木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

理想微裂纹系统中的随机扩展效应

本文讨论了在理想微裂纹系统中,由于微裂纹的随机性扩展,对微裂纹统计演化产生的效应。文中提供了一般的理论框架,给出了便于处理的转移概率的表达式。最后,用数值计算的例子展示了随机模型的统计演化特征,并比较了与确定性扩展模型下统计演化的异同。     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

Preparation and characterization of iron oxide thin films by spray pyrolysis using methanolic and ethanolic solutions

Iron oxide thin films have been obtained by spray pyrolysis using 100% methanolic and ethanolic solutions of iron tri-chloride. The films were deposited onto ITO-coated glass substrates. The preparative conditions have been optimized to obtain compact, pin-hole-free and smooth thin films which are adherent to the substrate. The structural, morphological and compositional characterizations have been carried out by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. The films deposited using ethanolic solution results into pure hematite; α-Fe₂O₃ thin films, however, films deposited using methanolic solution consists of hematite and maghemite-c phases of iron oxide. The films are nanocrystalline with particle size of 30-40 nm. The optical absorbance of the film was of the order of 10⁵ cm⁻¹. The optical band gap of films was found to be 2.26 and 2.20 eV for the films deposited using methanolic and ethanolic solutions, respectively.     

Influence of humic substances on sorption and methylation processes of inorganic- and organo-tin species

The influence of humic substances on sorption and methylation processes for inorganic- and organotin species is presented. Four sediment samples from different locations of the Rivers Elbe, Mulde and Spittelwasser, Germany, with different organotin and humic contents were selected to extract the humic and fulvic acids. The various fractions—the original sediment, the humic acid, the fulvic acid and the residual sediment—were analysed for their organotin content. The individual buyltin species show quite different distribution patterns. Monobutyltin is found mostly associated with humic acids. Dibutyltin shows a nonunique behaviour. At low total organotin content, dibutyltin is found bonded to humic and fulvic acids, whereas at high organotin content dibutyltin is distributed more with the residual sediment. Most of the tributyltin remains in the sediment unextracted; only small quantities of it are in the fulvic acid fraction. Tetrabutyltin is only in the humic acid fraction when it binds to humic matter; it mostly remains in the sediment. General observations indicate that ionic butyltin species bind to fulvic acids whereas the non-polar tetrabutyltin is not found in the fulvic acid fractions in any of the samples. The appearance of monomethyl- and dimethyl-tin species in the humic and fulvic acid fractions after the alkaline extraction was surprising. There is a correlation between the humic content of the sample and the formation of methyltin species. Evidence is provided by experiments that humic substances act as methylation agents.     

Role of orientation in kinetics of nucleation and growth of crystals in polymers

A theoretical framework is provided for generalizing the inferences drawn from the results of earlier experimental studies of kinetics of crystallization in oriented poly(ethylene terephthalate). The framework is obtained by combining extensions of classical nucleation theories in polymers^3,4 and a theory of crystal growth with anisotropic incorporation of segments into growing crystals.¹⁵ It is shown that, while a very strong dependence of rate of primary nucleation on orientation does exist, there is a only a much weaker dependence of rate of crystal growth on the orientation of the crystallizing polymer. The theoretical formulation provided here would allow qualitative estimates for comparison with experiments.     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

Stoichiometry-dependent formation of quantum dot-antibody bioconjugates: a complementary atomic force microscopy and agarose gel electrophoresis study

The unique advantages of quantum dot (QD) bioconjugates have motivated their application in biological assays. However, physical characterization of bioconjugated QDs after surface modification has often been overlooked. Here, biotinylated antibodies (biotin-IgG) were attached to commercial streptavidin-conjugated quantum dots (strep-QDs) at different stoichiometric ratios, and these QD bioconjugates were characterized with atomic force microscopy and discontinuous sodium dodecyl sulfate agarose gel electrophoresis (SDS-AGE). The results from these complementary analytical techniques showed that the molar ratio determined the relative sizes, molecular weights and morphologies of the QD bioconjugates. Additionally, the novel discontinuous SDS-AGE analysis confirmed specific binding between biotin-IgG and strep-QDs. Researchers who design QD bioconjugates for cell-based assays should consider stoichiometry-dependent differences in the physical properties of their QD bioconjugates.