Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 μL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.     

Ornamental Plant Efficiency for Heavy Metals Phytoextraction from Contaminated Soils Amended with Organic Materials

Accumulation of heavy metals (HMs) by ornamental plants (OPs) from contaminated agriculture soils is a unique technique that can efficiently reduce the metal load in the food chain. Amaranthus tricolor L. has attractive characteristics acquiring a higher growth rate and large biomass when grown at heavy metal contaminated soils. Site-specific detailed information is not available on the use of A. tricolor plant in metal phytoremediation from the polluted sites. The study aimed to enhance the uptake of HMs (Pb, Zn, and Cu) via amending poultry litter extract (PLE), vinasse sugarcane (VSC), and humic acid (HA) as natural mobilized organic materials compared to ethylene diamine tetraacetic acid (EDTA), as a common mobilized chemical agent by A. tricolor plant. The studied soils collected from Helwan, El-Gabal El-Asfar (Cairo Governorate), Arab El-Madabeg (Assiut Governorate), Egypt, and study have been conducted under pot condition. Our results revealed all organic materials in all studied soils, except EDTA in EL-Gabal El-Asfar soil, significantly increased the dry weight of the A. tricolor plant compared to the control treatment. The uptake of Pb and Zn significantly (p > 0.05) increased due to applying all organic materials to the studied soils. HA application caused the highest uptake as shown in Pb concentration by more than 5 times in Helwan soil and EDTA by 65% in El-Gabal El-Asfar soil while VSC increased it by 110% in El-Madabeg soil. Also, an increase in Zn concentration due to EDTA application was 58, 42, and 56% for Helwan, El-Gabal El-Asfar, and El-Madabeg soil, respectively. In all studied soils, the application of organic materials increased the remediation factor (RF) than the control. El-Madabeg soil treated with vinasse sugarcane gave the highest RF values; 6.40, 3.26, and 4.02% for Pb, Zn, and Cu, respectively, than the control. Thus, we identified A. tricolor as a successful ornamental candidate that, along with organic mobilization amendments, most efficiently develop soil health, reduce metal toxicity, and recommend remediation of heavy metal-contaminated soils. Additionally, long-term application of organic mobilization amendments and continued growth of A. tricolor under field conditions could be recommended for future directions to confirm the results.     

Exogenous Sodium Nitroprusside Mitigates Salt Stress in Lentil (Lens culinaris Medik.) by Affecting the Growth,Yield, and Biochemical Properties

Soil salinity disrupts the physiological and biochemical processes of crop plants and ultimately leads to compromising future food security. Sodium nitroprusside (SNP), a contributor to nitric oxide (NO), holds the potential to alleviate abiotic stress effects and boost tolerance in plants, whereas less information is available on its role in salt-stressed lentils. We examined the effect of exogenously applied SNP on salt-stressed lentil plants by monitoring plant growth and yield-related attributes, biochemistry of enzymes (superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD)) amassing of leaf malondialdehyde (MDA) and hydrogen peroxide (H₂O₂). Salinity stress was induced by NaCl application at concentrations of 50 mM (moderate salinity) and 100 mM (severe salinity), while it was alleviated by SNP application at concentrations of 50 µM and 100 µM. Salinity stress severely inhibited the length of roots and shoots, the relative water content, and the chlorophyll content of the leaves, the number of branches, pods, seeds, seed yield, and biomass per plant. In addition, MDA, H₂O₂ as well as SOD, CAT, and POD activities were increased with increasing salinity levels. Plants supplemented with SNP (100 µM) showed a significant improvement in the growth- and yield-contributing parameters, especially in plants grown under moderate salinity (50 mM NaCl). Essentially, the application of 100 µM SNP remained effective to rescue lentil plants under moderate salinity by regulating plant growth and biochemical pathways. Thus, the exogenous application of SNP could be developed as a useful strategy for improving the performance of lentil plants in salinity-prone environments.     

