Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and T1, it was possible to obtain accurate results despite the 35-40% suppression in the signals. Isobaric overlap was only a problem in the cases of 42Ca and 78Se; 44Ca and 77Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

Synthesis,characterization and antioxidant,antibacterial activity Zn2+, Cu2+, Ni2+ and Co2+, complexes of ligand [2-(thiophen-2-yl)-1-(thiophen-2-ylmethyl)-1H-benzo[d]imidazole]

New metal complexes of (Zn(II), Co(II), Ni(II) and Cu(II)) based on the ligand 2-(thiophen-2-yl)-1-(thiophen-2-ylmethyl)-1H-benzo[d]imidazole] were synthesized, whose structures were determined with the different spectroscopic techniques ¹H NMR,¹³C NMR, FT-IR, UV–Visible and by mass spectrometry. The thermal analysis was performed by TG-DTA. The antioxidant activity of the ligand and its complexes was evaluated by DPPH (2,2-diphenyl-1-picrylhydrazyl) method, in comparison with the synthetic antioxidant, ascorbic acid. The results obtained showed that the antioxidant activity of the ligand and its complexes is moderate and that the copper complex has a high activity that exceeds that of ascorbic acid. Antimicrobial activity of the ligand and its metal complexes was studied against two Gram-positive bacteria: Bacillus subtilis ILP1428B, Staphylococcus aureus CIP543154 and two Gram-negative bacteria: Pseudomonas aeruginosa ATCC27653, Escherichia coli CIP5412 (American Type Culture Collection)the activity data show that the metal complexes are more potent than the free ligand.     

Zone-center soft mode behavior in the cubic phase of NaNbO3

The temperature dependence of the zone-center polar lattice vibrations, including a soft mode, in the cubic phase of NaNbO₃ as observed by infrared reflectivity spectroscopy, is reported. Data are analysed and discussed in the light of results previously obtained in other oxidic perovskites.     

On the lock-in phase transformation in thiourea

Elastic neutron scattering experiments show clear evidence for the lock-in wave vector being $\text{b}{}^{\mathrm{<mtext>x</mtext><mtext>9</mtext>}}$ in thiourea. A commensurate 9b superstructure is stabilized in the 2 K range just above the ferroelectric transition. A global hysteresis on the wave vector variation is also observed.     

Analytical selenoamino acid studies by chromatography with interfaced atomic mass spectrometry and atomic emission spectral detection

Consumption of selenium enriched plants or yeast-based nutritional supplements has been reported to provide anticarcinogenic benefits which are selenium compound dependent. Separation and identification of these selenium compounds is critical to understand the activity. Plants and yeast convert inorganic selenium in the soil or growth media into organoselenium compounds, probably following a route similar to the sulfur assimilatory pathway. Non-volatile selenium compounds produced include selenoamino acids, some of which have shown anticarcinogenic activity. Volatile compounds produced by chemical reaction of involatile precursors have also been found. An ion pair chromatographic method with ICP-MS detection for the separation of selenoamino acid standards potentially present in real samples is given. The method allows separation of selenoamino acids including such analytes as the cis-trans isomers of Se-1-propenyl-dl-selenocysteine. The method also provides the capability of determining the presence of selenoxides and possibly selenones, and tracking of other functionalities and reactions by selective derivatization. Alternatively, selenoamino acids are treated with ethylchloroformate to produce stable volatile derivatives which are amenable to GC separation with element specific atomic emission detection (GC-AED). Results of total selenium determination and speciation of selenium enriched yeast-based nutritional supplements, selenium enriched allium vegetables and bioremediation samples are presented.     

固相萃取-毛细管柱气相色谱-质谱测定土壤和蔬菜中三唑酮残留量

提出固相萃取分离,毛细管柱气相色谱和质谱联用法测定土壤及蔬菜中三唑酮的残留量.试样用乙腈提取,所得提取液在80℃吹氮至近干,并加正己烷2 mL溶解残渣.此溶液流经填充酸性氧化铝的固相萃取小柱,用正己烷-丙酮(2+1)混合溶剂淋洗小柱,使土壤样品中存在的硫磺与需测定的三唑酮分离.用正己烷一丙酮(1+3)混合溶剂将三唑酮从小柱上解吸洗下,所得洗出液蒸发浓缩,用正己烷定容为5.0 mL供GC-MS分析用.测定中用三唑酮标准溶液制备浓度范围在0.006～1.44 mg·L-1之间的标准曲线.方法的检出限(3S/N)为0.001 mg·kg-1.在3个浓度水平上对方法的回收及精密度作了试验,测得其回收率及相对标准偏差(n=5)依次在84%～92 9,5及1.93%～4.04%之间.     

Differential non-destructive image current detection in a fourier transform quadrupole ion trap

Dual-detector differential non-destructive Fourier transform detection in a quadrupole ion trap is shown to improve signal intensity and reduce noise compared with spectra recorded using a single detector. A larger area detector in each end-cap electrode is machined to fit its hyperbolic shape and so minimize field imperfections on the z-axis. Argon, acetophenone and bromobenzene spectra were recorded to allow a comparison between single- and dual-detector (differential) modes of detection and to demonstrate the improvement achieved with differential detection. Copyright 1999 John Wiley & Sons, Ltd.     

Determination of Methanol Increment in Mobile Phase Consisting of Methanol and Water by On—line UV Spectrometry in Reversed Phase Liquid Chromatography

ＩｎｔｒｏｄｕｃｔｉｏｎＦｒｏｎｔａｌｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＦＣ) ,ａｎｏｌｄｂｒａｎｃｈｉｎｌｉｑｕｉｄｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＬＣ) ,1ｈａｓｂｅｅｎｓｕｃｃｅｓｓｆｕｌｌｙｅｍ ｐｌｏｙｅｄｉｎｔｈｅｓｏｌｕｔｉｏｎｏｆｍａｎｙｔｈｅｏｒｅｔｉｃａｌａｓｗｅｌｌａｓａｐ ｐｌｉｅｄｐｒｏｂｌｅｍｓ—ｓｕｃｈａｓｍｅａｓｕｒｉｎｇｂｉｎｄｉｎｇｃｏｎｓｔａｎｔｂｅ ｔｗｅｅｎｃｏｍｐｏｎｅｎｔｓ2 ａｎｄｋｉｎｅｔｉｃｐａｒａｍｅｔｅｒｓｏｆｃｈｅｍｉｃａｌｒｅａｃｔｉｏｎｓ ,3 ａｄｓ…     

Determination of arsenic in gold by flow injection inductively coupled plasma mass spectrometry with matrix removal by reductive precipitation

Arsenic was determined in gold by flow injection hydride generation inductively coupled plasma-mass spectrometry following a batch mode reductive precipitation removal of the interfering gold matrix. A solution of potassium iodide, L-ascorbic acid, and hydrochloric acid was used as the reluctant. The recovery of gold by precipitation and filtration was 99 ± 3%. The detection limit for arsenic in gold was 55 ng g⁻¹ in the solid. The concentration of arsenic that was determined in the Royal Canadian Mint gold sample FAU-10 was 29.7 μg g⁻¹ in the solid; this value was indistinguishable, with 95% confidence, from values determined at the Royal Canadian Mint by graphite furnace atomic absorption spectrometry and by inductively coupled plasma-mass spectrometry. The standard deviation for four replicate determinations of the arsenic in FAU-10 was 0.972 μg g⁻¹ in the solid.