Temperature-dependent behavior of a symmetric long-chain bolaamphiphile with phosphocholine headgroups in water: from hydrogel to nanoparticles

The temperature-dependent self-assembly of the single-chain bolaamphiphile dotriacontan-1,1'-diyl-bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray scattering, rheological measurements, and dynamic light scattering (DLS). At room temperature this compound, in which two phosphocholine headgroups are connected by a C(32) alkyl chain, proved to be capable of gelling water very efficiently by forming a dense network of nanofibers (Kohler et al. Angew. Chem., Int. Ed. 2004, 43, 245). A specific feature of this self-assembly process is that it is not driven by hydrogen bonds but solely by hydrophobic interactions of the long alkyl chains. The nanofibers have a thickness of roughly the molecular length and show a helical superstructure. A model for the molecular structure of the fibrils which considers the extreme constitution of the bolaamphiphile is proposed. Upon heating the suspensions three different phase transitions can be detected. Above 49 degrees C, the temperature of the main transition where the alkyl chains become "fluid", a clear low-viscosity solution is obtained due to a breakdown of the fibrils into smaller aggregates. Through mechanical stress the gel structure can be destroyed as well, indicating a low stability of these fibers. The gel formation is reversible, but as a drastic rearrangement of the molecules takes place, metastable states occur.     

A thermobalance for high pressure process studies

A DuPont 950 TG has been modified to permit operation at up to 30 atm, 1100°C, with corrosive atmospheres, and steam partial pressures up to 20 atm.The major areas of instrument development included: weight and temperature measurement at high pressures in a dynamic flow system; modification of a TG to accept corrosive gas atmospheres containing high partial pressures of steam; design of a pressure balanced flow system for safe introduction of corrosive gas atmospheres; design of a working steam generation system for low flows.Process studies illustrating the utility of the high presure thermobalance include the cyclic CO₂-acceptor reaction for half-calcined dolomite

and the cyclic H₂S absorption and regeneration reaction for half-calcined dolomite

     

General Synthesis and Physicochemical Characterisation of a Series of Peptide‐Mimic Lysine‐Based Amino‐Functionalised Lipids

A series of novel malonic acid diamides (second generation) with two long hydrophobic alkyl chains and an alkaline polar head group was synthesised and characterised as a new class of amino‐functionalised lipids. These peptide‐mimic lipids are suitable for polynucleotide transfer. The lipids bear a novel backbone consisting of a lysine unit and a malonic acid unit. Six different head‐group structures, which vary in size and number of amino groups that can be protonated, were attached to the backbone structure. Furthermore, different alkyl chains were used to build the lipophilic part (namely tetradecyl, hexadecyl, and oleyl). Phase transitions of the new compounds in aqueous dispersions at pH 10 were analysed and discussed in terms of head group and alkyl chain variations. The shape and size of the formed aggregates of selected lipid dispersions were investigated by dynamic light scattering and transmission electron microscopy.     

Structure–Function Relationships of New Lipids Designed for DNA Transfection

Cationic liposome/DNA complexes can be used as nonviral vectors for direct delivery of DNA‐based biopharmaceuticals to damaged cells and tissues. To obtain more effective and safer liposome‐based gene transfection systems, two cationic lipids with identical head groups but different chain structures are investigated with respect to their in vitro gene‐transfer activity, their cell‐damaging characteristics, and their physicochemical properties. The gene‐transfer activities of the two lipids are very different. Differential scanning calorimetry and synchrotron small‐ and wide‐angle X‐ray scattering give valuable structural insight. A subgel‐like structure with high packing density and high phase‐transition temperature from gel to liquid‐crystalline state are found for lipid 7 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2,N‐bis(hexadecyl)propanediamide) containing two saturated chains. Additionally, an ordered head‐group lattice based on formation of a hydrogen‐bond network is present. In contrast, lipid 8 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2‐hexadecyl‐N‐[(9Z)‐octadec‐9‐enyl]propanediamide) with one unsaturated and one saturated chain shows a lower phase‐transition temperature and a reduced packing density. These properties enhance incorporation of the helper lipid cholesterol needed for gene transfection. Both lipids, either pure or in mixtures with cholesterol, form lamellar phases, which are preserved after addition of DNA. However, the system separates into phases containing DNA and phases without DNA. On increasing the temperature, DNA is released and only a lipid phase without intercalated DNA strands is observed. The conversion temperatures are very different in the two systems studied. The important parameter seems to be the charge density of the lipid membranes, which is a result of different solubility of cholesterol in the two lipid membranes. Therefore, different binding affinities of the DNA to the lipid mixtures are achieved.     

