Confusion effects with sinusoidal and narrow-band noise forward maskers

In some forward-masking conditions, signal thresholds may be elevated by the listener's inability to distinguish the signal from the preceding masker. In this study, such "confusion" effects are investigated for both sinusoidal and narrow-band noise forward maskers combined with sinusoidal signals of varying duration. Results for the sinusoidal maskers show effects of off-frequency listening for brief signals and possibly small effects of confusion for longer signals. Results for the narrow-band noise maskers show a marked influence of confusion over a wide range of signal durations. This range is in good agreement with that predicted from previous work with "pulsing" maskers [D. Neff, J. Acoust. Soc. Am. 78, 1966-1976 (1985)]. These results suggest that studies using narrow-band noise forward maskers or studies of psychophysical suppression should include direct tests for confusion effects in key conditions.     

Pyridylmagnesiates: generation by bromine–metal exchange and enantioselective addition to aldehydes

Butyl and dibutylmagnesiates incorporating chiral ligands have been prepared and their reactivity studied. The reagents were efficient to promote the clean bromine–magnesium exchange of azinyl bromides at room temperature and subsequent reaction with aldehydes affording pyridylcarbinols. (R,R)-TADDOL-based dibutylmagnesiate was the best reagent leading to acceptable to good enantioselectivities, depending on the substrate and on the aldehyde substitution. This is the first example of enantioselective addition of in situ generated pyridylmagnesiate to carbonyl electrophiles.     

Additivity of forward masking

Masked thresholds for a 1000-Hz sinusoidal signal were measured as a function of masker level in both forward and simultaneous masking for two types of maskers: a 1000-Hz sinusoid and a narrowband noise, 60-Hz wide, centered at 1000 Hz. In forward masking, the noise masker produced much steeper growth-of-masking functions than the sinusoid. Presenting a contralateral broadband noise "cue" with the forward masker dramatically reduced the slope of masking for the noise masker but did not influence results for the sinusoidal masker. The noise remained the more effective masker. The amount of masking produced by combinations of equally effective narrowband-noise and sinusoidal maskers was compared to that produced by each masker individually with and without the contralateral cue. No additional masking beyond that predicted by energy summation was measured for forward masking. Additional masking beyond energy-sum predictions was measured for analogous conditions in simultaneous masking. Comparisons of results obtained with and without the contralateral cue suggest that signal thresholds in the presence of narrowband-noise forward maskers can reflect nonperipheral auditory processes.     

Infrared camera based on a curved retina

Design of miniature and light cameras requires an optical design breakthrough to achieve good optical performance. Solutions inspired by animals' eyes are the most promising. The curvature of the retina offers several advantages, such as uniform intensity and no field curvature, but this feature is not used. The work presented here is a solution to spherically bend monolithic IR detectors. Compared to state-of-the-art methods, a higher fill factor is obtained and the device fabrication process is not modified. We made an IR eye camera with a single lens and a curved IR bolometer. Images captured are well resolved and have good contrast, and the modulation transfer function shows better quality when comparing with planar systems.     

The Largest Eigenvalue of Rank One Deformation of Large Wigner Matrices

The purpose of this paper is to establish universality of the fluctuations of the largest eigenvalue for some non-necessarily Gaussian complex Deformed Wigner Ensembles. The real model is also considered. Our approach is close to the one used by A. Soshnikov (cf. [11]) in the investigations of classical real or complex Wigner Ensembles. It is based on the computation of moments of traces of high powers of the random matrices under consideration.     

Ideal cylindrical cloak: perfect but sensitive to tiny perturbations

A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, because of the slow convergence of the zeroth-order scattering coefficients, a tiny perturbation on the cloak would induce a noticeable field scattering and penetration.     

