Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.     

Modification and Application of Poly(Ethylene Terephethalate) Nonwoven Fiber Using Octadecyl Acrylate and Acrylic Acid as Oil Sorbers

Three series of crosslinked octadecyl acrylate and acrylic acid copolymers were prepared through suspension copolymerization based on acrylic acid content (10, 30, 50%wt. ratio). Divinyl benzene (DVB) was used as a crosslinker with different weight ratios (1, 4 and 10%). Isopropyl alcohol or dioctyl phthalate and methyl benzoate were used as two different reaction solvents in the presence of ABIN as initiator. The prepared crosslinked copolymers were characterized by SEM, TGA and FTIR spectroscopic analyses. The prepared polymers were coated onto poly(ethylene terephethalate) nonwoven fiber (NWPET). The effect of copolymerization feed composition, crosslinker wt% and reaction media or solvent on swelling properties of crosslinked polymers were studied through the oil absorption tests in toluene and 10% of diluted crude oil with toluene. It was noticed that the maximum swelling of crosslinked copolymers was increased from 30 to 100 g/g after grafting of copolymers onto NWPET.     

Investigation of novel composites to be used as backfill materials in radioactive waste disposal facilities

Journal of Radioanalytical and Nuclear Chemistry - The current work aims at the preparation and characterization of novel composite materials of acrylic acid/charcoal/montmorillonite (MMT) (PAACM...     

Development and validation of an ultra‐high‐performance liquid chromatography–tandem mass spectrometry method to determine the bioavailability of warfarin and its major metabolite 7‐hydroxy warfarin in rats dosed with oral formulations containing different polymorphic forms

A simple, sensitive and rapid ultra‐high‐performance liquid chromatography–electrospray ionization–tandem mass spectrometry method was developed and validated for the quantification of warfarin and 7‐hydroxy warfarin in Sprague Dawley (SD) rats. Animals were administered a single dose of warfarin sodium formulations (crystalline and amorphous) at 12 mg/kg via oral gavage and blood was drawn over a 96‐h time course. Sample process recoveries, matrix effect and analyte stability were determined. The linearity for warfarin and 7‐hydroxy warfarin was from 5 to 2000 ng/mL in blank SD rat plasma. Correlation coefficients (r²) for standard calibration curves were >.98 and analytes quantified within ±15% of target at all calibrator concentrations. The average percent accuracy and precision for intra‐ and inter‐day were 93.7%–113.8% and ≤12.1%, respectively, for warfarin and 7‐hydroxy warfarin, across the quality control standards (5, 10, 500, 1800 and 2000 ng/mL). Acceptable analytical recovery (>55%) was achieved with process efficiencies >41.5% and matrix effects <139.9% over the analytical range. Both analytes were stable in stock solution, autosampler, benchtop and three cycles of freeze–thaw with percent accuracy ≥90.2% and precision (percent relative standard deviation) ≤14%. The validated method was successfully applied to a pre‐clinical bioavailability study of crystalline and amorphous warfarin sodium formulations in SD rats.     

Synergistic effect of aluminum trihydrate and zirconium hydroxide nanoparticles on mechanical properties,flammability, and thermal degradation of polyester/jute fiber composite

Cellulose - This study focuses on the synergistic effects of hydroxide based nanoparticles namely aluminum trihydrate (ATH) and zirconium hydroxide (ZHO) on the mechanical characteristics, thermal...     

Virtual Screening,Synthesis and Biological Evaluation of Streptococcus mutans Mediated Biofilm Inhibitors

Dental caries, a global oral health concern, is a biofilm-mediated disease. Streptococcus mutans, the most prevalent oral microbiota, produces extracellular enzymes, including glycosyltransferases responsible for sucrose polymerization. In bacterial communities, the biofilm matrix confers resistance to host immune responses and antibiotics. Thus, in cases of chronic dental caries, inhibiting bacterial biofilm assembly should prevent demineralization of tooth enamel, thereby preventing tooth decay. A high throughput screening was performed in the present study to identify small molecule inhibitors of S. mutans glycosyltransferases. Multiple pharmacophore models were developed, validated with multiple datasets, and used for virtual screening against large chemical databases. Over 3000 drug-like hits were obtained that were analyzed to explore their binding mode. Finally, six compounds that showed good binding affinities were further analyzed for ADME (absorption, distribution, metabolism, and excretion) properties. The obtained in silico hits were evaluated for in vitro biofilm formation. The compounds displayed excellent antibiofilm activities with minimum inhibitory concentration (MIC) values of 15.26–250 µg/mL.     

