Coulometric determination of NAD+ and NADH in normal and cancer cells using LDH, RVC and a polymer mediator

An electrochemical method for the measurement of NAD(+) and NADH in normal and cancer tissues using flow injection analysis (FIA) is reported. Reticulated vitreous carbon (RVC) electrodes with entrapped l-lactate dehydrogenase (LDH) and a new redox polymer containing covalently bound toluidine blue O (TBO) were employed for this purpose. Both NAD(+) and NADH were estimated coulometrically based on their reaction with LDH. The latter was immobilized on controlled pore glass (CPG) by cross-linking with glutaraldehyde and packed within the RVC. The concentrations of NAD(+) and NADH in the tissues, estimated using different electron mediators such as ferricyanide (FCN), meldola blue (MB) and TBO have also been compared. The effects of flow rate, pH, applied potential (versus Ag/AgCl reference) and adsorption of the mediators have also been investigated. Based on the measurements of NAD(+) and NADH in normal and cancer tissues it has been concluded that the NADH concentration is lower, while the NAD(+) concentration is higher in cancer tissues. Amongst the electron mediators TBO was found to be a more stable mediator for such measurements.     

Gas phase photoisomerization of urocanic acid – a theoretical study

The photochemistry of urocanic acid is investigated theoretically by means of time-dependent density functional theory. The topology of the potential energy surface along the isomerization pathway and close to the Franck–Condon region is investigated and consequences for the photoisomerization reactions are outlined. A recently published supersonic jet spectroscopy study is reinterpreted in the light of these and earlier theoretical results to give a clear picture of the gas phase photochemistry. It is found that the photochemistry of the two isomers is fundamentally different, in contrast to the situation in solution.     

Evaluation of partition measurements in liquid-liquid segmented flow

The different configurations possible for an FIA extraction system for partition measurements have been tested and the corresponding evaluation formulae based on determinations at different phase flow ratios, verified. Increased flexibility results from the possibility of using samples dissolved in either aqueous or organic phase. Choosing the best configuration in every case makes it possible to extend the range of measurable conditional partition constants without excessive losses in precision.     

Double photoionisation spectra of small molecules and a new empirical rule for double ionisation energies

Complete double photoelectron spectra are presented for 18 small molecules where the location of charges in the cations and dications is relatively clearly defined. The data demonstrate the importance of a coulombic repulsion contribution to the double ionisation energies. Examination of data for a wide range of molecules leads to a new empirical rule to calculate double ionisation energies from the molecules’ single ionisation energies and maximum dimensions. Where single and double ionisation energies are known the rule allows the deduction of plausible intercharge distances.     

Evaluation of a dialysis probe for continuous sampling in fermentors and in complex media

A dialysis probe is described for continuous sampling from complex solutions, such as fermentation broth, milk or waste water, to yield samples suitable for liquid chromatography, flow injection analysis, enzyme calorimetry, etc. The analyte is transferred to a flow stream separated from the sample by a dialysis membrane that is protected from fouling by a strong tangential flow of the sample solution. This flow is accomplished by placing a magnetic stirring bar close to the membrane surface. The device is constructed of materials permitting the probe to be steam-sterilized when mounted inside a fermentor.     

Studies of two-phase equilibria by liquid-liquid segmented flow extraction of dithiocarbamic acids into various solvents

A method for the study of two-phase equilibria by extraction in liquid-liquid segmented flow is presented. The main advantage of the method is the very rapid equilibration achieved. In many cases a contact time of 5 sec is sufficient. By performing the measurements needed on-line with the extraction the total residence time of a substance studied in the system can be kept below 10 sec. This makes it possible to study two-phase equilibria of moderately unstable compounds. Other advantages are the semi-enclosed design, which minimizes contact with solvent fumes and increases the speed of operation after the system has been set up. The system has been used for a study of the two-phase equilibria of dithiocarbamic acids. The dithiocarbamates are often used for the separation and preconcentration of metals, and co-extraction of the reagent can cause severe interference in the final determination. By means of the extraction constants presented, the extraction of diethyldithiocarbamic acid and pyrrolidine-dithiocarbamic acid into Freon 113, carbon tetrachloride, methyl isobutyl ketone and chloroform can be estimated.     

Comparison of segmentors for liquid-liquid extraction flow-injection analysis

The segmentation of two immiscible solvents in a continuous liquid—liquid extraction flow system has been studied with a computer-controlled photometric detection system (resolution time 3 msec). The T-shaped segmentors tested were made of fluoroplastic, glass (A4-T fitting) and a modified glass (A8-T fitting). The modified A8-T fitting gave the most repeatable segmentation (rsd 2%).     

Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers

Under certain conditions, such as sufficiently low temperatures, high loading rates and/or highly triaxial stress states, glassy polymers display an unfavorable characteristic—brittleness. A technique used for reducing the brittleness (increasing the fracture toughness) of these materials is rubber toughening. While there is significant qualitative understanding of the mechanical behavior of rubber-toughened polymers, quantitative modeling tools for the large-strain deformation of rubber-toughened glassy polymers are largely lacking.In this paper, we develop a suite of numerical tools to investigate the mechanical behavior of rubber-toughened glassy polymers, with emphasis on rubber-toughened polycarbonate. The rubber particles are modeled as voids in view of their deformation-induced cavitation early during deformation. A three-dimensional micromechanical model of the heterogeneous microstructure is developed to study the effects of initial rubber particle (void) volume fraction on the underlying elasto-viscoplastic deformation mechanisms in the material, and how these mechanisms influence the macroscopic response of the material. A continuum-level constitutive model is developed for the large-strain elasto-viscoplastic deformation of porous glassy polymers, and it is calibrated against micromechanical modeling results for porous polycarbonate. The constitutive model can be used to study various boundary value problems involving rubber-toughened (porous) glassy polymers. As an example, the case of an axisymmetric notched bar is simulated for the case of polycarbonate with varying levels of initial porosity. The quality of the constitutive model calibration is assessed using a multi-scale modeling approach.     

Constructive cooperative coevolution for large-scale global optimisation

This paper presents the Constructive Cooperative Coevolutionary (\(\mathrm {C}^3\)) algorithm, applied to continuous large-scale global optimisation problems. The novelty of \(\mathrm {C}^3\) is that it utilises a multi-start architecture and incorporates the Cooperative Coevolutionary algorithm. The considered optimisation problem is decomposed into subproblems. An embedded optimisation algorithm optimises the subproblems separately while exchanging information to co-adapt the solutions for the subproblems. Further, \(\mathrm {C}^3\) includes a novel constructive heuristic that generates different feasible solutions for the entire problem and thereby expedites the search. In this work, two different versions of \(\mathrm {C}^3\) are evaluated on high-dimensional benchmark problems, including the CEC’2013 test suite for large-scale global optimisation. \(\mathrm {C}^3\) is compared with several state-of-the-art algorithms, which shows that \(\mathrm {C}^3\) is among the most competitive algorithms. \(\mathrm {C}^3\) outperforms the other algorithms for most partially separable functions and overlapping functions. This shows that \(\mathrm {C}^3\) is an effective algorithm for large-scale global optimisation. This paper demonstrates the enhanced performance by using constructive heuristics for generating initial feasible solutions for Cooperative Coevolutionary algorithms in a multi-start framework.