X-rays absorption study on medieval corrosion layers for the understanding of very long-term indoor atmospheric iron corrosion

The study and prediction of very long-term atmospheric corrosion behaviour of ferrous alloys is of great importance in different fields. First the conservation of metallic artefacts in museum and the corrosion diagnosis on ferrous reinforcement used in ancient monuments since medieval times needs reliable data to understand the mechanisms. Second, in the frame of the interim storage of nuclear waste in France, it is necessary to model the long-term corrosion of low alloy steel overcontainer. The nature of phases and elements constituting the corrosion layers can greatly influence the corrosion mechanisms. On the one hand, it is crucial to precisely determine the nature of microscopic phases that can be highly reactive. On the other hand, some elements as P and S could modify this reactivity. To clarify this point and complementary to other studies using Raman micro spectroscopy technique, X-rays Absorption Spectroscopy (XAS) under synchrotron radiation plays a crucial role. It allows one to precisely identify the reactive phases in the corrosion layers. Micro-XAS was required in order to refine the spatial variation, at micrometer scale, of the predominant Fe oxidation state and to characterise the corresponding corrosion products. Moreover, the role of minor elements on phase’s stability and the chemical form of these elements in the rust layer, especially phosphorus and sulphur, was investigated.     

Frequency down-conversion using cascading arrays of coupled nonlinear oscillators

A novel coupling scheme using M≥2 arrays of coupled nonlinear elements arranged in a specific configuration can produce multifrequency patterns or a frequency down-converting effect on an external (input) signal. In such a configuration, each array contains N≥3 nonlinear elements with similar dynamics and each element is coupled unidirectionally within the array. The subsequent arrays in the cascade are coupled in a similar fashion except that the coupling direction is arranged in the opposite direction with respect to that of the preceding array. Previous theoretical work and numerical results have already been reported in [P. Longhini, A. Palacios, V. In, J. Neff, A. Kho, A. Bulsara, Exploiting dynamical symmetry in coupled nonlinear elements for efficient frequency down-conversion, Phys. Rev. E 76 (2007) 026201]. This paper is focused on results of experiments implemented on two distinct systems: the first system is fabricated using discrete component circuits to approximate an overdamped bistable Duffing oscillator described by a quartic potential system, and the second system is built in a microcircuit, where the nonlinearity is described by a hyperbolic tangent function, with the option of applying an external signal to investigate resonant effects. In particular, the circuit implementations for each case use M=2 arrays, but their voltage oscillations already demonstrate that the frequency relations between each of the successive arrays decrease by a rational factor, conforming to earlier theoretical and numerical results for the general case containing M arrays. This behavior is important for efficient frequency down-converting applications which are essential in many communication systems where heterodyning is typically used and it involves multi-step processes with complicated circuitry.     

Analysis of the hollow cathode emitted electron beams in a radialmultichannel pseudospark

A radial multichannel pseudospark switch seems advantageous for switching currents exceeding 100 kA. A single common hollow cathode guarantees the same trigger conditions for all channels. The electron beams emitted out of the hollow cathode of this switch are analyzed by means of Faraday-cups by varying the circuit as well as the trigger parameters. In addition to the cup measurements, the discharge is observed using a CCD camera. It is found that each channel of the switch must receive a respective beam, before the resistance of the switch turns low, if the discharge current is to run through that channel. In addition, most of the varied parameters do not influence the electron beam     

Development of SPME on-fiber derivatization for the sampling of formaldehyde and other carbonyl compounds in indoor air

Solid-phase microextraction on-fiber derivatization applied to carbonyl compounds is known, but application to indoor air is poorly developed and the methods deserve to be complemented and optimized. In this work, two derivatization reagents, pentafluorophenylhydrazine and o-2,3,4,5,6-(pentaflurobenzyl)hydroxylamine (PFBHA), and three fiber coatings were tested in order to select the best combination. As Carboxen-based coatings were proven to induce the formation of by-products during the thermal desorption step, a polydimethylsiloxane–divinylbenzene fiber in association with PFBHA was finally chosen. The study of the derivatization kinetics showed that the reaction of PFBHA with carbonyl compounds was instantaneous, except for acetone. Analyses were performed by gas chromatography coupled with flame ionization detection and mass spectrometry. For 5 min fiber exposure, the limits of detection are below 0.5 μg m^-3 in selected ion monitoring mode, the reproducibility was 15 % on average, and the linearity of the calibration curves was satisfactory. For on-site application, the influence of air humidity and the conditions in which the impregnated fibers were stored were studied. It is possible to store the fibers for 3 days before and for at least 2 days after sampling. The relative humidity of air was shown to have no influence on solid-phase microextraction sampling in the range from 0 to 70 %. For formaldehyde, the method was compared with sampling on 2,4-dinitrophenylhydrazine cartridges, and the first results showed good agreement. Finally, the method was applied to three different indoor environments to check its feasibility.