Radiometric observations of the 752.033-GHz rotational absorption line of H2O from a laboratory jet

The intensity and lineshape of the Doppler-broadened 752.033-GHz (2₁₁ 2₀₂) rotational transition of H₂O has been studied passively using a high-resolution two-stage heterodyne radiometer with single-sideband system noise temperature of 45,000 K. The purpose of the experiments was to demonstrate the observability at submillimeter wavelengths of a high-altitude rocket plume simulated by a laboratory H₂O jet in a vacuum chamber. First-stage mixing was accomplished by means of a GaAs Schottky diode with first local-oscillator power supplied by a CO₂-laser pumped formic-acid laser (761.61 GHz), generating and X-band IF signal. Second localoscillator power was provided by a tunable C-band source. One-MHz resolution capability was obtained by means of a 3-GHz waveguide cavity filter with only 9-dB insertion loss. In the H₂O jet experiments, the center frequency of the line was determined to within 1 MHz of the previously reported value. A rotational temperature 75 K, a linewidth 5 MHz, and a Doppler shift 3 MHz (from a 45-degree rotation of the flow direction) were measured with the line-of-sight intersecting the jet axis at a distance downstream of 30 nozzle diameters. These absorption data were ogtained against continuum background radiation sources at temperatures of 1175 and 300 K.     

Bonding, structure, and energetics of gaseous E8(2+) and of solid E8(AsF6)2 (E = S, Se)

The attempt to prepare hitherto unknown homopolyatomic cations of sulfur by the reaction of elemental sulfur with blue S8(AsF6)2 in liquid SO2/SO2ClF, led to red (in transmitted light) crystals identified crystallographically as S8(AsF6)2. The X-ray structure of this salt was redetermined with improved resolution and corrected for librational motion: monoclinic, space group P2(1)/c (No. 14), Z = 8, a = 14.986(2) A, b = 13.396(2) A, c = 16.351(2) A, beta = 108.12(1) degrees. The gas phase structures of E8(2+) and neutral E8 (E = S, Se) were examined by ab initio methods (B3PW91, MPW1PW91) leading to delta fH theta[S8(2+), g] = 2151 kJ/mol and delta fH theta[Se8(2+), g] = 2071 kJ/mol. The observed solid state structures of S8(2+) and Se8(2+) with the unusually long transannular bonds of 2.8-2.9 A were reproduced computationally for the first time, and the E8(2+) dications were shown to be unstable toward all stoichiometrically possible dissociation products En+ and/or E4(2+) [n = 2-7, exothermic by 21-207 kJ/mol (E = S), 6-151 kJ/mol (E = Se)]. Lattice potential energies of the hexafluoroarsenate salts of the latter cations were estimated showing that S8(AsF6)2 [Se8(AsF6)2] is lattice stabilized in the solid state relative to the corresponding AsF6- salts of the stoichiometrically possible dissociation products by at least 116 [204] kJ/mol. The fluoride ion affinity of AsF5(g) was calculated to be 430.5 +/- 5.5 kJ/mol [average B3PW91 and MPW1PW91 with the 6-311 + G(3df) basis set]. The experimental and calculated FT-Raman spectra of E8(AsF6)2 are in good agreement and show the presence of a cross ring vibration with an experimental (calculated, scaled) stretching frequency of 282 (292) cm-1 for S8(2+) and 130 (133) cm-1 for Se8(2+). An atoms in molecules analysis (AIM) of E8(2+) (E = S, Se) gave eight bond critical points between ring atoms and a ninth transannular (E3-E7) bond critical point, as well as three ring and one cage critical points. The cage bonding was supported by a natural bond orbital (NBO) analysis which showed, in addition to the E8 sigma-bonded framework, weak pi bonding around the ring as well as numerous other weak interactions, the strongest of which is the weak transannular E3-E7 [2.86 A (S8(2+), 2.91 A (Se8(2+)] bond. The positive charge is delocalized over all atoms, decreasing the Coulombic repulsion between positively charged atoms relative to that in the less stable S8-like exo-exo E8(2+) isomer. The overall geometry was accounted for by the Wade-Mingos rules, further supporting the case for cage bonding. The bonding in Te8(2+) is similar, but with a stronger transannular E3-E7 (E = Te) bonding. The bonding in E8(2+) (E = S, Se, Te) can also be understood in terms of a sigma-bonded E8 framework with additional bonding and charge delocalization occurring by a combination of transannular n pi *-n pi * (n = 3, 4, 5), and np2-->n sigma * bonding. The classically bonded S8(2+) (Se8(2+) dication containing a short transannular S(+)-S+ (Se(+)-Se+) bond of 2.20 (2.57) A is 29 (6) kJ/mol higher in energy than the observed structure in which the positive charge is delocalized over all eight chalcogen atoms.     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Experimental and Computational Study of the Thermal Decomposition of 3‐Methyl‐3‐buten‐1‐ol in m‐Xylene Solution

An experimental study of the thermal decomposition of a β‐hydroxy alkene, 3‐methyl‐3‐buten‐1‐ol, in m‐xylene solution, has been carried out at five different temperatures in the range of 513.15–563.15 K. The temperature dependence of the rate constants for the decomposition of this compound in the corresponding Arrhenius equation is given by ln k (s^?1) = (25.65 ± 1.52) ? (17,944 ± 814) (kJ·mol^?1)·T^?1. A computational study has been carried out at the M05–2X/6–31+G(d,p) level of theory to calculate the rate constants and the activation parameters by the classical transition state theory. There is a good agreement between the experimental and calculated rate constants and activation Gibbs energies. The bonding characteristics of reactant, transition state, and products have been investigated by the natural bond orbital analysis, which provides the natural atomic charges and the Wiberg bond indices. Based on the results obtained, the mechanism proposed is a one‐step process proceeding through a six‐membered cyclic transition state, being a concerted and slightly asynchronous process. The results have been compared with those obtained previously by us (Struct Chem 2013, 24, 1811–1816) for the thermal decomposition of 3‐buten‐1‐ol, in m‐xylene solution. We can conclude that in the compound studied in this work, 3‐methyl‐3‐buten‐1‐ol, the effect of substitution at position 3 by a weakly activating CH₃ group is the stabilization of the transition state formed in the reaction and therefore a small increase in the rate of thermal decomposition.     

Structural and Kinetic Aspects of Blood Plasma Protein Adsorption on the Surface of Hydrophobic Polymers

Abstract

Due to the wide use of polymers in medicine, researchers are required to solve a very important problem–to understand the interaction between materials of nonphysiological origin and the surrounding biological liquids, and tissues, particularly blood.     

Supporting disciplinary and interdisciplinary knowledge development and design thinking in an informal,pre‐engineering program: A Workplace Simulation Project

In this paper, we examined students’ engagement in an implementation of a Workplace Simulation Project (WSP). The WSP was designed to actively engage students in learning disciplinary content by inviting engineers from industry to have a physical presence within the school building to collaborate with teachers and students to complete projects which simulate the tasks authentic to their work. We focus on the first year implementation of the program that partnered a high school in the rural Midwest with an engineering unit of a government organization. Using a multiple methods study design, we analyzed disciplinary and interdisciplinary pre and posts test along with students’ interviews to determine learning gains as well as students’ interpretations of creative and critical thinking as experienced in the project and their knowledge of the engineering design process. Effect sizes showed that students in the WSP group had notable gains over the control group participants. Additionally, students’ knowledge of core elements of the design process were identified in inductive analyses of the interviews. Findings from this study will provide usable knowledge about effective ways to support systems and design thinking and ways to support expert‐novice collaboration to ensure success.