New “hyphenated” CPC-HPLC-DAD-MS strategy for simultaneous isolation, analysis and identification of phytochemicals: application to xanthones from Garcinia mangostana

Centrifugal partition chromatography (CPC) coupled online with high-performance liquid chromatography (HPLC) with diode-array detection (DAD) and mass spectrometry (MS) is presented in this work. This strategy offers the possibility to obtain simultaneously CPC fractionation of natural extracts, the HPLC fingerprint of separated fractions and structural information on molecules contained in each fraction. This new approach was applied to the fractionation and purification of xanthones from Garcinia mangostana (Clusiaceae) pericarp. A biphasic solvent system of heptane/ethyl acetate/methanol/water (2:1:2:1, v/v) was used for the CPC separation of 175?mg crude ethanolic extract. The HPLC analysis was conducted with a reversed-phase monolithic column allowing fast and repeatable separation. This combined CPC-HPLC-DAD-MS method led to isolation of 33?mg α-mangostin and 6?mg γ-mangostin at 98?% and 98.5?% purity, respectively, in 140?min. Furthermore, in the same time a total of 16 other xanthones were detected in the extract, and ten of them were identified on the basis of their UV and MS spectra.     

Robustness study of a reversed-phase liquid chromatographic method for the analysis of carboxylic acids in industrial reaction mixtures

The robustness study of the reversed-phase liquid chromatographic method developed for the quantitative analysis of carboxylic acids is a real asset to prepare method transfer because it provides an indication of its reliability during routine use. Indeed, it was possible to predict the consequences of small variations in operating conditions on the responses. The design of experiments approach was applied to model the effects and interactions of a high number of factors varying simultaneously with a limited number of runs. First we identified the factors which potentially affect the chromatographic responses used for carboxylic acids quantitation: detection wavelength (λ), column temperature (T), acetonitrile ratio in mobile phase (Me), duration of the plateau before the gradient (L) and gradient slope (S). Then we estimated the order of magnitude of realistic variations to assign factor levels. Finally a central composite design was carried out around the nominal conditions defined during method optimization. The statistical treatment of responses (retention factors, and concentrations) showed that the column temperature, the acetonitrile ratio in the mobile phase, the duration of the plateau before the gradient and the gradient slope were the most influent factors. The building of the robust domain from response-surfaces allowed us to give tolerance limits for the factors (216 nm < λ < 222 nm, 49.3 °C < T < 51.4 °C, 4.90% < Me < 5.18%, v/v, 4.5 min < L < 5.4 min, 9% < S < 11%) for which the performances of the method were maintained.     

Chromotropic acid,a fluorogenic chelating agent for aluminium(III)

Complexation of aluminium(III) with the fluorogenic ligand chromotropic acid (4,5-dihydroxynaphthalene-2,7-disulfonic acid) has been revisited with the aim of using enhancement of the fluorescence intensity as an analytical tool. Complexation at the optimum pH4 was shown to lead to a 1:1 complex with a stability constant log ₁₁₀=18.4±0.7. The fluorogenic effect was thoroughly investigated. Nearly selective excitation of the chelate rather than the ligand could be achieved at wavelengths longer than 360 nm. For analytical purposes the main interfering ion was Ga³⁺. The strongest competing ligand was shown to be citric acid. Competitive complexation by acetate or formate ions can also make their use in a buffer at the usual concentration, 0.2 mol L^–1, questionable, whereas a 10^–2 mol L^–1 formic acid buffer was shown to be a good alternative. The calibration plot showed that the dependence of response on Al(III) concentration was linear up to 500 g L^–1; the detection limit was 0.65 g L^–1 (3SD _blank, n=10, SD=±1.4% at 10 g L^–1 and ±0.8% at 100 g L^–1). The analytical procedure was successfully applied to several samples of tap water and the results were in good agreement with those from AAS determination.     

Chromatographic Properties of Ethanol/Water Mobile Phases on Silica Based Monolithic C18

A simple and reliable method based on capillary electrophoresis with electrochemical detection (CE–ED) was applied to study the effect of aerobic exercises on creatinine and uric acid concertration in saliva and urine. The pH value, the running buffer concentration, the SDS concentration, separation voltage, injection time and the potential applied to the working electrode were investigated to find the optimum conditions. The detection limits (S/N = 3) for creatinine and uric acid were 3.6 μmol L⁻¹ and 0.86 μmol L⁻¹, respectively. This method was successfully used in the rapid analysis of creatinine and uric acid in saliva samples. After aerobic exercises, creatinine concentration decreased, and uric acid concentration increased in saliva. In urine, the concentrations of creatinine and uric acid both increased after exercise.

