Ab-initio simulation of elastic constants for some ceramic materials

Athermal elasticity for some ceramic materials (α-Al₂O₃, SiC (α and β phases), TiO₂ (rutile and anatase), hexagonal AlN and TiB₂, cubic BN and CaF₂, and monoclinic ZrO₂) have been investigated via density functional theory. Energy-volume equation-of-state computations to obtain the zero pressure equilibrium volume and bulk modulus as well as computations of the full elastic constant tensor of these ceramics at the experimental zero pressure volume have been performed. The present results for the single crystal elasticity are in good agreement with experiments both for the aggregate properties (bulk and shear modulus) and the elastic anisotropy. In contrast, a considerable discrepancy for the zero pressure bulk modulus of some ceramics evaluated from the energy-volume fit to the computational zero pressure volume has been observed.     

Planar Chromatographic and Electrophoretic Study of Thermally Induced Conformational Modifications of Protein Structure

JPC – Journal of Planar Chromatography – Modern TLC -     

Mechanical, thermal and surface properties of polyacrylamide/dextran semi-interpenetrating network hydrogels tuned by the synthesis temperature

The mechanical, rheological, thermal, and surface behaviors of three polyacrylamide/dextran (PAAm/Dx) semi-interpenetrating polymer network (semi-IPN) hydrogels, prepared at 22°C, 5°C and ?18°C, were investigated. The results were compared with those obtained on cross-linked PAAm without Dx synthesized under the same conditions. Hydrogels prepared at the lowest temperature were the most mechanically stable. The thermal stability of the semi-IPN hydrogels is slightly lower than the corresponding PAAm gels, irrespective of preparation temperature. The water vapor sorption capacity depended on the presence of Dx as well as preparation temperature, which determines the network morphology.      

Study on metal complexes of chelating resins bearing iminodiacetate groups

Cu(II), Co(II) and Ni(II) complexes of chelating resins (CR) bearing iminodiacetate (IDA) ligands were prepared. The CR-metal complexes were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), thermal behavior (TG and DTG) under nitrogen atmosphere, and electron paramagnetic resonance (EPR). FT-IR spectra of the CR-metal complexes showed the characteristic bands of CR were still present but red-shifted after the metal complexation, and new bands assigned to Me-N bonds were observed. Thermal behavior of the metal-CR complexes supported the metal complexation, metal complexation leading to the decrease of the thermal stability of the CR, the lowest thermal stability being found when the highest amount of Cu(II) was loaded. Based on the EPR results and the thermal behavior of Cu(II)-CR complexes, the scheme for the complexation of Cu(II) on the CR was suggested.     

Measurement of the subcycle timing of attosecond XUV bursts in high-harmonic generation

The absolute timing of the high-harmonic attosecond pulse train with respect to the generating IR pump cycle has been measured for the first time. The attosecond pulses occur 190+/-20 as after each pump field maxima (twice per optical cycle), in agreement with the "short" quantum path of the quasiclassical model of harmonic generation.     

Population and coherence transfer induced by double frequency sweeps in half-integer quadrupolar spin systems

We have recently shown that the sensitivity of single- and multiple-quantum NMR experiments of half-integer (N/2) quadrupolar nuclei can be increased significantly by introducing so-called double frequency sweeps (DFS) in various pulse schemes. These sweeps consist of two sidebands generated by an amplitude modulation of the RF carrier. Using a time-dependent amplitude modulation the sidebands can be swept through a certain frequency range. Inspired by the work of Vega and Naor (J. Chem. Phys. 75, 75 (1981)), this is used to manipulate +/-(m - 1) <--> +/-m (3/2 < or = m < or = N/2) satellite transitions in half-integer spin systems simultaneously. For (23)Na (I = 3/2) and (27)Al (I = 5/2) spins in single crystals it proved possible to transfer the populations of the outer +/-m spin levels to the inner +/-1/2 spin levels. A detailed analysis shows that the efficiency of this process is a function of the adiabaticity with which the various spin transitions are passed during the sweep. In powders these sweep parameters have to be optimized to satisfy the appropriate conditions for a maximum of spins in the powder distribution. The effects of sweep rate, sweep range, and RF field strength are investigated both numerically and experimentally. Using a DFS as a preparation period leads to significantly enhanced central transition powder spectra under both static and MAS conditions, compared to single pulse excitation. DFSs prove to be very efficient tools not only for population transfer, but also for coherence transfer. This can be exploited for the multiple- to single-quantum transfer in MQMAS experiments. It is demonstrated, theoretically and experimentally, that DFSs are capable of transferring both quintuple-quantum and triple-quantum coherence into single-quantum coherence in I = 5/2 spin systems. This leads to a significant enhancement in signal-to-noise ratio and strongly reduces the RF power requirement compared to pulsed MQMAS experiments, thus extending their applicability. This is demonstrated by (27)Al 3QMAS experiments on 9Al(2)O(3). 2B(2)O(3) and the mineral andalusite. In the latter compound, Al experiences a quadrupolar-coupling constant of 15.3 MHz in one of the sites. Finally a 5QMAS spectrum on 9Al(2)O(3). 2B(2)O(3) demonstrates the sensitivity enhancement of this experiment using a double frequency sweep.     

1D to 3D NMR study of microporous alumino‐phosphate AlPO4‐40

From one‐ to two‐ and three‐dimensional MAS NMR solid‐state experiments involving ³¹P and ²⁷Al, we show that the structure of microporous alumino‐phosphate AlPO₄‐40 contains at least four times more sites than expected, and we attribute two types of Al_IV sites. The newly described ²⁷Al‐³¹P MQ‐HMQC opens new possibilities of describing details of three‐dimensional bounded networks. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).