Synthesis, structure, and kinetics and stereochemistry of base-catalyzed hydrolysis of meso- and rac-[Co2(tmpdtne)Cl2]4+, bis(pentaamine) complexes devoid of deprotonatable NH centers

The bis(pentadentate) ligand tmpdtne binds two Co(II) centers, and the entity is readily oxidized to the dicobalt(III) derivative [Co(2)(tmpdtne)Cl(2)](4+) which has been separated into two isomeric forms. NMR studies establish these as meso and rac isomers arising from the different or same absolute configurations for the asym configuration about each Co(III) center. Each dinuclear ion base hydrolyses to the dihydroxo derivative [Co(2)(tmpdtne)(OH)(2)](4+) with retained asym configurations about each metal ion and also retained rac or meso configurations. The kinetics for the stepwise loss of the two Cl(-) ligands is uniphasic, and data are presented to show that the loss of the first chloride is rate determining and is followed by very rapid intramolecular and loss of the second Cl(-) via a hydroxo-bridged species to yield the observed dihydroxo derivative. Meso and rac forms of the latter have been crystallized. The X-ray crystal structure of the rac-dihydroxo complex is reported, and it establishes the configurations of all the complexes reported. The (1)H NMR spectra for the hydroxo ions show very high field Co-OH resonances (ca. delta-0.5 ppm) not observed previously for such ions, and this result is discussed in the context of published (1)H NMR data for bridged Co-OH-Co species. The base hydrolysis kinetics for the dichloro ions are first order in [OH(-)], and deprotonation at an alpha-CH(2) center (alpha to a pyridyl) is identified as the source of the catalysis, since there is no NH center available for deprotonation on the ligand. These data further support the new pseudoaminate base hydrolysis mechanism first reported in 2003. The values of k(OH) for the second-order base-catalyzed reaction are ca. 4.0 M(-1) s(-1) for both the rac and meso isomers, and these results are discussed in terms of the increased acidities of these 4+ cations compared to their 2+ ion counterparts.     

A unique mechanism for base catalyzed hydrolysis of pentaaminecobalt(III) complexes containing picolyl residues

A novel [Co(pentaamine)Cl](2+) complex having all tertiary amine or pyridine donors has been synthesized (pentaamine = 1,4-bis(2'-pyridyl)-7-methyl-1,4,7-triazacyclononane). This asym-[Co(dmpmetacn)Cl](2+) species has been completely characterized through 1D and 2D NMR studies, and through the X-ray structure for the ZnCl(4)(2)(-) salt. Despite the lack of an activating NH center, remarkably its hydrolysis to [Co(pentaamine)OH](2+) is base catalyzed (k(OH) 0.70 M(-)(1) s(-)(1), 25 degrees C, I = 1.0 M, NaCl). Detailed NMR studies reveal that the base catalyzed substitution leads to the exchange of just one deuterium in one of the two -CH(2)- pyridyl arms, that is approximately trans to the leaving group, and this occurs during and not after base hydrolysis. Quenching experiments for the reaction of asym-[Co(dmpmetacn)Cl](2+) and control experiments on H/D exchange for the product asym-[Co(dmpmetacn)OD](2+) in OD(-) show that each act of deprotonation at the acidic methylene leads to loss of Cl(-). This is the first established case of base catalyzed substitution for a complex where the effective site of deprotonation is at a pyridyl group. A pronounced kinetic isotope effect is observed for the species perdeuterated at the pyridyl methylenes (k(H)/k(D) = 5.0), consistent with rate limiting deprotonation which is a rare event in Co(III) substitution chemistry. The activation afforded by the carbanion is discussed in terms of a new process coined the pseudo-aminate mechanism.     

Syntheses of methylpyridine and methylpyridine N-oxide decorated benzoxazine and naphthoxazine platforms

Simple, aqueous-based syntheses of methylpyridine and methylpyridine N-oxide decorated 3,4-dihydro-2H-naphthoxazine and 2,3-dihydro-1H-naphthoxazine monomers, as well as thermally promoted syntheses of 3,4-dihydro-2H-benzoxazine monomers and bisoxazine methylpyridine derivatives of substituted 1,5-, 2,6-, and 2,7-dihydroxynaphthalenes are described. The crystal structures of two derivatives are presented.     