Selective nucleophilic replacement of the benzylsulfanyl group in 2,4‐disulfanyl‐substituted thieno[2,3‐d]pyrimidin‐6‐carboxylic acid derivatives by secondary amines

Thieno[2,3‐d]pyrimidines with benzylsulfanyl and allylsulfanyl group in the presence of other alkylsul‐fanyl substituents react selectively under mild conditions with secondary amines under replacement of the benzyl or allyl residue whereas the other substituents remain intact. This enables the synthesis of different basic substituted derivatives with potentially biologically activity.     

Investigation of the protonation state of novel cationic lipids designed for gene transfection

In order to be used in versatile DNA delivery systems, novel cationic lipids were synthesized. The head groups of the new compounds represented by monoamines or oligoamines can be charged or uncharged depending on the environmental pH. Since their pK values are unknown, the protonation properties of these lipids have been studied in a wide pH range. In our experiments, the amphiphilic molecules were organized as a Langmuir monolayer at the air-water interface. Total reflection X-ray fluorescence (TRXF) was used to determine the 2D concentration of bromide counterions bound to a positively charged (protonated) Langmuir monolayer. The protonation rate of the novel cationic lipids was estimated by comparing the fluorescence intensity with that of dioctadecyldimethylammonium bromide monolayers as a reference. TRXF investigations were supplemented with results of film-balance measurements, grazing incidence X-ray diffraction, and X-ray reflectivity data. The results obtained display that the monolayers of all studied compounds are completely uncharged at pH values above 10. In the investigated pH region, the highest protonation rate of the monolayers is observed at pH 3. The influence of the monolayer packing density on the protonation properties is clearly shown.     

Physicochemical investigation of a lipid with a new core structure for gene transfection: 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol

Cationic liposomes/DNA complexes can be used as nonviral vectors for direct delivery of DNA-based biopharmaceuticals to damaged cells and tissues. In order to obtain more effective and safer liposome-based gene transfection systems, the new cationic lipid 2-amino-3-hexadecyloxy-2-(hexadecyloxymethyl)propan-1-ol (AHHP) was synthesized. In this paper we report on the synthesis of AHHP and investigations of its physical-chemical properties. Langmuir monolayers of AHHP were studied at the air/buffer interface by film balance measurements, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). Structure and thermotropic phase behavior of AHHP in aqueous dispersion were examined by small-angle and wide-angle X-ray scattering (SAXS/WAXS) and differential scanning calorimetry (DSC). The results show clear differences in structure and phase behavior of AHHP, both in the monolayer system and in aqueous dispersions, in dependence on the subphase pH due to protonation or deprotonation of the primary amine in the lipid head group. Thermodynamic data derived from pi-A isotherms provide information about the critical temperature (Tc), which is in rough agreement with the temperature of the lipid phase transition from gel to fluid state (Tm) found by X-ray and calorimetry studies of AHHP aqueous dispersions. The packing properties of the molecules in mono- and bilayer systems are very similar. DNA couples to the monolayer of the new lipid at low as well as at high pH but in different amounts. The DNA coupling leads to an alignment of adsorbed DNA strands indicated by the appearance of a Bragg peak. The distance between aligned DNA strands does not change much with increasing monolayer pressure.     

Bisabolane Derivatives from Leontopodium alpinum

From the roots of Leontopodium alpinum, four new bisabolane sesquiterpenoids, (1R*,2S*,4R*,5S*)‐4‐(acetyloxy)‐2‐[3‐(acetyloxy)‐1,5‐dimethylhex‐4‐enyl]‐5‐methylcyclohexyl (2Z)‐2‐methylbut‐2‐enoate ( 1 ), (1R*,4S*,6R*)‐4‐(acetyloxy)‐6‐[3‐(acetyloxy)‐1,5‐dimethylhex‐4‐enyl]‐3‐methylcyclohex‐2‐en‐1‐yl (2Z)‐2‐methylbut‐2‐enoate ( 2 ), and 3‐methyl‐1‐{2‐[(1R*,2R*,5R*,6S*)‐2,5,6‐tris(acetyloxy)‐4‐methylcyclohex‐3‐en‐1‐yl]propyl}but‐2‐enyl (2Z)‐2‐methylbut‐2‐enoate ( 3 and 4 ) have been isolated. The latter constituents differ from each other by the relative configurations of the chiral centers of the hexenyl side chain.