A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%).     

High-Pressure,High-Resolution Nuclear Magnetic Resonance (HPHR-NMR.): A Tool in Chemical Kinetics

In recent years the volume of activation Δ V* has become a powerful tool in chemical kinetics. High resolution NMR. spectroscopy is now one of the most common techniques used in the study of the kinetics of labile chemical systems. In order to measure Δ V* by this technique, we have built a ¹H-probe-head, for a Fourier transform spectrometer, working up to 4 kbar and with a resolution of 0.6 Hz. The temperature is regulated and measured with an accuracy better than 0.2°. The high pressure probe-head has been tested on a chemical system showing a dissociative-associative crossover for the ligand substitution mechanism. It had been shown previously that the ligand exchange TaBr₅ · L + *L ? TaBr₅ · *L + L proceeds via a D mechanism when L=Me₂O, and via an I_a mechanism when L=Me₂S. As expected, ΔV is positive (+30.5 ± 2.0 cm³ mol^?1) for the dissociative process and negative (?12.6 ± 1.0 cm³ mol^?1) for the associative one.     

Nucleophilic additions of lithiated allylphenylsulfone to nitrones: experimental and theoretical investigations

The nucleophilic addition of lithiated allylphenylsulfone to nitrones at −80 °C proceeds exclusively α to the phenylsulfonyl group affording anti adducts in high yield. At 0 °C isoxazolidines are obtained with complete all-trans selectivity. The formation of these compounds involves isomerization of the allylsulphonyl moiety to give a transient vinylsulfone that then undergoes a subsequent intramolecular Michael addition. The addition to several nitrones has been studied and theoretical calculations have been refined to accurately explain the selectivity of the allylation reaction.     

Modified micellar electrokinetic chromatography in the analysis of catechins and xanthines in chocolate

Modified micellar electrokinetic chromatography (MEKC) analysis of monomeric flavanols (catechin and epicatechin) and methylxanthines (caffeine and theobromine) in chocolate and cocoa was performed by using sodium dodecyl sulfate (SDS) as a principal component of the running buffer. Because of the reported poor stability of catechins in alkaline solutions, acidic conditions (pH 2.5) were chosen and consequently the electroosmotic flow (EOF) was significantly suppressed; this resulted in a fast anodic migration of the analytes partitioned into the SDS micelles. Under these conditions, variations of either pH value in acidic range or SDS concentration, showed to be not suitable to modulate the selectivity. To overcome this limit, use of additives to the SDS-based running buffer was successfully applied and three different systems were optimized for the separation of (+)-catechin, (-)-epicatechin, caffeine, and theobromine in chocolate and cocoa powder samples. In particular, two mixed micelle systems were applied; the first consisted of a mixture of SDS and 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate (CHAPS) with a composition of 90 mM and 10 mM, respectively; the second was SDS and taurodeoxycholic acid sodium salt (TDC) with a composition of 70 mM and 30 mM, respectively. A further MEKC approach was developed by addition of 10 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to the SDS solution (90 mM); it provided a useful cyclodextrin(CD)-modified MEKC. By applying the optimized conditions, different separation profiles of the flavanols and methylxanthines were obtained showing interesting potential of these combined systems; their integrated application showed to be useful for the identification of the low level of (+)-catechin in certain real samples. The CD-MEKC approach was validated and applied to the determination of catechins and methylxanthines in aqueous extracts from four different commercial chocolate types (black and milk) and two cocoa powders.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997     

Study of donepezil binding to serum albumin by capillary electrophoresis and circular dichroism

The interaction between human serum albumin (HSA) and the acetylcholinesterase inhibitor donepezil, has been studied by means of capillary electrophoresis frontal analysis (CE/FA) and circular dichroism. CE/FA enabled rapid and direct estimation of the quantity of free donepezil present at equilibrium with a physiological level of serum albumin (600 mol L^–1). Application of Scatchard analysis enabled estimation of the binding parameters of HSA towards donepezil, such as association constant and number of binding sites on one protein molecule. Furthermore, due to enantioseparation ability shown by HSA on donepezil in CE mode, displacement experiments were carried out using ketoprofen and warfarin as coadditives to the HSA based running buffer. The addition of these compounds reduced the enantioresolution of donepezil by HSA only when used at high concentration. These data were confirmed and corroborated by circular dichroism (CD) experiments. Using CD, bilirubin was also applied as a ligand specific to site III of HSA. The observed behaviour suggested that donepezil could be considered a ligand with independent binding to sites I and II; although site III is not the highest affinity site, indirect interaction (i.e. cooperative binding) can be assumed.     

Vibration reduction in a flexible-link mechanism through synthesis of an optimal controller

In this paper, reduction of vibration of a flexible planar mechanism is achieved through synthesis of an optimal controller. A finite element model, based on the equivalent rigid-link system theory, is used to accurately describe the dynamic behavior of the system. The model, which accounts for geometric and inertial nonlinearities of the mechanism, has been fully validated through experimental tests. In order to be able to employ the classical optimal control theory, a suitable linear model has been derived from the original one by means of a suitable linearization procedure. Vibration reduction can then be obtained by first defining an adequate performance index, which accounts for vibration amplitude, then by solving Riccati’s equation in order to find the controller that minimizes the performance index, i.e. the optimal controller. The results of several tests that have been carried out are also reported, to show the effectiveness of the synthesized control system.     

Hydrodynamic forces and critical stresses in low-density aggregates under shear flow

The distribution of stresses in rigid colloidal aggregates under a shear flow was investigated numerically for particle-cluster and cluster-cluster aggregates with fractal dimensions ranging from 1.7 to 2.3. stokesian dynamics was used to calculate the hydrodynamic force on each monomer, while the internal intermonomer interactions were calculated by applying force and torque balances on each primary particle. Although the hydrodynamic forces act mainly on the periphery of the clusters, their filamentous structure propagates and accumulates internal stresses toward the inner region of the aggregates, where consequently the most loaded intermonomer bonds are located. The spatial stress distribution, when scaled by the proper power of the radius of gyration, is independent of aggregate size and fractal dimension. This feature has made it possible to identify the most probable locations of bond failure in the structure and to estimate the relationship between shear rate and particle size for the occurrence of restructuring and of breakage.     

Analysis of a low-power CO2 laser performance as a function of gas flow rate

The performance of a flowing gas CO₂ laser is analysed and compared with a theoretical model which takes into account the gas flow rate and the CO₂ decomposition. Particular attention has been devoted to the characteristics of slow gas flow as a function of the gas mixture composition.