High pressure X-ray diffraction study of CdAl2Se4 and Raman study of AAl2Se4 (A=Hg, Zn) and CdAl2X4 (X=Se, S)

We report the results of an X-ray diffraction study of CdAl₂Se₄ and of Raman studies of HgAl₂Se₄ and ZnAl₂Se₄ at room temperature, and of CdAl₂S₄ and CdAl₂Se₄ at 80 K at high pressure. The ambient pressure phase of CdAl₂Se₄ is stable up to a pressure of 9.1 GPa above which a phase transition to a disordered rock salt phase is observed. A fit of the volume pressure data to a Birch-Murnaghan type equation of state yields a bulk modulus of 52.1 GPa. The relative volume change at the phase transition at ∼9 GPa is about 10%. The analysis of the Raman data of HgAl₂Se₄ and ZnAl₂Se₄ reveals a general trend observed for different defect chalcopyrite materials. The line widths of the Raman peaks change at intermediate pressures between 4 and 6 GPa as an indication of the pressure induced two stage order-disorder transition observed in these materials. In addition, we include results of a low temperature Raman study of CdAl₂S₄ and CdAl₂Se₄, which shows a very weak temperature dependence of the Raman-active phonon modes.     

Selective quenching of tryptophanyl fluorescence in bovine serum albumin by the iodide ion

Modified Stern-Volmer equation is obeyed by bovine serum albumin (BSA)-iodide system showing selective quenching of tryptophanyl fluorescence of BSA. The fraction of accessible protein fluorescence is 0.56 and the effective Stern-Volmer constant is 290 M^-1 at pH 7.4 in 0.005 M phosphate buffer at 25°C. Collisional quenching is operative both in the BSA -I⁻¹ system and the model system, tryptophan-I⁻¹. It is supported by the observed relationship between the ratio of quenching rate constants (k _q ) and diffusion coefficients and alsok _q with bulk viscosity.     

On algebras of Toeplitz fuzzy matrices

In this paper, necessary and sufficient conditions are given for a product of Toeplitz fuzzy matrices to be Toeplitz. As an application, a criterion for normality of Toeplitz fuzzy matrices is derived and conditions are deduced for symmetric idempotency of Toeplitz fuzzy matrices. We discuss similar results for Hankel fuzzy matrices. Keywords: Fuzzy matrix, Toeplitz and Hankel matrices.     

On characterizing the bivariate exponential and geometric distributions

In this note, a characterization of the Gumbel's bivariate exponential distribution based on the properities of the conditional moments is discussed. The result forms a sort of bivariate analogue of the characterization of the univariate exponential distribution given by Sahobov and Geshev (1974) (cited in Lau and Rao ((1982), Sankhy Ser. A, 44, 87)). A discrete version of the property provides a similar conclusion relating to a bivariate geometric distribution.     

Amine-templated metal squarates

Two layered amine-templated cobalt squarates, [C₆N₂H₁₄]₂[Co₂(C₄O₄)₃(H₂O)₄], I, and [C₃N₂H₅]₂[Co₂(C₄O₄)₃(H₂O)₄], II, have been prepared under hydrothermal conditions. Both I and II contain chains formed by dimers comprising two cobalt atoms bound to the squarate units, the chains being connected through hydrogen bond interactions. An amine-templated cobalt squarate of the formula [C₄N₂H₁₂][Co(C₄O₄)₂(H₂O)₄][H₂O]₂, III, as well as its Ni, Zn and Cd analogues have been prepared by room temperature reactions. III has a layered architecture wherein the cobalt-squarate monomers are linked by the amine molecules. Co and Zn analogues of [Ni(C₄O₄)(H₂O)₂(C₃N₂H₄)] with ligating imidazole units have also been prepared and characterized.     

Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends

The thermal behaviour of styrene butadiene rubber (SBR)/poly (ethylene-co-vinyl acetate) (EVA) blends was studied by using thermogravimetry (TG) and differential scanning calorimetry (DSC). The effects of blend ratio, cross-linking systems and compatibilization on the thermal stability and phase transition of the blends were analyzed. It was found that the mass loss of the blends at any temperature was lower than that of the components, highlighting the advantage of blending SBR and EVA. The addition of compatibilizer was also found to improve the thermal stability. DSC studies indicated the thermodynamic immiscibility of SBR/EVA system even in the presence of the compatibilizer. This is evident from the presence of two different glass transition temperatures, corresponding to SBR and EVA phases in both compatibilized and uncompatibilized blends.     

A single amino acid Gly-tag enables metal-free protein purification

Analytically pure proteins are indispensable for diverse applications, including therapeutics. Here, we report a methodology where a single amino acid, glycine, enables metal-free protein purification. This robust platform is enabled by a Gly-tag resin for site-specific capture, enrichment, and release through chemically triggered C–C bond dissociation by resonance-assisted electron density polarization.

