Plasma parameters within the cathode spot of the vacuum arc

The composition of the vacuum arc plasma for five elements (Cd, Mg, Al, Ni, and Mo) is calculated by the Saha equation, which assumes local thermodynamic equilibrium conditions within the ionization region of the cathode spot(s). The lowering of the ionization potential due to the high density of charged particles is considered. By matching the computed and the measured plasma ionic composition, the electron density and the temperature are estimated. The experimental plasma compositions can be approximated only at a high electron density (10¹⁹-10 ²¹ cm^-3) and at electron temperatures in the range of a few electronvolts     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Polymerization photoinitiated by carbonyl compounds. VI. Mechanism of benzil photoinitiation

The mechanism of the photoinitiation of the vinyl polymerization sensitized by benzil and 4,4′-dimethoxybenzil was studied. The monomers considered were methacrylic acid esters and styrene derivatives. All these monomers are efficient quenchers of the excited triplet benzil. However, the initiation efficiency of the benzil is important only when styrene derivatives are employed as monomers. The main polymerization process follows a simple free radical mechanism. The initiation step is a consequence of the interaction (triplet benzil–monomer double bond) through a charge transfer complex.     

New polymer-supported catalysts. (Polyvinylchloride-containing redox) catalyst cyclopentadienyl iron moiety: [η5C5H5Feη6C6(CH3)5CH2?]+

New polymer-supported catalysts that contain the redox cyclopentadienyl iron moiety [η⁵C₅H₅Feη⁶C₆(CH₃)₅CH₂? ]⁺ were prepared with polyvinylchloride (PVC) as support. The active center is attached as a pendant organometallic moiety in the side groups of the PVC chain. Metallocenic groups and the supported polymers with various Fe content were analyzed by spectroscopic techniques and by polarographic and cyclic voltammetry. The absorption spectra show a similar profile to that of the nonsupported cation, which indicates that the supported polymer contains side groups in the chain with metallocenic structures. The new polymer-supported catalysts were characterized by viscometric measurements and by differential calorimetry (DSC). A linear relationship between intrinsic viscosity/[η] and the Fe content was observed. The glass transition temperature (T_g) values are higher than those of PVC without modification.     

Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.

     

Conformational characteristics of poly(vinylpyrrolidone). solvent-dependence of the chain dimensions

Conformational energies as function of rotational angles over two consecutive skeletal bonds for both meso and racemic diads of poly(Nvinyl-2-pyrrolidone) have been computed. The results of these calculations were used to formulate a statistical model that was then employed to calculate the unperturbed dimensions of this polymer. The conformational energies are sensitive to the Coulombic interactions, which are governed by the dielectric constant, of the solvent, and to the size of the solvent molecules. Consequently, the calculated values of the polymeric chain dimensions are strongly dependent on the nature of the solvent, as it was experimentally found before.     

Synthesis and solution properties of comblike poly(mono-n-alkyl itaconates). I. Poly(monodecyl itaconate)

The monoester of itaconic acid with n-decyl alcohol was prepared and polymerized. The polymer was fractionated and characterized by viscometry, size-exclusion chromatography (SEC) and light scattering. Some of the common semiempirical relations for flexible and rigid polymers were used in order to obtain the unperturbed dimensions and the conformational parameters. Thermodynamic and dimensional parameters were determined and calculated. The results are compared with those reported previously for similar compounds.     

Poly(ester)s Containing Germanium and Silicon in the Main Chain. 1. Langmuir Monolayer Characterization

Surface characterization of poly(ester)s containing germanium (Ge) or silicon (Si) in the main chain was studied. Surface pressure‐area isotherms (π‐A) at the air/water interface were obtained by monolayer compression at constant temperature. The molecular areas from the pressure‐area isotherms were estimated for all polymers. At low surface concentrations poly(ester)s the characterization of monolayers was carried out according to the variation of the surface pressure as a function of the surface concentration; the behavior observed was described by the virial expansion development. In the semidilute region, the surface pressure variation was expressed according to the scaling laws as a power function of the surface concentration. It was found that the chemical structure of the poly(ester)s studied influences the type of the isotherms. The morphology of the monolayers was observed by Brewster angle microscopy (BAM). The molecular mechanics approach was used to obtain predictions about the local interaction energies between segments and to explain the minimum area values at the collapse point.     

Environmentally friendly synthesis of noble metal nanoparticles assisted by biodegradable dextran‐graft‐lactone copolymers

A simple “green synthesis” of noble metal nanoparticles by direct reaction between Dextran‐graft‐lactone copolymers and metal salts without the need to separately add reducing and stabilizing agents was carried out. The effects of the composition, molecular weights of copolymers and solvents on the characteristics of the nanoparticles were considered. The amphiphilic character of the copolymers seems to be an important factor in the results of the synthesis. According to the results, general correlations between experimental parameters of synthesis and characteristics of the obtained nanoparticles were established. Techniques such as, transmission electron microscopy, scanning electron microscopy, UV–visible spectroscopy, Zeta Potential, dynamic light scattering and Fourier transform Infrared Spectroscopy, were used for the characterization of the products. The results indicate the possibility of control of the characteristics of the nanostructured material. Copyright © 2014 John Wiley & Sons, Ltd.     

Photorefraction in lead tin-fluorophosphate glasses

Permanent grating patterns have been written directly in lead-tin-fluorophosphate glasses by use of UV radiation. The effect of photorefraction is studied in different tin-fluorophosphate compositions. Recorded gratings are found to be volume rather than surface elements. The induced index changes are comparable with those seen in GeO(2)- SiO(2) glasses.