     

Centrifugal partition chromatography directly interfaced with mass spectrometry for the fast screening and fractionation of major xanthones in Garcina mangostana

Xanthones are well known for their interesting phytochemical properties, which make them attractive to the pharmaceutical and medicinal industry. We have therefore developed a method to analyse the major xanthones in Garcina mangostana. The xanthones were extracted by pressurized liquid extraction with ethanol and separated at the semi-preparative scale by centrifugal partition chromatography (CPC) with a biphasic solvent system consisting of heptane/ethyl acetate/methanol/water (2:1:2:1, v/v/v/v). A CPC-electrospray ionisation MS coupling was performed and used to simultaneously separate and identify the compounds. Thanks to a variable flow splitter and an additional stream of ethanol/1 mol L⁻¹ ammonium acetate (95:5, v/v), all the compounds were ionised, detected and monitored whatever the solvents used in mobile phase for the CPC separation. The dual mode or elution–extrusion which are less solvent-consuming and faster than the elution mode were used without loss of ionisation and detection.     

On-line hyphenation of centrifugal partition chromatography and high pressure liquid chromatography for the fractionation of flavonoids from Hippophaë rhamnoides L. berries

Centrifugal Partition Chromatography (CPC), a liquid–liquid preparative chromatography using two immiscible solvent systems, benefits from numerous advantages for the separation or purification of synthetic or natural products. This study presents the on-line hyphenation of CPC-Evaporative Light Scattering Detector (CPC-ELSD) with High Performance Liquid Chromatography-UV (HPLC-UV) for the fractionation of flavonols from a solvent-free microwave extract of sea buckthorn (Hippophaë rhamnoides L., Elaeagnaceae) berries. An Arizona G system was used for the fractionation of flavonoids by CPC and a fused core Halo C18 column allowed the on-line analyses of collected fractions by HPLC. The on-line CPC/HPLC procedure allowed the simultaneous fractionation step at preparative scale combined with the HPLC analyses which provide direct fingerprint of collected fractions. Thus the crude extract was simplified and immediate information on the composition of fractions could be obtained. Furthermore, this methodology reduced the time of post-fractionation steps and facilitated identification of main molecules by Mass Spectrometry (MS). Rutin, isorhamnetin-3-O-rutinoside, isorhamnetin-3-O-glucoside, quercetin-3-O-glucoside, isorhamnetin-rhamnoside, quercetin and isorhamnetin were identified. CPC-ELSD/HPLC-UV could be considered as a high-throughput technique for the guided fractionation of bioactive natural products from complex crude extracts.     

Hyphenation of centrifugal partition chromatography with electrospray ionization mass spectrometry using an active flow‐splitter device for characterization of flavonol glycosides

Online coupling of centrifugal partition chromatography to electrospray ionization mass spectrometry (CPC/ESI‐MS) was investigated for the separation and characterization of flavonol glycosides. Structural identification and purification monitoring of analytes on milligram scale were demonstrated to be possible by using an active flow‐splitter device which transfers automatically and successively, at discrete frequencies, small aliquots of the chromatographic effluent to an independent auxiliary stream directed to an ESI quadrupole mass spectrometer. The CPC protocol used a biphasic solvent system composed of ethyl acetate/ethanol/water (4.5:1:4.5, v/v/v) in isocratic mode. During the separation process, continuous acquisition of mass spectral data of the isolated flavonols from the effluent was performed in the negative ion mode with an auxiliary stream composed of 50 mM ammonium acetate/ethanol (2:8, v/v) delivered by a secondary pump. To demonstrate the potential of this hyphenated technique, flavonol glycosides from an apple peel extract were identified, purified and quantitatively analyzed. Calibration curves and limits of detection are also detailed. Copyright © 2009 John Wiley & Sons, Ltd.     

New advances in countercurrent chromatography and centrifugal partition chromatography: focus on coupling strategy

Countercurrent chromatography (CCC) is an attractive separation method because the analytes are partitioned between two immiscible liquid phases avoiding problems related to solid stationary phase. In recent years, this technique has made great progress in separation power and detection potential. This review describes coupling strategies involving high speed CCC (HSCCC) or centrifugal partition chromatography (CPC). It includes on-line extraction–isolation, hyphenation with mass spectrometry (MS) and nuclear magnetic resonance (NMR) detectors, multidimensional CCC (MDCCC), two-dimensional CCC (2D-CCC), on-line coupling with liquid chromatography (LC), and biological tests, and innovative off-line developments. The basic principles of each method are presented and applications are summarized.     

A novel microfluidic flow-injection analysis device with fluorescence detection for cation sensing. Application to potassium

A microfabricated device has been developed for fluorimetric detection of potassium ions without previous separation. It is based on use of a fluorescent molecular sensor, calix–bodipy, specially designed to be sensitive to and selective for the target ion. The device is essentially made of a Y-shape microchannel moulded in PDMS fixed on a glass substrate. A passive mixer is used for mixing the reactant and the analyte. The optical detection arrangement uses two optical fibres, one for excitation by a light-emitting diode, the other for collection of the fluorescence. This system enabled the flow-injection analysis of the concentration of potassium ions in aqueous solutions with a detection limit of 0.5 mmol L⁻¹ and without interference with sodium ions. A calibration plot was constructed using potassium standard solutions in the range 0–16 mmol L⁻¹, and was used for the determination of the potassium content of a pharmaceutical pill. Figure Photography of the microfluidic channel showing the ridges in the PDMS substrate at the top of the channel