Synthesis, structure, and kinetics and stereochemistry of base-catalyzed hydrolysis of meso- and rac-[Co2(tmpdtne)Cl2]4+, bis(pentaamine) complexes devoid of deprotonatable NH centers

The bis(pentadentate) ligand tmpdtne binds two Co(II) centers, and the entity is readily oxidized to the dicobalt(III) derivative [Co(2)(tmpdtne)Cl(2)](4+) which has been separated into two isomeric forms. NMR studies establish these as meso and rac isomers arising from the different or same absolute configurations for the asym configuration about each Co(III) center. Each dinuclear ion base hydrolyses to the dihydroxo derivative [Co(2)(tmpdtne)(OH)(2)](4+) with retained asym configurations about each metal ion and also retained rac or meso configurations. The kinetics for the stepwise loss of the two Cl(-) ligands is uniphasic, and data are presented to show that the loss of the first chloride is rate determining and is followed by very rapid intramolecular and loss of the second Cl(-) via a hydroxo-bridged species to yield the observed dihydroxo derivative. Meso and rac forms of the latter have been crystallized. The X-ray crystal structure of the rac-dihydroxo complex is reported, and it establishes the configurations of all the complexes reported. The (1)H NMR spectra for the hydroxo ions show very high field Co-OH resonances (ca. delta-0.5 ppm) not observed previously for such ions, and this result is discussed in the context of published (1)H NMR data for bridged Co-OH-Co species. The base hydrolysis kinetics for the dichloro ions are first order in [OH(-)], and deprotonation at an alpha-CH(2) center (alpha to a pyridyl) is identified as the source of the catalysis, since there is no NH center available for deprotonation on the ligand. These data further support the new pseudoaminate base hydrolysis mechanism first reported in 2003. The values of k(OH) for the second-order base-catalyzed reaction are ca. 4.0 M(-1) s(-1) for both the rac and meso isomers, and these results are discussed in terms of the increased acidities of these 4+ cations compared to their 2+ ion counterparts.     

A comparative investigation of the fatty acid compositions of the seeds of a number of lines of a genetic collection of Gossypium hirsutum

A comparative analysis has been made of the amounts of lipids and their fatty-acid compositions in the seeds of the lines of agenetic collection of cotton plants of the speciesGossypium hirsutum and their hybrids and the variety Tashkent-1. The results obtained on the fatty-acid compositions of some hybrids make it possible to recommend the use of individual lines of cotton plants as donors for improving the food-value indices of cottonseed oil.Institute of Chemsitry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–176, March–April, 1991.     

A unique mechanism for base catalyzed hydrolysis of pentaaminecobalt(III) complexes containing picolyl residues

A novel [Co(pentaamine)Cl](2+) complex having all tertiary amine or pyridine donors has been synthesized (pentaamine = 1,4-bis(2'-pyridyl)-7-methyl-1,4,7-triazacyclononane). This asym-[Co(dmpmetacn)Cl](2+) species has been completely characterized through 1D and 2D NMR studies, and through the X-ray structure for the ZnCl(4)(2)(-) salt. Despite the lack of an activating NH center, remarkably its hydrolysis to [Co(pentaamine)OH](2+) is base catalyzed (k(OH) 0.70 M(-)(1) s(-)(1), 25 degrees C, I = 1.0 M, NaCl). Detailed NMR studies reveal that the base catalyzed substitution leads to the exchange of just one deuterium in one of the two -CH(2)- pyridyl arms, that is approximately trans to the leaving group, and this occurs during and not after base hydrolysis. Quenching experiments for the reaction of asym-[Co(dmpmetacn)Cl](2+) and control experiments on H/D exchange for the product asym-[Co(dmpmetacn)OD](2+) in OD(-) show that each act of deprotonation at the acidic methylene leads to loss of Cl(-). This is the first established case of base catalyzed substitution for a complex where the effective site of deprotonation is at a pyridyl group. A pronounced kinetic isotope effect is observed for the species perdeuterated at the pyridyl methylenes (k(H)/k(D) = 5.0), consistent with rate limiting deprotonation which is a rare event in Co(III) substitution chemistry. The activation afforded by the carbanion is discussed in terms of a new process coined the pseudo-aminate mechanism.     