Pregnane‐Type Steroidal Alkaloids of Sarcococca saligna: a New Class of Cholinesterase Inhibitors

Phytochemical investigation of Sarcococca saligna by extensive bioassay‐guided fractionation resulted in the isolation of the pregnane‐type steroidal alkaloids 1 – 15 , i.e. of the five new compounds 1 – 5 and the ten known alkaloids 6 – 15 . The structures of the new alkaloids salignenamide C ( 1 ), salignenamide D ( 2 ), 2β‐hydroxyepipachysamine D ( 3 ), salignenamide E ( 4 ), and salignenamide F ( 5 ) were elucidated with the help of modern spectroscopic techniques, while the known alkaloids axillarine C ( 6 ), axillarine F ( 7 ), sarcorine ( 8 ), N³‐demethylsaracodine ( 9 ), saligcinnamide ( 10 ), salignenamide A ( 11 ), vaganine A ( 12 ), axillaridine A ( 13 ), sarsalignone ( 14 ), and sarsalignenone ( 15 ) were identified by comparing their spectral data with those reported earlier. Inhibition of electric‐eel acetylcholinesterase (EC 3.1.1.7) and horse‐serum butyrylcholinesterase (EC 3.1.1.8) by alkaloids 1 – 15 were investigated. These new cholinesterase inhibitors may act as potential leads in the discovery of clinically useful inhibitors for nervous‐system disorders, particularly by reducing memory deficiency in Alzheimer's disease patients by potentiating and effecting the cholinergic transmission process. These compounds were found to inhibit both enzymes in a concentration‐dependent fashion with the IC₅₀ values ranging from 5.21–227.92 μM against acetylcholinesterase and 2.18–38.36 μM against butyrylcholinesterase.     

A novel route to prepare highly surface active nanogel particles based on nonaqueous emulsion polymerization

The motivation of the current work has stemmed from the fact that the selection of suitable stabilizers for nonaqueous emulsions is still challenging because of lack of general knowledge about the underlying stabilization mechanisms. The preparation and surface activity of new amphiphilic gel nanoparticles in organic solvents were investigated. A new bifunctional surfmer was prepared by reacting polyoxyethylene 4‐nonyl‐2‐propylene‐phenol nonionic reactive surfactant with maleic anhydride followed by esterification with poly(ethylene glycol). This surfmer was used as stabilizer to prepare amphiphilic crosslinked N‐isopropylacrylamide (NIPAm) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) copolymer nanogel on the basis of nonaqueous radical copolymerization temperature modified method in the presence of toluene and formamide (FA) as solvents and N, N‐methylene bisacrylamide as a crosslinker. The chemical structure of the prepared nanogels was determined by Fourier transform infrared spectroscopy analyses. The morphologies of the prepared nanogels were detected by transmission electron microscopy and scanning electron microscopy techniques. The surface tension of colloidal NIPAm/AMPS dispersions was measured in FA as functions of surface age (time), temperature, and the morphology of the NIPAm/AMPS nanogels. The NIPAm/AMPS nanogels reduced the surface tension of FA from 58.2 to about 30.2 mN/m at 25°C, and a little increase in the surface tension was observed at 40°C. The prepared nanogels show great reduction in interfacial tension values between FA and styrene. The NIPAm/AMPS dispersions exhibited high surface activity and used as stabilizers to prepare crosslinked styrene‐co‐AMPS microgel in the presence of divinylbenzene and FA as organic solvents based on nonaqueous emulsion crosslinking polymerization technique. Copyright © 2013 John Wiley & Sons, Ltd.     

Structure and magnetic properties of tetraarylporphinatomagnesium(II) electron transfer salts of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane,TCNQF4

The crystal structures of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, TCNQF(4), electron transfer salts of meso-tetraphenylporphinatomagnesium(II), [MgTPP][TCNQF(4)].PhMe and [MgTPP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)), and meso-tetrakis(3,4,5-trimethoxyphenyl)porphinatomagnesium(II), [MgT(3,4,5-OMe)PP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)), provide the first structurally characterized examples of 1-D metal-radical chains involving [Mg(II)(porphyrin(*))](+). These salts possess [TCNQF(4)](*-) stabilized by trans-mu-coordination to Mg(II) and exhibit nu(CN) at 2199 and 2177, 2212 and 2187, and 2194 and 2172 cm(-1), respectively. The [TCNQF(4)](*-) species is planar and bridges two cations with MgN distances of 2.266(16), 2.221(2), and 2.276(3) A, respectively, which are shorter than the MnN 2.321(3) A distance observed for [MnT(3,4,5-OMe)PP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)). The room-temperature effective moments for [MgTPP][TCNQF(4)].xS (S = PhMe and 1,2-C(6)H(4)Cl(2)) and [MgTPP][C(4)(CN)(6)].PhMe are consistent with the calculated spin only value of 2.45 micro(B) with weak antiferromagnetic coupling (J(intra)/k(B) approximately -2.9 K; H = -2JSa.Sb) for these [TCNQF(4)](*-) salts and for this [C(4)(CN)(6)](*-) salt (J(intra)/k(B) approximately -0.8 K) on the basis of fits to several models. The coupling is significantly reduced with respect to that of the Mn analogues due to lack of spin on the metal site for [Mg(II)(por(*))](+). The antiferromagnetic coupling is enhanced for [MgT(3,4,5-OMe)PP][TCNQF(4)] with respect to [MgTPP][TCNQF(4)] as [TCNQF(4)](*-) gets closer to the [Mg(II)(por(*))](+) plane, which leads to greater interactions and coupling.