Gly-tag resin precisely captures and releases a protein with one glycine at the N-terminus. The user-friendly protocol delivers analytically pure protein free of metal contaminants.     

Rational syntheses of porphyrins bearing up to four different meso substituents

Porphyrins bearing specific patterns of substituents are crucial building blocks in biomimetic and materials chemistry. We have developed methodology that avoids statistical reactions, employs minimal chromatography, and affords up to gram quantities of regioisomerically pure porphyrins bearing predesignated patterns of up to four different meso substituents. The methodology is based upon the availability of multigram quantities of dipyrromethanes. A procedure for the diacylation of dipyrromethanes using EtMgBr and an acid chloride has been refined. A new procedure for the preparation of unsymmetrical diacyl dipyrromethanes has been developed that involves (1) monoacylation with EtMgBr and a pyridyl benzothioate followed by (2) introduction of the second acyl unit upon reaction with EtMgBr and an acid chloride. The scope of these acylation methods has been examined by preparing multigram quantities of diacyl dipyrromethanes bearing a variety of substituents. Reduction of the diacyl dipyrromethane to the corresponding dipyrromethane-dicarbinol is achieved with NaBH(4) in methanolic THF. Porphyrin formation involves the acid-catalyzed condensation of a dipyrromethane-dicarbinol and a dipyrromethane followed by oxidation with DDQ. Optimal conditions for the condensation were identified after examining various reaction parameters (solvent, temperature, acid, concentration, time). The conditions identified (2.5 mM reactants in acetonitrile containing 30 mM TFA at room temperature for <7 min) provided reaction without detectable scrambling (LD-MS) for aryl-substituted dipyrromethanes, and trace scrambling for alkyl-substituted dipyrromethanes. The desired porphyrins were obtained in 14-40% yield. The synthesis is compatible with diverse functionalities: amide, aldehyde, carboxylic acid, ester, nitrile, ether, bromo, iodo, ethyne, TMS-ethyne, TIPS-ethyne, perfluoroarene. In total 30 porphyrins of the types A(3)B, trans-A(2)B(2), trans-AB(2)C, cis-A(2)B(2), cis-A(2)BC, and ABCD were prepared, including >1-g quantities of three porphyrins.     

2‐Hydro­xy‐3‐(4,5,6,7‐tetra­hydro‐1H‐imidazo­[4,5‐c]­pyridin‐5‐ium‐4‐yl)­benzoate monohydrate

The title mol­ecule, C₁₃H₁₃N₃O₃·H₂O, is in the form of a mono­hydrated zwitterion. The tetra­hydro­pyridinium ring adopts an envelope conformation and is nearly coplanar with the plane of the imidazoline ring. The water solvate mol­ecule plays an important role as a bridge between zwitterions, forming molecular chains running along the c direction, which are interconnected by N—H?O hydrogen bonds into molecular ribbons. The crystal packing is further stabilized by another N—H?O and one O—H?N hydrogen bond, which interconnect the molecular ribbons.     

A novel method for the determination of synthetic colors in ice cream samples

A simple method has been developed for the extraction, separation, and determination of synthetic colors in ice cream samples. The process involves the breakdown of emulsion by neutral detergents (Triton X-100 and Tween 20) followed by extraction with petroleum ether for removal of fat. The aqueous colored solution obtained is treated with 5% acetic acid, and the uptake of color is carried out by a wool-dyeing technique. The color is eluted from the wool with 5% ammonia solution, the solution is evaporated to dryness, and the residue is dissolved in 60% ethanol for paper chromatography using trisodium citrate-ammonia-water (2 + 5 + 95, w/v/v) as the mobile phase. The colored spots from the paper chromatogram are cut and eluted with 60% ethanol, and the absorbance is measured at the respective lambda maximum corresponding to the Rf value of the appropriate standard. The recoveries of 6 colors, including sunset yellow FCF (SSYFCF), tartrazine, carmoisine, ponceau 4R, brilliant blue FCF (BBFCF), and fast green FCF from spiked samples with either detergent were found to be >90%. However, recoveries of erythrosine were 21 and 65% with Triton X-100 and Tween 20, respectively. Indigo carmine could not be recovered at all because of its fugitive property in 5% ammonia solution, which is used to strip the color from the wool. The sensitivity of the method with the use of Tween 20 is 1 ppm (1 microg/g) for the colors in spiked ice cream samples. With this method, we analyzed samples of 20 branded colored ice cream. The results showed the presence of tartrazine (8.4-43.3 ppm), SSYFCF (23.5-117.6 ppm), carmoisine (traces-53.2 ppm), erythrosine (3.5 ppm), and BBFCF (4.1 ppm) in the ice cream samples. Apart from 2 samples of tuttifruity, all of the ice cream samples showed the presence of permitted synthetic colors below the permissible level of 100 ppm established by the Prevention of Food Adulteration Act of India.