Syntheses of methylpyridine and methylpyridine N-oxide decorated benzoxazine and naphthoxazine platforms

Simple, aqueous-based syntheses of methylpyridine and methylpyridine N-oxide decorated 3,4-dihydro-2H-naphthoxazine and 2,3-dihydro-1H-naphthoxazine monomers, as well as thermally promoted syntheses of 3,4-dihydro-2H-benzoxazine monomers and bisoxazine methylpyridine derivatives of substituted 1,5-, 2,6-, and 2,7-dihydroxynaphthalenes are described. The crystal structures of two derivatives are presented.     

Effect of finite extensibility on the viscoelastic properties of a styrene–butadiene rubber vulcanizate in simple tensile deformations up to rupture

Stress–strain and rupture data were determined on an unfilled styrene–butadiene vulcanizate at temperatures from ?45 to 35°C and at extension rates from 0.0096 to 9.6 min^?1. The data were represented by four functions: (1) the well-known temperature function (shift factor) a_T; (2) the constant strain rate modulus, F(t,T), reduced to temperature T₀ and time t/a_T, i.e., T₀F(t/a_T)/T; (3) the time-dependent maximum extensibility, λ_m(t/a_T); and (4) a function Ω(χ) where χ = (λ ? 1)λ_m⁰/λ_m, in which λ is the extension ratio and λ_m⁰ is the maximum extensibility under equilibrium conditions. The constant strain rate modulus characterizes the stress–time response to a constant extension rate at small strains, within the range of linear response; λ_m is a material parameter needed to represent the response at large λ; and Ω(χ) represents the stress–strain curve of the material in a reference state of unit modulus and λ_m = λ_m. The shift factor a_T was found to be sensibly independent of extension. At all values of t/a_T for which the maximum extensibility is time-independent, the relaxation rate was also found to be independent of λ. These observations indicate that the monomeric friction coefficient is strain-independent over the ranges of T and λ covered in the present study. It was found that λ_m⁰ = 8.6 and that the largest extension ratio at break, (λ_b)_max, is 7.3. Thus, rupture always occurs before the network is fully extended.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

多功能两亲梳状聚合物的合成及包覆荧光量子点

利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.     

相对论性核碰撞中Φ介子产生和弦碎裂函数

用强子和弦级联模型LUCIAE系统研究从AGS到SPS,到RHIC,再到LHC能量核–核碰撞中Φ介子产生.采用与能量有关弦碎裂函数,并通过与荷电粒子多重数实验数据的比较确定其中的参数后,LUCIAE模型给出的Φ介子产额与实验数据也都相近,得到的事件平均弦碎裂变量随能量之增趋饱和规律,可能是核穿透性能量行为的定性表示.     

以LCD为目标的自动定焦判据选择

在光学综合自动测量中 ,使用液晶显示屏作为分划板可以大大简化结构 ,提高效率 ,真正地实现自动测量。由于液晶显示具有对比度低、噪声大等特点 ,所以根据液晶的这些特点以及图像处理和CCD信号接收的特点选择两种适用的判据进行了分析和试验比较 ,并给出了结果。结果表明 ,这两种判别函数都适用于以液晶显示屏为目标和用图像处理方法进行光学参数测量的系统 ,其中锐度判别函数更优于信息熵判别函数 ,前者具有更好的抗干扰性和稳定性 ,而且其判定结果更接近目视清晰度判别     

Revêtements modérés et groupe fondamenttal de graphe de groupes

Let R be a discrete complete valuation ring, with algebraically closedresidue field. Let X be a semi-stable R-curve, with smooth generic fibre. In this paper we study tame coverings of X.