Eco‐friendly ionic liquid assisted capillary electrophoresis and α‐acid glycoprotein‐assisted liquid chromatography for simultaneous determination of anticancer drugs in human fluids

In the current work, two eco‐friendly analytical methods based on capillary electrophoresis (CE) and reversed phase liquid chromatography (RPLC) were developed for simultaneous determination of the most commonly used anticancer drugs for Hodgkin's disease: methotrexate (MTX), vinblastine, chlorambucil and dacarbazine. A background electrolyte (BGE) of 12.5 mmol/L phosphate buffer at pH 7.4 and 0.1 µmol/L 1‐butyl‐3‐methyl imidazolium bromide (BMImBr) ionic liquid (IL) was used for CE measurements at 250 nm detection wavelength, 20 kV applied voltage and 25 °C. The rinsing protocol was significantly improved to reduce the adsorption of IL on the interior surface of capillary. Moreover, RPLC method was developed on α‐1‐acid glycoprotein (AGP) column. Mobile phase was 10 mmol/L phosphate buffer at pH 6.0 (100% v/v) and flow rate at 0.1 mL/min. As AGP is a chiral column, it was successfully separated l ‐MTX from its enantiomer impurity d ‐MTX. Good linearity of quantitative analysis was achieved with coefficients of determinations (r²) >0.995. The stability of drugs measurements was investigated with adequate recoveries up to 24 h storage time under ambient temperature. The limits of detection were <50 and 90 ng/mL by CE and RPLC, respectively. The using of short‐chain IL as an additive in BGE achieved 600‐fold sensitivity enhancement compared with conventional Capillary Zone Electrophoresis (CZE). Therefore, for the first time, the proposed methods were successfully applied to determine simultaneously the analytes in human plasma and urine samples at clinically relevant concentrations with fast and simple pretreatments. Developed IL‐assisted CE and RPLC methods were also applied to measure MTX levels in patients’ samples over time. Copyright © 2014 John Wiley & Sons, Ltd.     

Multiplicative linear search for a brownian target motion

This paper investigates a search problem for a brownian target motion on one of n-intersected real lines in which any information of the target position is not available to the searchers all the time. We have n-searchers start searching for the target from the origin that is the intersection point of these lines. Each of the searchers moves continuously along his line in both directions of the starting point. The purpose of this paper is to formulate a search model and find the condition under which the expected value of the first meeting time between one of the searchers and the target is finite. Also, we show the existence of the optimal search plan which minimizes the expected value of the first meeting time and find it.     

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis (2013–2015)

This review updates and follows‐up a previous review by highlighting recent advancements regarding capillary electromigration methodologies and applications in pharmaceutical analysis. General approaches such as quality by design as well as sample injection methods and detection sensitivity are discussed. The separation and analysis of drug‐related substances, chiral CE, and chiral CE‐MS in addition to the determination of physicochemical constants are addressed. The advantages of applying affinity capillary electrophoresis in studying receptor–ligand interactions are highlighted. Finally, current aspects related to the analysis of biopharmaceuticals are reviewed. The present review covers the literature between January 2013 and December 2015.     

Preparation of some chitosan heavy metal complexes and study of its properties

The chitosan was prepared and mixed with some metal salts (FeCl₃, Co(OAc)₂ and NiCl₂) by different concentrations to form chitosan-metal complexes. The metal ions which strongly complexed to the amino groups of chitosan like Fe showed a smooth surface product, amorphous phase, thermally more stable and high electrical conductivity than other complexes, while the Co ions which the weakly complexed with chitosan showed a rough surface product, crystalline phase, thermally less stable and low electrical conductivity. The chitosan-metal complexes have a higher electrical conductivity than chitosan pure at room temperature.     

Simultaneous separation and determination of Tarabine PFS and Adriblastine using micellar electrokinetic chromatography and high performance liquid chromatography. Application to some biological fluids

The simultaneous determination of Tarabine PFS and Adriblastine by two independent techniques, viz. micellar electrokinetic chromatography (MEKC) and high performance liquid chromatography (HPLC), has been studied. For MEKC analysis, separations and identifications were accomplished using uncoated fused-silica capillaries and injections were performed in the hydrodynamic mode. The running buffer consisted of 0.05 M borate/phosphate pH 8.70, with 0.10 M SDS at an operating voltage of 15.0 kV and the temperature held at 25.0 degrees C. Under these conditions, the migration times of Tarabine PFS and Adriblastine were 2.70 and 6.40 min, respectively. Calibration curves were established for 0.010-0.300 microg/mL (r = 0.99) Tarabine PFS and 8.000-120.0 microg/mL (r = 0.99) Adriblastine. The limit of detection (LOD) was estimated and found to be 0.003 and 3.000 microg/mL of Tarabine PFS and Adriblastine, respectively. The limit of quantitation (LOQ) was found to be 0.009 and 8.000 microg/mL of Tarabine PFS and Adriblastine, respectively. For HPLC analysis, separations and determinations were performed on teicoplanin stationary phase with reversed mobile phase containing methanol:buffer pH 4.05 (20.0:80.0%, v/v) at 285 nm. Calibration curves were established for 3.000-90.00 microg/mL (r = 0.99) Tarabine PFS and for 10.00-120.0 microg/mL (r = 0.99) Adriblastine. LOD and LOQ were estimated and found to be 0.950 and 2.050 microg/mL of Tarabine PFS and 3.130 and 9.250 microg/mL of Adriblastine, respectively. Both MEKC and HPLC methods were applied for the simultaneous determination of analytes in urine samples. It was found that 8.00-10.0% (Tarabine PFS) and 13.0-15.0% (Adriblastine) of the injected dose was recovered in urine samples with 99.5-102% recovery.     