Effect of finite extensibility on the viscoelastic properties of a styrene–butadiene rubber vulcanizate in simple tensile deformations up to rupture

Stress–strain and rupture data were determined on an unfilled styrene–butadiene vulcanizate at temperatures from ?45 to 35°C and at extension rates from 0.0096 to 9.6 min^?1. The data were represented by four functions: (1) the well-known temperature function (shift factor) a_T; (2) the constant strain rate modulus, F(t,T), reduced to temperature T₀ and time t/a_T, i.e., T₀F(t/a_T)/T; (3) the time-dependent maximum extensibility, λ_m(t/a_T); and (4) a function Ω(χ) where χ = (λ ? 1)λ_m⁰/λ_m, in which λ is the extension ratio and λ_m⁰ is the maximum extensibility under equilibrium conditions. The constant strain rate modulus characterizes the stress–time response to a constant extension rate at small strains, within the range of linear response; λ_m is a material parameter needed to represent the response at large λ; and Ω(χ) represents the stress–strain curve of the material in a reference state of unit modulus and λ_m = λ_m. The shift factor a_T was found to be sensibly independent of extension. At all values of t/a_T for which the maximum extensibility is time-independent, the relaxation rate was also found to be independent of λ. These observations indicate that the monomeric friction coefficient is strain-independent over the ranges of T and λ covered in the present study. It was found that λ_m⁰ = 8.6 and that the largest extension ratio at break, (λ_b)_max, is 7.3. Thus, rupture always occurs before the network is fully extended.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

Determination of the complex shear modulus of structural adhesives using a doubly clamped sandwich beam

A method is described for calculating the complex shear modulus of structural adhesives from dynamic test data on a doubly clamped sandwich beam in which the adhesive is contained as a thin layer. The accuracy of the technique is validated by finite-element analysis. Values of modulus obtained using the doubly clamped beam technique are found to be in excellent agreement with values obtained from dynamic tests on bulk specimens of an epoxy adhesive.     

A unique three-dimensional coordination cluster based on a silver carbene complex

In an attempt to perform a simple anion-exchange reaction on a pincer-carbene-ligated nickel complex using AgNO(3), we instead obtained an unexpected three-dimensional (3D) Ag(7) cluster containing a [Ag(6)] core in a twisted-bowtie geometry. The reverse-transmetalation reaction by which the carbene is transferred from nickel to silver is virtually unprecedented. The CNC pincer-carbene ligands exhibit unusual bridging modes of ligand bonding for all three donor atoms. Another unique feature is that the final structure exhibits a 3D structure brought about by the connection of two-dimensional layers of the [Ag(6)] core via a seventh Ag ion.     

Formation of a reversible, intramolecular main-group metal-CO2 adduct

The P,P-chelated stannylene [(i-Pr(2)P)(2)N](2)Sn takes up 2 equiv of carbon dioxide (CO(2)) to form an unusual product in which CO(2) binds to the Sn and P atoms, thus forming a six-membered ring complex. Gentle heating of the solid product releases CO(2), indicating that CO(2) is bound as an adduct to the main-group complex. The groups bound to the CO(2) fragment are not particularly sterically crowded or highly acidic, thus indicating that "frustrated" Lewis acid-base pairs are not required in the binding of CO(2) to main-group elements.     

The structures of some iminium salts. Crystal structures and13C NMR studies of 3-aryl-2-propenylideniminium salts

The X-ray crystal structures ofE-N, N-dimethyl-3-phenyl-2-propenylideniminium perchlorate,1, andE-N, N-dimethyl-3-(p-methoxyphenyl)-2-propenylideniminium perchlorate,2, have been determined.E-N,N-dimethyl-3-phenyl-2-propenylideniminium perchlorate, (C₁₁H₁₄N⁺)(ClO₄ ^–),1, is orthorhombic:Pmcn (No. 62)a=6.595(1),b=18,288(4),c=10.216(2) Å,Z=4.E-N, N-dimethyl-3-(p-methoxyphenyl)-2-propenylideniminium perchlorate, (C₁₂H₁₆NO⁺)(ClO₄ ^–),2, is triclinic:P1 (No. 2) with cell dimensionsa=6.862(1),b=9.830(2),c=13.376(3) Å,=119.05(1),=114.99(2), =90.79(2)°, andZ=2. Data for both crystals were collected with the use of MoK radiation and a Syntex P2₁ diffractometer. The crystal structures were solved by standard methods and refined toR ₁=0.0688,R ₂=0.0772 for1 andR ₁=0.0790 andR ₂=0.0757 for 2 based on 869 and 1765 independent reflections, respectively. The bond distances are consistent with a highly localized structure with the positive charge situated principally in the iminium moiety. The¹³C NMR spectra of these salts were obtained on the crystalline solids by CPMAS methods. Since the^13C chemical shifts of the salts were very similar, in both solution and solid states, it was concluded that the structures of the salts were comparable in both phases and were analogous.