Quantification of Total Phenols and Antioxidants in Coffee Samples of Different Origins and Evaluation of the Effect of Degree of Roasting on Their Levels

Phenolic and antioxidant compounds have received considerable attention due to their beneficial effects on human health. The aim of this study is to determine the content of total phenols and antioxidants in fifty-two coffee samples of different origins, purchased from the Jordanian local market, and investigate the effect of the degree of roasting on the levels of these compounds. The coffee samples were extracted using the hot water extraction method, while Folin–Ciocalteu (FC) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay methods were used to analyze these compounds. The results showed that the highest content of total phenol (16.55 mg/g equivalent to GAE) was found in the medium roasted coffee, and the highest content of antioxidants (1.07 mg/g equivalent to TEAC) content was found in the green coffee. Only light and medium roasted coffee showed a significant correlation (p < 0.05, R² > 0.95) between the average of total phenolic and antioxidant content. A negative correlation between the antioxidant content and the degree of roasting (p < 0.05, R² > 0.95) were shown, while it did not correlate with phenolic contents. Previously, a positive correlation between antioxidant and chlorogenic acids content was observed, with no correlation between the origin of coffee samples nor heavy metal content, which was previously determined for the same coffee samples. These findings suggest that the antioxidant content for coffee extracts is largely determined by its chlorogenic acid content, rather than the coffee origin or total phenolic and heavy metals content.     

Recent developments and comparison of transformation strategies for organic halides to aldehydes and ketones

Molecular Diversity - Aldehydes and ketones are parts of millions of compounds and are important classes of chemicals which serve as important precursors for the synthesis of library of compounds....     

Spatial-dependent probe transmission based high-precision two-dimensional atomic localization

Herein, we propose a scheme for the realization of two-dimensional atomic localization in aλ-type three-level atomic medium such that the atom interacts with the two orthogonal standing-wave fields and a probe field. Because of the spatially dependent atom-field interaction, the information about the position of the atom can be obtained by monitoring the probe transmission spectra of the weak probe field for the first time. A single and double sharp localized peaks are observed in the one-wavelength domain. We have theoretically archived high-resolution and high-precision atomic localization within a region smaller thanλ/25×λ/25. The results may have potential applications in the field of nano-lithography and advance laser cooling technology.     

Efficient two-dimensional atom localization in a five-level conductive chiral atomic medium via birefringence beam absorption spectrum

We have theoretically investigated two-dimensional atom localization using the absorption spectra of birefringence beams of light in a single wavelength domain.The atom localization is controlled and modified through tunneling effect in a conductive chiral atomic medium with absorption spectra of birefringent beams.The significant localization peaks are investigated in the left and right circularly polarized beam.Single and double localized peaks are observed in different quadrants with minimum uncertainty and significant probability.The localized probability is modified by controlling birefringence and tunneling conditions.These results may be useful for the capability of optical microscopy and atom imaging.     

Physicochemical investigation of sulfonamide-derived compounds interacting with conventional cationic surfactants in aqueous media

The sulfonamide core in compounds is effective synthons, which offer exciting perspectives in chemotherapeutic and pharmacological research. In this study, we investigated the molecular interaction of potent sulfonamide derivatives (SDs), 2-benzenesulfonamido-3-methylbutyric acid (BSB) and tetraaquabis{3-methyl-2-[(phenylsulfonyl)amino]butanoate}copper(II) (Cu-BSB), with cationic surfactants, cetyltrimethyl ammonium bromide (CTAB) and ethylhexadecyl dimethyl ammonium bromide (EHDAB), using UV-visible spectroscopy and steady-state fluorescence measurements. Various mathematical models were applied to quantify the effect of cationic surfactants on physicochemical characteristics of BSB and Cu-BSB. These interactions were confirmed by estimating the partition coefficient (K_x), binding capacities (K_b), Stern-Volmer quenching constant (K_sv), and related Gibbs free energies (ΔG_b). The in-depth mechanism revealed that the binding mode in SD–surfactants combinational system is spontaneous and quenching exists in static mode initiated by ground-state complex formation. We believe that the true knowledge of host–guest interaction mechanisms concerning model membrane with entrapped moiety can help in better understanding of molecular recognition in related phospholipid membrane models.