Bis-dioxomolybdenum (VI) oxalyldihydrazone complexes: Synthesis,characterization, DFT studies,catalytic epoxidation potential,molecular modeling and biological evaluations

Two cis-bis-dioxomolybdenum oxalylsalicylidenedihydrazone complexes (MoO₂L1 and MoO₂L2) were synthesized via the complexation of dioxomolybdenum (VI) acetylacetonate with oxalylsalicylidenedihydrazone (H₂L1) and p-sodium sulfonate oxalylsalicylidenedihydrazone (H₂L2) bis-Schiff base chelating ligands, respectively. The structures of the newly synthesized complexes were confirmed by ¹H- and ¹³C-NMR, IR, ultraviolet–visible and mass spectra, as well as elemental analyses (EA) and conductivity measurements. The spectrophotometric continuous variation method revealed the formation of 2: 1 (metal: ligand molar ratios). DFT studies were applied for the ligands and their Mo-chelates. Interestingly, the bis-MoO₂(VI) oxalyldihydrazone complexes showed remarkable catalytic sufficiency towards the selective (ep)oxidation of 1,2-cyclooctene, benzyl alcohol and thiophene using H₂O₂ or tert-butyl hydroperoxide (tBuOOH) at 85 °C. Under aqueous conditions, the MoO₂L2 (with p-sodium sulfonate substituent) exhibited superior that of the MoO₂L1 (without p-NaSO₃―group), highlighting the role of sodium sulfonate substituent in the catalytic progress of the Mo-chelate. The ligands (H₂L1 and H₂L2) and their corresponding Mo-complexes (MoO₂L1 and MoO₂L2) were assessed for their antitumor and antimicrobial activities. Furthermore, the antioxidant activity was also evaluated using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and superoxide dismutase (SOD) assays. The binding nature between the Mo-complexes and calf thymus DNA (ctDNA) was also studied within spectroscopic and hydrodynamic techniques.     

Use of short chain alkyl imidazolium ionic liquids for on‐line stacking and sweeping of methotrexate,flinic acid and folic acid: Their application to biological fluids

Methotrexate (MTX) is widely used for the treatment of many types of cancer. Folinic acid (FNA) and folic acid (FA) were usually simultaneously supplemented with MTX to reduce the side effects of a folate deficiency. This study, for the first time, included on‐line sample preconcentration by stacking and sweeping techniques under reduced or enhanced electric conductivity in the sample region using short chain alkyl imidazolium ionic liquids (ILs) as micelle forming agents for analyte focusing. Both analyte focusing by micelle collapse (AFMC) and sweeping‐MEKC had been investigated for the comparison of their effectiveness to examine simultaneously MTX, FNA and FA in plasma and urine under physiological conditions. In sweeping‐MEKC, the sample solution without micelles was hydrodynamically injected as a long plug into a fused‐silica capillary pre‐filled with phosphate buffer containing 3.0 mol/L of 1‐butyl‐3‐methylimidazolium bromide (BMIMBr). Using AFMC, the analytes were prepared in BMIMBr micellar matrix and hydrodynamically injected into the phosphate buffer without IL micelles. The conductivity ratio between BGE and sample (γ, BGE/sample) was optimized to be 3.0 in sweeping‐MEKC and 0.33 in AFMC resulting the adequate separation of analytes within 4.0 min. To reduce the possibility of BMIMBr adsorption, an appropriate rinsing protocol was used. The limits of detection were calculated as 0.1 ng/mL MTX, 0.05 ng/mL FNA and 0.05 ng/mL FA by sweeping‐MEKC and 0.5 ng/mL MTX, 0.3 ng/mL FNA and 0.3 ng/mL FA by AFMC. The accuracy was tested by recovery in plasma and urine matrices giving values ranging between 90 and 110%. Both stacking and sweeping by BMIMBr could be successfully used for the rapid, selective and sensitive determination of pharmaceuticals in complex matrices due to its fascinating properties, including high conductivity, good thermal stability and ability to form different types of interactions by electrostatic, hydrophobic, hydrogen bonding and π–π interactions. In sweeping‐MEKC, the using of BMIMBr enhanced the γ factor, k retention factor and the injected amount of sample. Consequently, this technique offers particular potential for higher sensitivity by giving 22‐ and 5‐fold sensitivity enhancement factors (SEFs) of MTX compared to CZE and AFMC, respectively.