mainly distributed on the oxygen atoms [O1 (0.12(1) mu B), O2(0.11(1) mu B)] and the carbon atoms [C21 (0.24(1) mu B), C22(0.20(1) mu B), C24(0.16(1) mu B), C25(0.12(1) mu B)] of the carbonyl ring. A significant spin delocalization on the yttrium site of 0.08(2) mu B is observed, proving that a direct overlap with the radical magnetic orbital can occur at the rare earth site and lead to antiferromagnetic coupling. The DFT calculations are in good quantitative agreement with the experimental charge density results, but they underestimate the spin delocalization of the oxygen toward the yttrium and the carbon atoms of the carbonyl ring.     

Mass displacements in quadrupolar field analysers

The influence of different instrumental parameters on the mass displacements observed in an ion trap and a quadrupole mass filter was investigated. In ion trap measurements it was observed that isolated ions (obtained by both ‘apex’ and ‘two-step’ isolation methods) show the same mass displacements determined in the usual mass spectra; isobaric ions of different structure irradiated with supplementary a.c. fields are ejected at different a.c. voltages, and different cooling times do not affect the mass value. In the quadrupole mass filter, differences in mass were found among isobaric ions of different structure, although to a smaller extent than those observed in the ion trap. All the data obtained are in agreement with the hypothesis of ion–r.f. field interactions originating from the polarizability of the ion.     

Skin-photosensitizing properties of Zn(II)-2(3), 9(10), 16(17), 23(24)-tetrakis-(4-oxy-N-methylpiperidinyl) phthalocyanine topically administered to mice

A Zn-phthalocyanine derivative bearing four 4-oxy-N-methyl-piperidinyl peripheral substituents has been formulated in an azone-containing gel for topical administration and its potential as a photodynamic therapy agent has been investigated. The phthalocyanine displays an intense absorbance in the 680 nm range and shows a high photosensitizing activity toward a model biological substrate (N-acetyl-L-tryptophanamide). Upon administration of 20 microg cm(-2) onto the dorsal skin of Balb/c mice, maximal phthalocyanine concentrations (ca. 64.2 ng mg(-1) of skin) are reached at 1 h after the deposition. The photosensitizer appears to be localized in the epidermal layers, since (a) no detectable amounts of phthalocyanine are recovered from the mouse blood and liver; and (b) upon photoactivation with a diode laser at 675 nm, only the epidermis is heavily damaged, as shown by histological and ultrastructural analysis. The photodamage is largely of inflammatory nature and an essentially complete healing of the damaged skin is observed at 72 h after the end of the phototreatment. The minimal phototoxic dose for 20 microg cm(-2) photosensitizer and 675 nm irradiation is found to be (150 mW cm(-2)-120 J cm(-2)) or (180 mW cm(-2)-100 J cm(-2)).     

Pressure- and temperature-induced valence tautomeric interconversion in a o-dioxolene adduct of a cobalt-tetraazamacrocycle complex

An electronic switch at the molecular level has been realized by using a class of ionic compounds of the formula [Co(L)(diox)]Y (L = tetraazamacrocyclic ligand, Y = mononegative anion). Such compounds undergo temperature- and pressure-induced intramolecular one-electron transfer equilibria. The transition temperature of interconversion varies with the nature of the counterions Y (Y = PF6, BPh4, I). Surprisingly the effect of the anion on the transition temperature is not only governed by its volume but also by its coulombic interaction.     

Crystal and molecular structure and magnetic exchange properties of bis(di-micro-ethoxo-bis(3,5-di-tert-butylsemiquinonato)dicopper(II)) complex. A synergy between DFT and experimental magnetochemistry

The compound bis(di-micro-ethoxo-bis(3,5-di-tert-butylsemiquinonato)dicopper(II)) has been synthesized and its structure was determined by single-crystal X-ray diffraction. The compound crystallizes in the monoclinic system, space group C2/c, with a = 37.736(8) A, b = 9.173(2) A, c = 23.270(5) A, beta = 122.24(3) degrees. The structure can be described as a Lewis adduct between two dinuclear [Cu(DBSQ)(C(2)H(5)O)](2) units (DBSQ = 3,5-di-tert-butyl-semiquinonato). The temperature dependence of the magnetic susceptibility was efficiently analyzed by a combined DFT/experimental approach, showing that a rather strong ferromagnetic interaction exists between the DBSQ(-) and the copper(II) ions modulated by an antiferromagnetic interaction between the two copper(II) ions of the dinuclear units. Weak antiferromagnetism between the two units in the unit cell was measured.     

Mechanochemical Synthesis of Fluorinated Imines

A number of imines, including 12 new compounds, previously not reported in the literature, derived from variously fluorinated benzaldehydes and different anilines or chiral benzylamines were synthesized by a solvent-free mechanochemical method, which was based on the manual grinding of equimolar amounts of the substrates at the room temperature. In a very short reaction time of only 15 min, the method produced the expected products with good-to-excellent yields. The yields were comparable or significantly higher than those reported in the literature for the imines synthesized by other methods. Importantly, the conditions used for the reactions with aniline derivatives also resulted in the high yields of imines obtained from chiral benzylamines, and can be extended to the synthesis with other similar amines. Structures of all imines were confirmed by NMR spectroscopy: ¹H, ¹³C and ¹⁹F. For four compounds, X-ray structures were also obtained. The synthetic approach presented in this paper contributes to the prevention of environmental pollution and can be easily extended for larger-scale syntheses. The mechanochemical solvent-free method provides a convenient strategy particularly useful for the preparation of fluorinated imines being versatile intermediates or starting material in the synthesis of drugs and other fine chemicals.     

Synthesis and reversible hydration–dehydration system of copolymers bearing a vicinal tricarbonyl structure

Novel copolymers composed of a styrene (St) derivative bearing a vicinal tricarbonyl moiety and various vinyl monomers such as St, methyl methacrylate (MMA), and N‐vinylpyrrolidone (NVP) were synthesized by (1) radical copolymerization of a St derivative with a 1,3‐diketone structure with St, MMA, and NVP and (2) successive oxidation of the resulting copolymers with N‐bromosuccinimide in DMSO to convert their 1,3‐diketone moieties in the side chains into the corresponding vicinal tricarbonyl moieties. Their tricarbonyl moieties were readily hydrated in water‐containing acetone to generate the corresponding copolymers bearing geminal diol structures in the side chains. On the other hand, heating the resulting copolymers bearing the geminal diol structures in vacuo‐enabled successful recovery of the vicinal tricarbonyl moieties to demonstrate the reversible nature of this system. The hydration behavior in powdery state under air atmosphere saturated by water was also investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012